Lazer Concepts Taillight Graphex @ Auto Parts & Accessories online store

Lazer Concepts Taillight Graphex

TAILLIGHT GRAPHEX Add a custom look while ensuring maximum illumination Meet DOT specifications Unusual accents set your truck apart from the rest! Plastic graphics are laser cut for superior sharpness and definition. Durable construction won't crack or fade. Flexible enough to conform to truck's lenses. Install easily with 3M� tape. No drilling required. Manufacturer's limited one-year warranty. Sold in pairs. An officially licensed GM product by Lazer Concepts. Applications:1993-1997 Ford Ranger

SUNBURST SUNSHADE� The "hot" way to a cool interior�reduces interior heat by an amazing 70%! Made of durable reflective metallic foil over lightweight PE bubble material Red/yellow/orange flames designed by renowned automotive artist Art Himsl A real attention getter and a great way to protect your vehicle's interior against the sun's damaging heat and rays. Helps prevent upholstery and dash fade and deterioration. Makes getting into your parked vehicle on sweltering summer afternoons a lot more pleasant. Slips in easily and is held in place by your visors. This sunshade is the perfect complement to our other flames accessories (sold separately). Fits most vehicles�measures approximately 50"W x 23-3/8"H. Applications: All Makes All Models

CHROME-PLATED WATER NECK Includes chromed bolts For '55-87 V8 engines Applications: Chrysler Cordoba V8, Chrysler Lebaron V8, Chrysler 300 V8, Chrysler Imperial V8, Chrysler Town & Country V8, Chrysler Newport V8, Chrysler New Yorker V8

NYLON-BELTED "V" RATED TIRES Withstand speeds up to 149 mph Durable 4-ply nylon cord construction Computer-designed and specially formulated matching front and rear tires Aggressive tread design ensures dependable straight-line traction (wet or dry) and safer cornering. Special multi-rubber compound is softer on the side (for even better cornering ability) and harder in the center (for increased mileage). Created for full-dress touring motorcycles but can be used on any street or sport cycle. Formulated of special compounds (using various top grades of rubber) for durability. Computer-designed directional treads for sure traction on wet and dry surfaces. Meet or exceed DOT highway specifications. Tubeless design, but may be used on tube-type rims with an inner tube and rim strip (sold separately). How To Order: Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width x Rim Diameter in inches. Applications: All Makes All Models

TUBELESS TIRE SEALANT Liquid sealant both repairs AND prevents flats! It is NOT an aerosol�It IS a nontoxic, nonflammable and environmentally safe blend of fibers, polymers and binders that lasts and lasts Instantly seals punctures up to 1/4"�seal lasts up to 2 years! No more flats! Easy to use�simply remove the valve core using the tool included, inject SLIME�, replace the valve core and reinflate tires. SLIME� evenly coats the inside of your tire for up to 2 years. Won't freeze or dry up. Won't rust or corrode steel rims. Water soluble. BUY A 4-PACK AND SAVE! Applications: All Makes All Models

NITRO 9000 GAS SHOCKS Top performers�even when subjected to the most grueling off-road conditions Radial tuned and velocity-sensitive valved for a great highway ride! The product of over 40 years of engineering excellence, these shocks are tough enough to stand up to almost anything. High-pressure gas charge (up to 200 psi) and spring-loaded piston rods ensure consistent performance and extended service life. Radial-tuned velocity-sensitive 10-stage valving (coil spring adjusts to varying road conditions) plus durable urethane bushing for the smoothest ride. Big 1-3/8" piston (except where space limitations prohibit) and big reservoir cylinder to resist heat and eliminate fade. With all-weather fluid included. For most 2WD and 4WD pickups including trucks with 2" to 8" lift kits. Dust boots not included. Applications:1974-1990 Jeep Cherokee with 2" to 3" lift kit FRONT,1955-1964 Jeep CJ3B with 4" Lift Kit FRONT,1974-1990 Jeep Grand Wagoneer with 2" to 3" lift kit FRONT,1974-1988 Jeep J Series Pickup J10; J20 4WD with 2" to 3" Lift Kit FRONT,1974-1990 Jeep Wagoneer with 2" to 3" lift kit FRONT,1968-1981 Jeep CJ5 with 4" Lift Kit FRONT,1982-1983 Jeep CJ5 with 2" to 3" Lift Kit FRONT,1968-1975 Jeep CJ6 with 4" Lift Kit FRONT,1976-1981 Jeep CJ7 with 4" Lift Kit FRONT,1982-1986 Jeep CJ7 with 2" to 3" Lift Kit FRONT,1981 Jeep Scrambler with 4" Lift Kit FRONT,1982-1985 Jeep Scrambler with 2" to 3" Lift Kit FRONT,1974-1990 Jeep Cherokee with 2" to 3" lift kit FRONT,1955-1964 Jeep CJ3B with 4" Lift Kit FRONT,1974-1990 Jeep Grand Wagoneer with 2" to 3" lift kit FRONT,1974-1988 Jeep J Series Pickup J10; J20 4WD with 2" to 3" Lift Kit FRONT,1974-1990 Jeep Wagoneer with 2" to 3" lift kit FRONT,1968-1981 Jeep CJ5 with 4" Lift Kit FRONT,1982-1983 Jeep CJ5 with 2" to 3" Lift Kit FRONT,1968-1975 Jeep CJ6 with 4" Lift Kit FRONT,1976-1981 Jeep CJ7 with 4" Lift Kit FRONT,1982-1986 Jeep CJ7 with 2" to 3" Lift Kit FRONT,1981 Jeep Scrambler with 4" Lift Kit FRONT,1982-1985 Jeep Scrambler with 2" to 3" Lift Kit FRONT,1974-1990 Jeep Cherokee with 2" to 3" lift kit FRONT,1955-1964 Jeep CJ3B with 4" Lift Kit FRONT,1974-1990 Jeep Grand Wagoneer with 2" to 3" lift kit FRONT,1974-1988 Jeep J Series Pickup J10; J20 4WD with 2" to 3" Lift Kit FRONT,1974-1990 Jeep Wagoneer with 2" to 3" lift kit FRONT,1968-1981 Jeep CJ5 with 4" Lift Kit FRONT,1982-1983 Jeep CJ5 with 2" to 3" Lift Kit FRONT,1968-1975 Jeep CJ6 with 4" Lift Kit FRONT,1976-1981 Jeep CJ7 with 4" Lift Kit FRONT,1982-1986 Jeep CJ7 with 2" to 3" Lift Kit FRONT,1981 Jeep Scrambler with 4" Lift Kit FRONT,1982-1985 Jeep Scrambler with 2" to 3" Lift Kit FRONT

STARTER COVERS Insulate your starter from intense exhaust heat Blocks excessive heat that can destroy starter and solenoid A must for vehicles with high-heat-generating exhaust headers. Withstand temperatures up to 1,000 degrees F without burning, melting or distorting. Covers are approx. 7-1/4" x 22". Select fiberglass starter cover or fiberglass with special heat-reflective aluminized outer cover. Applications: All Makes All Models

HITCH HAUL� CARRIERS Add to vehicle's cargo-carrying capacity for more efficient use of receiver when not towing�easily and inexpensively Safely hold up to 500 lbs. of cargo that's too messy or bulky to carry inside your vehicle Accept bike carrier and other accessories (sold separately). Great for vehicles with crowded interiors. A must when carrying cargo that could ruin interior of vehicle�soil, garden equipment, logs, hunting/fishing gear and more. Features a 20" x 60" heavy-gauge platform with expanded metal mesh floor for easy cleanups (carrier frame without platform sold separately). Enclosed on all 4 sides to prevent cargo from slipping. Extra-heavy bridge supports larger, heavier gear. Hitch pin and clip required (sold separately). Prepunched holes let you mount optional bike carrier and other accessories (sold separately). Limited one-year warranty. Applications: All Makes All Models, All Makes All Models

TIE-DOWN STRAP WITH TENSION BUCKLE Exclusive PowerWeb Plus straps last longer than any other strap! Provide the most hold-down force available! Special edge design and Class R coating maximize protection against cutting, tearing and abrading Secure your cargo with the best! Tension buckle combines the ease of a cambuckle with the superior hold-down force of a ratchet. Buckle uses leverage to more than double the hold-down force of a cambuckle but, unlike ratchets, it cannot be overtightened. Leverage is applied with the tension buckle locked into place after you draw the strap tight. No-mar coated hooks at each end. Applications: All Makes All Models with Tension Buckles and 1;200 lb. Break Strength

BOLT-ON HEAVY-GAUGE STEEL BODIES AND BODY PARTS Replace rusted or dented parts perfectly Choose from a variety of body parts, body kits and shells (spare tire carrier also available) For Jeep� vehicles Primer coated. Normal surface prep required before painting. NOTE: SKU numbers ending in FE are factory shipped by freight truck. SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight. Applications:1987-1995 Jeep Wrangler (exc. '93-95 with Ground Effects),1987-1995 Jeep Wrangler (exc. '93-95 with Ground Effects),1987-1995 Jeep Wrangler (exc. '93-95 with Ground Effects),1987-1995 Jeep Wrangler (exc. '93-95 with Ground Effects),1987-1995 Jeep Wrangler (exc. '93-95 with Ground Effects)

CHROME-PLATED BOW-TIE ENGINE DRESS-UP KIT For '59-86 Chevrolet small-block engines Distinctive bow-tie emblem embossed on the valve covers, breather cap, wing nuts and spark plug looms gives these components their unique appeal All parts are made to GM specifications 20% heavier than aftermarket replacement parts. All, except grommets, are heavily chromed plated and polished to a high luster. Replace originals perfectly. Rubber grommets, dipstick with tube and hold-down clamps included. General Motors trademarks used under license to Specialty Auto Parts USA, Inc. Timing cover and tab sold separately. Applications:1976-1987 Chevrolet El Camino 6-3/4" and 7" balancers,1977-1986 Chevrolet Blazer - Full Size 6-3/4" and 7" balancers,1977-1986 Chevrolet Caprice 6-3/4" and 7" balancers,1976-1986 Chevrolet C/K Pickup 6-3/4" and 7" balancers,1976-1986 Chevrolet Suburban 6-3/4" and 7" balancers,1976-1986 Chevrolet Camaro 6-3/4" and 7" balancers,1976-1986 Chevrolet Monte Carlo 6-3/4" and 7" balancers,1977-1985 Chevrolet Impala 6-3/4" and 7" balancers,1976-1983 Chevrolet Malibu 6-3/4" and 7" balancers,1980-1982 Chevrolet Caprice 6-3/4" and 7" balancers,1980-1982 Chevrolet Impala 6-3/4" and 7" balancers,1979-1982 Chevrolet El Camino 6-3/4" and 7" balancers,1979-1982 Chevrolet Malibu 6-3/4" and 7" balancers,1979-1982 Chevrolet Monte Carlo 6-3/4" and 7" balancers,1980-1981 Chevrolet Bel-Air 6-3/4" and 7" balancer,1980-1981 Chevrolet Camaro 6-3/4" and 7" balancer,1980 Chevrolet Corvette 6-3/4" and 7" balancers,1976-1979 Chevrolet Monza 6-3/4" and 7" balancers,1976-1979 Chevrolet Nova 6-3/4" and 7" balancers,1976 Chevrolet Laguna 6-3/4" and 7" balancers,1975-1976 Chevrolet Monza 6-3/4" and 7" balancer,1975 Chevrolet Nova 6-3/4" and 7" balancer,1975 Chevrolet Vega 6-3/4" and 7" balancer,1967-1968 Chevrolet Camaro 6-3/4" and 7" balancers,1966-1967 Chevrolet Caprice 6-3/4" and 7" balancers,1964-1967 Chevrolet Chevelle 6-3/4" and 7" balancers,1964-1967 Chevrolet El Camino 6-3/4" and 7" balancers,1964-1967 Chevrolet Malibu 6-3/4" and 7" balancers,1962-1967 Chevrolet Nova 6-3/4" and 7" balancers,1961-1967 Chevrolet C/K Pickup 6-3/4" and 7" balancers,1959-1967 Chevrolet Bel-Air 6-3/4" and 7" balancers,1959-1967 Chevrolet Biscayne 6-3/4" and 7" balancers,1959-1967 Chevrolet Impala 6-3/4" and 7" balancers,1961-1966 Chevrolet Suburban 6-3/4" and 7" balancers,1962 Chevrolet Chevy II 6-3/4" and 7" balancers,1959-1961 Chevrolet Corvette 6-3/4" and 7" balancers

DRIVING LIGHT SETS Styled for today's vehicles, these lights are great in both bad weather and under normal driving conditions Sized to fit in the tightest spots Die-cast metal housing with long-lasting glass lenses and replaceable 55-Watt H3 halogen bulbs Same state-of-the-art technology and features as lights costing 2 or 3 times more! Sets include two 180� rotating mounting brackets to simplify installation, 2 lights, dash-mount illuminated LED switch, plug-in wiring harness with relay and fuse and instructions (English, Spanish, French). Limited one-year warranty. Applications: All Makes All Models, All Makes All Models

WATERPROOF HEAT-REFLECTIVE COVER Protects ATV from rain, snow, tree sap, bird droppings, sun's damaging rays and pollutants Silver-covered fabric reflects heat to help keep ATV cooler on the hottest days For small or large 4-wheel ATVs Available for ATVs with or without racks. Strong yet lightweight urethane-coated cover slips on easily. Rustproof, no-mar grommets and tie-down rope (included) keep cover securely in place and help prevent blowaway. All seams are double-stitched and interlocked for superior strength, durability and water resistance. Sewn-in bag for fast, easy and compact storage. Large covers for 200-500cc ATVs (72"L or longer). Small covers for 80-185cc ATVs (up to 72"L). Applications: All Makes All Models, All Makes All Models

TWIN CORE? WIRE SET Patented design incorporates 2 premium stainless steel magnetic core conductors Only 250 Ohms of resistance per foot while suppressing radio interference Blue 100% pure silicone outer jacket to resist harsh under-hood temperatures Stainless steel snap-lock terminals ensure tight, corrosion-free connections. For 4-cylinder engines using 2 spark plugs per cylinder, order 8-cylinder set. Some rare heavy-duty or performance applications may not be available at price shown. Limited lifetime warranty. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: All Makes All Models, All Makes All Models

CHROME-PLATED REPLACEMENT MUFFLERS Help reduce back pressure and restore performance and acceleration Many styles available to add that just right custom touch Choose from a variety of shorty, extra-long, slash-cut, megaphone or turned-out mufflers to dress up your cycle. Applications: All Makes All Models

BRAKE DRUM/ROTOR/CALIPER PAINT Specially-formulated paint is super resistant to heat (up to +900�F), chemicals, road salt, corrosion and brake dust Self-priming, easy spray-on paint A great way to enhance alloy wheels or cover up rusted or corroded brake components Instant color lasts and lasts. Package of two 11-oz. aerosol cans. Applications: All Makes All Models, All Makes All Models, All Makes All Models

EXTENDED RADIUS ARMS 15" longer than factory specs to improve ground clearance Is your Ford lifted up to 6"? These arms are 15" longer than factory specs to improve ground clearance, allowing a sharper turning radius and improved articulation. Rear mounting brackets use a pivoting axis for better off-road performance. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1980-1996 Ford F-Series Pickup F150 Pickup; 2" to 4" lift,1980-1996 Ford Bronco - Full Size 2" to 4" lift

ELECTRIC RACING-STYLE GAUGES Air core movement�super accurate Traditional styling�black face with easy-to-read white characters, black/white pointer Rugged 2-1/16"-diam. gauges have lustrous stainless steel bezel. Back-lit translucent face for superb definition , trouble-free night-time viewing. Red, green and white filters (included) let you match color of existing instrumentation for factory-installed look. 90? sweep. Mount in dash (approx. 2-1/2" depth clearance required) or on- or under-dash with mounting housing or panel (sold separately). Includes all necessary senders, wiring and instructions. Metric adapters not included. For 12-volt negative-ground systems. Applications: All Makes All Models

Manufacturer: Bal
SKU: 15ZX7700A

FLAMES GRAPHICS Red flames add a bold, bright splash of color to the sides of your truck! Big�2 feet long and 8" high! Durable high-density vinyl with super-strong self-adhesive backing Graphics adhere easily, conform beautifully and won't harm vehicle's finish. Sold in pairs. Applications: All Makes All Models

DELUXE HIGHWAY BARS WITH FOLD-UP COMFORT PAD PEGS Custom fit to let you stretch out comfortably on the highway Chrome-plated formed steel highway-bar design follows bike's contours to look like factory option For Honda, Kawasaki and Suzuki models Bars mount securely and easily to either motor mount or frame without cutting, welding or drilling. Foot pegs add extra style, non-slip foot surface, dampen vibration and fold out of the way when not in use. Metal pegs feature hollow core and 4 long-lasting black rubber pads that fit into the core to help absorb road shocks. Pads are secured by a chrome recessed hex-head socket bolt that extends the length of the peg. Included hex wrench lets you rotate peg to suit your preference. Pegs measure 1-1/4" in diam. with approximately 4" foot area. Include mounting hardware and instructions. Sold in pairs. Applications:1995-2000 Kawasaki Vulcan VN800 Classic

DELUXE OVERHEAD STORAGE SHELF Power outlets let you keep your cell phone and radar detector plugged in without dangling cords 3 separate compartments in the molded center section keep most-used things close at hand�no fumbling and digging Cargo nets prevent stored items from falling in your lap All the top storage features you'd expect in a quality overhead console plus lots more! Store more stuff over your head�out of the way, out of sight and within easy reach! Heavy-duty aluminum frame won't warp or bend. Velvet-like finish looks like headliner material. Finish is water, flame, scratch and mar resistant. Easy 4-step installation without drilling: (1) remove sun visors; (2) install brackets in visor holes; (3) mount shelf; (4) reattach visors. Will not fit trucks with double visors (2 visors per side). Features two 12-volt power outlets, built-in compartments, built-in map light and cargo net. Shelf extends across the passenger compartment and a few inches below the roof line and may restrict vision through top part of the windshield. This may be slightly more noticeable for drivers over 6'3" tall driving a smaller truck. For additional technical information, call (800) 743-5348; sorry, orders cannot be placed on this number. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1988-1991 Chevrolet C/K Pickup Crew Cab,1988-1991 GMC C/K Pickup Crew Cab,1973-1991 Chevrolet Blazer - Full Size,1973-1991 Chevrolet Suburban,1973-1991 GMC Jimmy - Full Size,1973-1991 GMC Suburban,1973-1987 Chevrolet C/K Pickup Regular Cab; Crew Cab,1973-1987 GMC C/K Pickup Regular Cab; Crew Cab

STREET TREAD MOTORCYCLE TIRES (TUBE/TUBELESS) Designed for use as a tubeless tires (on mag-style wheels) or tube-type tires (on spoke wheels) High-speed rated tires ("H" rated tires withstand speeds up to 130 MPH) Choose from 2 front and 2 rear tread styles Tubeless tires can be used on tube-type wheels with an inner tube and rim strip (sold separately). Meet or exceed DOT highway specifications. 2-ply nylon cord construction with 4-ply rating (load range "B") or 4-ply construction (load range "B"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual ply construction, except for Styles 3 and 4, which are ply construction. How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width H (tire speed rating) Rim Diameter in inches. (A) 4-ply tread with 3-ply sidewall (B) 3-ply tread with 2-ply sidewall (C) 2-ply tread with 2-ply sidewall Applications: All Makes All Models

STRIP LIGHTS Rigid or flexible, either way these interior/exterior lights will give your vehicle an individual "light" touch Long-lasting 40,000-hour bulbs 12-volt AC or DC low current draw Applications: All Makes All Models, All Makes All Models, All Makes All Models

CUSTOM-FIT BODY STYLING KIT Made of tough, durable RIM polyurethane?virtually unbreakable to withstand everyday bumps and abuse Natural black satin finish looks great as is or can be painted to match your car's colors Every component is designed and engineered to use as many original mounting points as possible to maintain the factory look Here's just what you need to help your car stand out from the crowd! A perfect combination of beauty, fit and toughness. All components fit flush to the factory components, "flowing" smoothly into your car's lines and contours. Complete 4-piece kit includes front air dam, left- and right-side skirts and rear valance (unless stated differently; see NOTES below). Illustration instructions, all mounting hardware and prepping/priming/painting instructions included. For best results, have a professional paint the components in this kit. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in FE are factory shipped by truck freight. NOTES: (1) Includes right and left door panels. (2) Rear bumper cover replaces rear valance. (3) Front bumper replacement replaces front air dam. (4) Air dam includes optional fog light cutouts. (5) Modification of front fascia required to install on V6 models. (6) Air dam includes fog light cutouts. (7) Air dam without fog light option. (8) Rear valance with optional dual exhaust cutout. (9) Smoke-tinted acrylic fog light covers included. (10) Rear valance includes 2 "S" bend exhaust pipes. (11) Exhaust sleeve on left side for V6 models. (12) Replacement rear fascia replaces rear valance. (13) Air dam with brake ducts. Applications:1990-1991 Mitsubishi Eclipse (exc. GSX)

TUNE-UP KIT Top-quality (GM Packard) double-silicone wire set rated at 430� Aramid-fiber inner core for super conductivity Heavy-duty premium-quality distributor cap with solid brass contacts Super duty tune-up kit includes these components plus heavy-duty rotor with brass or RFI coating, original-equipment-style heavy-duty silicone spark plug boots with zinc-coated snap-lock terminals, heavy-duty wire separators and numbers, dielectric grease, tune-up specifications and tips. Limited lifetime warranty on wire sets. Limited one-year warranty on cap and rotor. Applications:1981 Dodge Ram 50 122ci,1982-1983 Dodge Ram 50 2.0L; Vin 8th digit D,1984-1987 Dodge Caravan 2.6L,1984-1987 Dodge Grand Caravan 2.6L,1986-1987 Dodge Mini Ram 2.6L,1987-1989 Mitsubishi Pickup Mighty Max; 2.6L,1984-1987 Plymouth Voyager 2.6L

REPLACEMENT PEDAL PAD SETS Install easily and securely to replace worn, slippery pedal surfaces while improving interior's appearance 2 styles available For air-cooled Volkswagens Applications:1954-1999 Volkswagen Thing,1954-1999 Volkswagen Super Beetle,1954-1999 Volkswagen Squareback,1954-1999 Volkswagen Karmann Ghia,1954-1999 Volkswagen Fastback,1954-1999 Volkswagen 412,1954-1999 Volkswagen 411,1954-1999 Volkswagen Beetle - Air Cooled

STRUT TOWER BRACE KIT Acts as rigid support to help solve unibody flex Sharp under-hood styling Adjustable end for perfect fit and easy bolt-on installation. Aluminum brace. Applications:1987-1992 Mazda RX-7 Front

WHEEL SHOWLIGHTS Dual combination blue and white flashing LEDs with polished billet aluminum colored housing No motion needed to activate! Simply screw onto your tire valve stems and twist! Enhances the look of your wheels for show or on the road! Choose the housing color to match or complement your wheels or color scheme. Each light runs on 3 batteries. Includes 2 lights and 12 batteries. Approximately 3/4"H x 5/8" diameter. Sold in pairs. Package of 12 replacement batteries sold separately (SKU# 48ZX2660T). Check local laws before ordering. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

POLYURETHANE CAB-MOUNT BUSHING SETS Stronger, more durable than rubber; resists extreme heat, cold and friction that can weaken stock parts For 2WD and 4WD trucks Eliminate "play" between body and frame. Assure better control of vehicle by reducing body sway during rough off-road use. A must to maintain matching chrome trim lines when installing lift kits. Steel ring inserts are molded into main support bushings for added durability. Includes bushings, washers and bolts, where required. Applications:1972-1992 Plymouth Trailduster,1972-1992 Dodge Ramcharger,1972-1992 Plymouth Trailduster,1972-1992 Dodge Ramcharger

DUAL VENTED FULL-FACE HELMET Save 20% on Selected Items! Replacement face shield, side pods (including mounting hardware) and helmet bag sold separately Refer to HELMET SIZING CHART A (see below) Stronger and lighter than fiberglass helmets! Outer shell and chin bar are made of Teanex��a unique alloy of polycarbonate and other materials that's stronger and dissipates impact energy better than fiberglass or conventional polycarbonate. Helmet and integral padded/lined chin bar are 1-pc. design. Extra-large window for unobstructed viewing. Fingertip-adjustable chin-bar and forehead vents for unrestricted air circulation. Black nylon chin strap features soft cushion on sides and under chin to minimize chafing. Cushioned neck roll with black vinyl lower panel helps block elements. Extra-thick cheek padding. Comfortable foam interior is lined with black brushed microfiber nylon. Perforated lining is sweat resistant and moisture absorbent. Can be removed and machine washed. Outer shell is sanded smooth, then painted with premium paint. Metallics are achieved with super-fine flakes for a deep luster. High-gloss clear polyurethane coating protects the painted finish and allows easy soap and water cleanup. Contoured to fit perfectly 1-pc. polystyrene inner shell helps absorb any shocks not absorbed by the outer shell. Flip-up ratcheting face shield is made of clear optical-quality, injection-molded Lexan�, treated to resist scratches. Shield has center tab for 1-finger adjustments. Multi-position ratchet assembly is hidden under screw-on plastic side pods (painted to match helmet). Black rubber base and window trim. Snell certified. Meets or exceeds DOT specifications. Soft, padded nylon bag with locking drawstring closure is included to protect stored helmet. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models, All Makes All Models

LARGE- AND EXTRA-LARGE-CAPACITY PORTABLE TOILETS Self-contained Choose large- or extra-large capacity; toilet chemicals and tissue sold separately Compact and lightweight Strong, high-density polyethylene tanks snap together securely�no screws or holes to cause leaks. Unique flushing style: 3-way spray cleans entire bowl quickly, with minimum water. Plunger-type water pump. Upper and lower tanks (each with handle) separate for easy emptying. Lid and seat detach for trouble-free cleaning. Positive-seal gate valve. Applications: All Makes All Models

REPAIR AND SERVICE MANUALS Save money by doing repairs yourself! Contain complete facts on maintenance, tuning, troubleshooting and more plus wiring diagrams, specs and illustrations For motorcycles, ATCs, ATVs and mopeds Applications: All Makes All Models, All Makes All Models, All Makes All Models

CHROME-PLATED STREETTUBES� FLUSH-MOUNT SIDE BARS Pickup will look like it's been lowered about 3" and you don't have to do a thing to your stock suspension! Custom fit mandrel-bent 3" diameter steel tubing with 0.065" wall thickness (much thicker than the 0.049" industry standard) Side bars look great for years?only the finest chrome plating is used Bolt-on no-drill brackets for easy frame-mount installation. Easy to install using common hand tools. Complete with galvanized hardware and instructions. Limited 5-year warranty. Sold in pairs. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in FE are factory shipped by truck freight. Applications:2002-2003 Dodge Pickup - Full Size Cab Type: Standard Cab; Bed Type: Short Bed; Sub Model: Ram 1500,2002-2003 Dodge Pickup - Full Size Cab Type: Standard Cab; Bed Type: Short Bed; Sub Model: Ram 1500

MOLDED SPONGE RUBBER WEATHERSTRIPPING For car and truck doors, trunks and windows Replaces worn, deteriorated originals Stops leaks and drafts High-quality automotive grade rubber. To receive a weatherstrip sample, call (877) 927-7427. Applications:1973-1987 Chevrolet C/K Pickup,1973-1987 GMC C/K Pickup,1973-1987 Chevrolet Blazer - Full Size,1973-1987 GMC Jimmy - Full Size,1973-1987 Chevrolet C/K Pickup,1973-1987 GMC C/K Pickup,1973-1987 Chevrolet Blazer - Full Size,1973-1987 GMC Jimmy - Full Size

HEAVY-DUTY DENIM RACING BENCH SEAT COVER Stretch black poly-cotton back and side panels for a smooth, snug fit Strong, comfortable denim covers top of seat cushion (solid black) and face of seat back (checkered pattern) Black-and-white checkered seat back looks like the familiar race flag The only choice for true race fans! Every time you stop inside your pickup you'll remember that famous phrase, "Ladies and gentlemen, start your engines." It's a fun way to get you going each day and an eye-catching way to dress-up your interior. Cover slips on easily and is held in place with elastic straps and "S" hooks. Applications: All Makes All Models

ILLUMINA ADJUSTABLE PERFORMANCE STRUT 5-position externally adjustable from soft to maximum control with just the turn of a screwdriver Lets you fine-tune your suspension to your riding style and changing road conditions Unlike the competition that simply changes rebound damping, this strut uses a calibrated bypass/shutter valve system that changes both rebound and compression damping SIMULTANEOUSLY! Tokico�the undisputed leader in overall performance and adjustment ease�offers the ultimate strut for everything from daily driving to autocross to drag racing! Adjustments are more consistent and more precise than other struts. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1995-1999 Mitsubishi Eclipse

LOWER REAR FLOOR BAR Get improved handling plus the look and feel Sport Compact owners want! Acts as a brace between each side of the chassis, ensuring a more rigid chassis & a stiffer suspension Adjustable to fit in any car! Mounts in a central spot in your car between the front and rear seat floor. Bolts into your seat-belt mount. Applications: All Makes All Models, All Makes All Models, All Makes All Models

WHEEL ADAPTERS Use larger tires for improved ride, comfort and traction. TO DETERMINE BOLT CIRCLE: Measure from the outer edge of one hole to the outer edge of the hole next to it to find stud width. 2-3/4" stud width = 4-3/4" bolt circle; 2-5/8" = 4-1/2" bolt circle. Select adapter for your specific Volkswagen. Order chromed lug nuts separately. Set of 5. Applications:1968-1979 Volkswagen Super Beetle,1952-1979 Volkswagen Karmann Ghia,1952-1979 Volkswagen Beetle - Air Cooled

DUSTER DECK COVERS Protect back seat area from sun, rain and dust Prevent valuables from flying out of vehicle on- or off-road Matches all Bestop� accessories for "total look" Great prevention against fading and deterioration. Reduces wind resistance to improve gas mileage while providing a clean, smooth appearance. (A) For vehicles with factory soft top; covers folded bow assembly. (B) For vehicles with factory hardtop removed; includes belt rail attachment. (C) Fits only with Bestop� Supertop�; covers folded bow assembly. Applications:1987-1991 Jeep Wrangler,1980-1986 Jeep CJ7

4WD-TO-2WD CONVERSION KIT WITH HUBS Reduces power loss and wear and tear on the driveline Saves fuel�go further on a tank of gas For '73-79 full-time 4WDs with new process 203 transfer case Easy to install using common hand tools. Normal high and low range selection not affected. Use stock lever to select 2WD or 4WD�no extra lever needed. No need to remove transfer case. Kit includes coupling gears, 2 all-metal MileMarker? locking hubs, bearings, washers, gasket and instructions. Applications:1973-1979 Ford F-Series Pickup 3/4-ton with Bolt-on Hubs,1973-1979 GMC C/K Pickup 3/4-ton with Bolt-on Hubs,1973-1979 Chevrolet C/K Pickup 3/4-ton with Bolt-on Hubs

MASTER CYLINDER COVERS Custom-look chromed covers available for different size covers and reservoirs It is important to measure before ordering For General Motors, Ford and Chrysler product cars and trucks All replace original cover perfectly, except rectangular covers for late-model General Motors cars and trucks. Rubber gasket not included. For GM master cylinders with equal reservoirs and single bail clip. 2-3/8" x 5". For GM master cylinders with unequal reservoirs and single bail clip. 3" x 5-5/8". For GM master cylinders with equal reservoirs and dual bail clip. 3" x 5-3/4". For late-model GM cars and trucks with rectangular covers. Available in 3-1/2" x 6" or 4-1/2" x 6-7/8". For Ford, Lincoln, Mercury cars and trucks with 2-3/4" x 5-3/4" cover. For Chrysler, Dodge and Plymouth cars and trucks with 3-1/4" x 6-1/8" cover. Applications: Buick All Models Master Cylinders with Equal Reservoirs & Single Bail Clip, Cadillac All Models Master Cylinders with Equal Reservoirs & Single Bail Clip, Pontiac All Models Master Cylinders with Equal Reservoirs & Single Bail Clip, Oldsmobile All Models Master Cylinders with Equal Reservoirs & Single Bail Clip, GMC All Models Master Cylinders with Equal Reservoirs & Single Bail Clip, Chevrolet All Models Master Cylinders with Equal Reservoirs & Single Bail Clip

CHROME-PLATED SKULL-AND-CROSSBONES MIRRORS Raised and highly-detailed skull and bones are highlighted in black for dramatic contrast Stem is shaped like upper and lower leg and heel bones Custom-styled showroom chrome-plated die-cast metal housing and stem Real eye-catchers! Flat glass mirror surface accurately indicates distance of objects to the rear without distortion. Approximately 3-3/4" diameter x 1"D housing with approximately 5-1/2"L stem. To adjust mirror, simply position the mirror stem and the mirror head and then tighten the knurled lock nut at the top of the stem. For models with 10mm screw-in mirror mounts. Removable screw-in stem mounting bolts plus an extra reverse-thread bolt for use on right-side mirrors on all Yamaha models included. Sold in pairs. Applications: All Makes All Models

MEGA POWER EXHAUST SYSTEM Custom-fit system maximizes flow for the power you need! Japanese Super-N1 design and styling Street legal Mandrel-bent tubing. 102mm polished tip with etched Skunk2 Racing logo. T304 stainless steel construction with low restriction racing muffler. Removable silencer and all necessary hardware included. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1994-2001 Acura Integra RS; LS 2-dr. (inc. 1999-2001 GSR 2-dr.)

NORCOLD? FLUSH-MOUNT REFRIGERATORS Choice of 2-way (LP gas and 120-volt AC) or 3-way (LP gas, 120-volt AC and 12-volt DC) power Work efficiently even when off level Easy-to-clean white interior. Black front trim. Unfinished cabinet. Unfinished door: order black door panels (sold separately) or install your own to match vehicle's interior. Door opens right or left full 180 degrees, allows more aisle space; self-latching, shuts automatically. Low current draw. Installation and operating instructions included. New installation requires exterior roof vent and access panel (sold separately). Made in USA. Shipped separately from factory�cannot be mailed, must be shipped via truck. Applications: All Makes All Models

CUSTOM-FIT ALUMINUM CAM COVERS Lighter & hotter looking than stock covers! Available in your choice of 3 anodized finishes Open-ended cover allows easy access to adjustable cam gears and can be removed if necessary. Machined-flat 3/8" thick billet rail ensures a leak-free seal?special gaskets resist oil, alcohol and race fuel. Easy bolt-on installation. No drilling. Applications:1990-1998 Acura Integra 1.8L; Non-VTEC; Blue with B18A1 or B18B1 Engine Code

ENTRY GUARDS Protect against scuffs and scratches or hide a damaged sill on older models Tough ABS composite material with matte black finish Can be painted to match color scheme Easy to install without drilling. Sold in pairs. Applications:1976-1986 Jeep CJ7,1987-1995 Jeep Wrangler YJ,1976-1986 Jeep CJ7,1987-1995 Jeep Wrangler YJ,1976-1986 Jeep CJ7,1987-1995 Jeep Wrangler YJ,1976-1986 Jeep CJ7,1987-1995 Jeep Wrangler YJ

MUFFLERS AND EXHAUST COMPONENTS Save 20% on Selected Items! For Volkswagens Easy to install�no alterations needed Heavy-gauge steel withstands extreme vibration and road shock Custom made and engineered to exact factory standards. Special louver design breaks up noisy sound waves, resulting in a super-silent muffler with lowest back pressure. Inlet and outlet pipes are included as part of muffler, ensuring permanent rigid suspension and high-quality long-lasting performance. Location of the heat riser tube may be different on replacement muffler; this will not affect the installation or operation of the muffler and heat riser system. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1960-1974 Volkswagen Karmann Ghia Type I (exc. 1974 California) (2 required),1960-1974 Volkswagen Super Beetle Type I (exc. 1974 California) (2 required),1960-1974 Volkswagen Beetle - Air Cooled Type I (exc. 1974 California) (2 required)

PACK RACK� GUN AND BOW RACKS Hold your gun, bow or a wide range of different items securely on your ATV while off-roading The original ATV gun and bow rack! Machined aluminum blocks attach to any tubular handlebar or cargo rack rails up to 1" diameter�also mount on square rails Soft rubber-coated steel forks safely grip different-sized items (guns, bows, etc.)�simply twist the fork and lock the wing nut. Headed for rough terrain? Use the rubber snubbers (straps) included for added protection (replacement rubber snubbers sold separately). Sold in pairs. Applications: All Makes All Models

MOLDED FENDER GUARDS Guards cover and protect fenders from flying rocks, bugs and debris Easy to install?no drilling required Made of heavy-duty, break-resistant acrylic to withstand a lot of hard riding Dark smoke tint. Won't rust or flake. Will not fit Renegade. Sold in pairs. Applications:1987-1995 Jeep Wrangler Sub Model: (exc. Renegade),1987-1995 Jeep Wrangler Sub Model: (exc. Renegade)

STREET PERFORMANCE ALUMINUM INTAKE MANIFOLDS High-velocity runners distribute air into engine to maximize power and efficiency Dyno tested to increase horsepower up to 17%! Outstanding power from idle to 5500 RPM (1500-6500 RPM for high-performance and Power+Plus Crosswind� manifolds) Great lookers, great performers plus they're easy to install and offer multiple performance-building options. Limited one-year warranty. Click on product SKU below for more detailed information. Applications: All Makes All Models for '57-95 Chevy/GMC Small-block Vortec V8 (L31 non-EGR) Cast-iron Head or Edlebrock E-Tec Aluminum Head

WATER HEATERS For RVs Compact aluminum tanks are fiberglass insulated to minimize heat loss Pilot light helps maintain water temperature for fuel efficiency Limited 2-year warranty. Lightweight heaters: 6-gallon heaters weigh 20 lbs. empty, 69-1/2 lbs. full; 10-gallon heaters weigh 24 lbs. empty, 107 lbs. full. Gas lines are connected in a sealed combustion area that is vented outside. Combination units can be heated by LP gas, 120-volt AC or both (increases recovery rate by 50%). Access door and instructions included. Applications: All Makes All Models

REAR ANTI-SWAY BARS 4140 alloy spring steel, heat formed and treated for maximum strength Optimum road feel and increased handling control on corners, uneven road surfaces, in cross winds and quick lane changes. Bolt-on installation�no drilling required. Includes hardware, special polyurethane bushings, instructions. Due to special shipping requirements, cannot ship UPS Next or 2nd Day. Applications:1980-1999 Dodge Van - Full Size 1/2- & 3/4-ton

ADJUSTABLE WRAPAROUND LEG APPAREL Designed to conform to your legs' contours�easily adjustable using the hook/loop fasteners Slip on and off quickly for protection from cold, wet weather Staying comfortably warm and dry has never been this easy! Custom-designed and tailored water-resistant leg apparel is made of lightweight custom-quilted 200-denier black nylon with extra-warm 10-1/2 oz. polyester fill insulation. Great for a cool, early morning ride that lasts until the sunny, warm afternoon. Can be worn over your regular pants or with shorts. Fold up compactly and store almost anywhere. Machine washable. Sold in pairs. Applications: All Makes All Models 34" Inseam; 24" to 34" Thigh; 14" to 24" Calf

N1 MUFFLERS Universal fit! Stainless steel construction uses both robotic and hand-crafted welding Looks awesome on the street or in the show! Premium-polished mufflers feature a straight through design for maximum power. Universal fit means you choose the tip angle. Naturally aspirated muffler features a 60mm inlet and 90mm tip. Turbocharged muffler features an 80mm inlet with 115mm tip. Hardware and instructions included. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: All Makes All Models

LED LIGHT BOLTS Add a bright LED glow anywhere! Replace existing license plate screws for take-notice points of color Screw them in, hook them up and light them up! LED is located on the end of 1" screw. Washers included. Wire easily into 12-volt system?leads included. Sold in pairs. Applications: All Makes All Models

REPLACEMENT VENT COVERS Replace old or damaged vent cover, seal out rain, drafts. OE plastic covers are same as original. Includes heavy-duty hardware. Fit 14" x 14" vents. To order: check hinge on existing vent cover and refer to diagram at left to select Jensen, Elixir or Ventline. Applications: All Makes All Models

RACING NUMBER Big die-cut gray vinyl racing number on clear vinyl Support your favorite race-car driver! Easy peel-n-stick application on window or painted surface Approximately 10-1/4" x 6-1/4". Applications: All Makes All Models

SLIDING WINDOW For windowless vans and RVs Built-in drain channels prevent water from coming inside vehicle Dark gray-tinted safety glass reduces glare Screen lets fresh air in and keeps bugs out. Slides horizontally. Positive action lock provides security. Satin black aluminum outer frame and inside garnish are 2-1/4"D. Sealing material, hardware and instructions included. Applications: All Makes All Models 33"W x 17-1/4", All Makes All Models 33"W x 17-1/4", All Makes All Models 33"W x 17-1/4"

BUNGEE CARGO NETS S-t-r-e-t-c-h-a-b-l-e for ATVs and cycles An ideal way to secure helmets or odd-shaped loads Approx. 15" x 15" nylon-covered elastic cord net stretches to approximately twice its original length and size. 6 plastic-coated steel hooks prevent scratching. Applications: All Makes All Models

RACK UTILITY BOXES Textured black high-impact polyethylene for years of reliable service Install easily on almost any rack Boxes stay secure with industrial-strength bungee cords (included) No need for brackets or tools! Optional lid (sold separately) keeps stored gear clean and dry. Applications: All Makes All Models, All Makes All Models

PERFORMANCE CAMBER KIT Your best solution to camber problems! One handy kit includes everything needed to correct camber on all 4 corners of your car along with some wheel-clearance problems Kit includes front and rear control arms with ball joints and clearance arms (where required; excluding Volkswagen kit). Kit for Volkswagen applications includes bolts. Applications:1990-2001 Acura Integra,1992-1995 Honda Civic

MOLDED SPONGE RUBBER WEATHERSTRIPPING For car and truck doors, trunks and windows Replaces worn, deteriorated originals Stops leaks and drafts High-quality automotive grade rubber. To receive a weatherstrip sample, call (877) 927-7427. Applications: All Makes All Models

EXPANDABLE SISSY-BAR PACK/DUFFEL BAG SET A secure, convenient and easy-on/off way to add extra storage space and protect personal gear 3-piece set includes a black leather sissy-bar pack, a matching detachable duffel bag plus a black nylon rain cover�all at a super-low price! Pack and bag are made of black-dyed heavy-duty cowhide leather for looks and long life Black cotton lining in pack and bag help protect stored gear. All zippers are rust-resistant, self-healing black nylon. All black nylon web mounting straps are adjustable and include quick-press-release black plastic buckles. SISSY-BAR PACK. Approximately 15"W x 20"H x 6"D, but expands to 11-1/2"D by unzipping the 4-sided wraparound zipper. Large zippered 3-sided wraparound top opening ensures easy access to contents. 4 sewn-on side compartments (each approximately 5"W x 6"H x 1-1/2"D) have wraparound zippered top opening. 1-1/2"W carrying straps are sewn to both top and side compartments. Pack mounts to sissy bars and "sits" on either passenger section of seat or on a luggage rack in a fixed position. Secures with 3 sewn-on 1"W buckled mounting straps. 2 more sewn-on 1-1/2"W straps wrap around the sides of the sissy bar and then buckle onto the pack for added security. These straps double as shoulder straps when pack is used as a backpack. DUFFEL BAG. Approximately 13-3/4"L x 9-1/2" diameter. Large 3-sided wraparound zippered top opening. For extra storage, attach to duffel bag to the top of the sissy bar pack using the buckled 1-1/2"W straps. Sewn-on strap loops help prevent duffel bag from shifting around. RAIN COVER. Water-resistant black nylon rain cover fits over both pack and duffel bag. Secures with locking drawstring closure. Folds flat and stores neatly in a side compartment. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

TAILGATE HANDLES Restore tailgate function and improve vehicle's looks Easy bolt-on installation using existing original hardware Applications:1980-1986 Nissan Pickup 720

CHROME-PLATED OIL PANS Customize and dress-up your V8! Designed to stock factory dimensions to prevent clearance problems in cars or street rods Chromed drain plug included. Will not fit trucks, vans or Vega/Monza, Chevelle/Malibu with steering linkage behind cross member. Applications:1987 Ford Crown Victoria 351 Windsor (front sump),1978-1987 Mercury Grand Marquis 351 Windsor (front sump),1969-1986 Ford LTD 351 Windsor (front sump),1985 Mercury Colony Park 351 Windsor (front sump),1978-1982 Mercury Marquis 351 Windsor (front sump),1981 Mercury Colony Park 351 Windsor (front sump),1980 Lincoln Mark VI 351 Windsor (front sump),1980 Lincoln Continental 351 Windsor (front sump),1977-1980 Ford Thunderbird 351 Windsor (front sump),1977-1980 Ford LTD II 351 Windsor (front sump),1969-1980 Ford Ranchero 351 Windsor (front sump),1969-1980 Mercury Cougar 351 Windsor (front sump),1979 Mercury Colony Park 351 Windsor (front sump),1977 Lincoln Versailles 351 Windsor (front sump),1976-1977 Ford Country Squire 351 Windsor (front sump),1976-1977 Ford Ranch Wagon 351 Windsor (front sump),1975-1977 Ford Granada 351 Windsor (front sump),1975-1977 Mercury Monarch 351 Windsor (front sump),1972-1976 Ford Gran Torino 351 Windsor (front sump),1969-1976 Ford Torino 351 Windsor (front sump),1969-1976 Mercury Montego 351 Windsor (front sump),1969-1975 Ford Galaxie 351 Windsor (front sump),1969-1974 Ford Ranch Wagon 351 Windsor (front sump),1969-1974 Ford Mustang 351 Windsor (front sump),1969-1974 Ford Country Squire 351 Windsor (front sump),1969-1974 Ford Country Sedan 351 Windsor (front sump),1971-1973 Mercury Monterey 351 Windsor (front sump),1971-1973 Mercury Marquis 351 Windsor (front sump),1971-1973 Mercury Colony Park 351 Windsor (front sump),1969-1971 Mercury Cyclone 351 Windsor (front sump),1970 Ford Falcon 351 Windsor (front sump),1969-1970 Ford Fairlane 351 Windsor (front sump),1969 Mercury Comet 351 Windsor (front sump)

RAZR TUBELESS TIRES Heavy-duty construction for superior puncture resistance with light weight Racing compound ensures advanced traction and extended tire life Race proven in the Grand National Cross Country race series For off-road use only. Applications: All Makes All Models

© StoreDaily.com inc. Copyright 2008. All rights reserved. Blog