Nitrous NX Express N-tercooler @ Auto Parts & Accessories online store

Nitrous NX Express N-tercooler

N-TERCOOLER Boosts HP on supercharged or turbocharged cars where a conventional nitrous system is not an option! Uses either nitrous or CO2 to dramatically reduce air inlet temperatures More power for your supercharged or turbocharged car! Dyno tests prove that a turbocharged Honda equipped with this unit increased its baseline by an astounding 52 HP! Just imagine what it will do for you! Easy bolt-on installation?mounts directly to the intercooler. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: All Makes All Models, All Makes All Models

ELECTRONIC DIGITAL COMPASS Incorporates patented magnetic sensor technology, designed for the U.S. military and used in GM, Ford and Chrysler vehicles! Distortion detector warns when outside magnetic interference is impairing compass accuracy Automatic shut-off when vehicle is parked/stopped for 10 minutes Easy, one-step electronic calibration?no manual adjustments required. Declination correction lets you set compass to true or magnetic north. Advanced holographic LCD makes readings easier?improves brightness and contrast, removes glare. Electroluminescent backlighting with automatic on/off sensor and programmable shut-off. Bearing mode lets you store one bearing point in memory. Compass mounts on windshield with suction cups or the adjustable bracket (included). 3-7/8"W x 2-1/2"H x 2"D without bracket but has a large, easy-to-read screen. Operates on long-life lithium battery (included) or plugs into 12-volt cigarette lighter socket (adapter jack included). Metallic finish. Instructions included. Limited one-year warranty. THE COMPLETE INFORMATION CENTER FOR YOUR VEHICLE! COMPASS. Indicates direction 3 ways: compass rose (display pointer), 8 cardinal points (N, NE, S, etc.) and digital numbers (5? increments). INDOOR/OUTDOOR THERMOMETER. Measures temperature in F? and C?. ALTIMETER. Indicates elevation up to 19,990 feet (6,000 meters). BAROMETER. Measures barometer pressure and up/down trends to foretell weather patterns. ICE ALERT. Warns at 35? F (1? C) of dangerous freezing conditions and potential black ice. Applications: All Makes All Models, All Makes All Models, All Makes All Models

LEATHER MOTORCYCLE BOOTS FOR MEN Tough Goodyear? welted construction and 2.2mm thick full-grain black leather uppers with heavy-duty stitching throughout Boots can be resoled and reheeled for years of dependable wear Custom-sized full-cushion insoles add to the overall comfort and great fit?they're removable and machine washable Heavy-duty, oil-resistant rubber soles are nonskid, nonslip and nonmarking. Zipper openings for effortless on/off. Freedom Flex? Construction (described below), leather texturing, stitching and classic hardware. Boots are available only in the sizes listed and in medium width. Sold in pairs. How to order: Check the size inside a current and comfortable pair of shoes or boots and order the same size. Click on item SKU# for additional information. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Freedom Flex? for Instant Comfort! Freedom Flex? Construction ensures freedom of movement and walking comfort right out of the box! No stiff, uncomfortable break-in period needed. It's like combining the ease of a leisure shoe with the look and toughness of a biker boot. Applications: All Makes All Models

SIDE STEPS Go great with factory original flares or match fender flares sold separately Provide a sturdy surface for safe, nonslip footing Applications:1997-2004 Jeep Wrangler (exc. Sahara),1997-2004 Jeep Wrangler (exc. Sahara),1997-2004 Jeep Wrangler (exc. Sahara),1997-2004 Jeep Wrangler (exc. Sahara)

KC HiLITES� ORIGINAL LIGHT COVERS The best way to protect your lights while off-roading! Available in different sizes, colors and graphics Let everyone know you've got the best! Applications: All Makes All Models white with red script letters, All Makes All Models white with red script letters

FOLDING CURVED LOADING RAMPS Patented camber design allows tractors, cycles and ATVs to maneuver easily over the tailgate Curved design also keeps wheels in contact with ramp surface at all times to eliminate back-wheel spin Available in steel or aluminum Solid surface is safe to walk on. There are no rungs to "catch" tires, possibly causing tractor to flip backwards. Ramps are 84" long opened and have a 12-1/4" wide raised no-skid loading surface. Approx. 7" long steel fingers secure ramps to tailgate. Stretch straps and drop-in holding-down pins are included to maximize ramp stability, prevent accidental separation and allow easy repositioning. Ramps fold down to 63-1/2" x 12-1/4" x 4" size for compact storage. Some assembly required. Include instructions. Steel Ramps. 2,000-lb. capacity per pair. Black powder-coated 14-gauge steel. Approx. 83 lbs. per pair. Aluminum Ramps. 1,500-lb. capacity per pair. 12-gauge aluminum. Approx. 55 lbs. per pair. Applications: All Makes All Models

RADIO WIRING HARNESS Lets you add a universal radio to any system with up to 4 speakers almost effortlessly! Plug your new radio directly into factory-installed wiring harness Avoids having to "cut" the factory connectors Color coded with chart for easy identification of each wire's function. Some vehicles with factory amplifiers will require an additional factory amplifier interface. Applications:1993-1994 Lincoln Mark VIII,1990-1994 Lincoln Town Car,1990-1993 Lincoln LS,1988-1993 Lincoln Continental,1990-1992 Lincoln Mark VII,1993-1994 Lincoln Mark VIII,1990-1994 Lincoln Town Car,1990-1993 Lincoln LS,1988-1993 Lincoln Continental,1990-1992 Lincoln Mark VII

9006 HALOGEN BULBS For high-powered illumination Quality made to industry standards For uniform brightness and optimum performance, we recommend replacing your bulbs in pairs For off-road use only except (A) which meet DOT requirements. Bulb Care: Do not handle the glass part of a halogen bulb. The oil from your hands or any other residue on the glass can cause the bulb to burn out prematurely. If you accidentally touch the glass, clean it immediately with isopropyl alcohol and a lint-free cloth. Applications: All Makes All Models

HOOD-WIDTH BUG DEFLECTOR Extra-thick smoke-tinted Composilite� polymer is super tough, super scratch resistant High-profile hood-width design Contoured to match your truck's lines Out most affordable bug deflector�and you won't find it anywhere else! Made only for JC Whitney�your guarantee of top quality, top styling and unbeatable low price! Applications:1984-1988 Toyota 4Runner,1984-1988 Toyota Pickup

SILICONE WIPER BLADES Includes THREE different color blades?red, yellow and blue! Outlast, outperform original-equipment rubber blades...look better, too Available in 16" to 24" length in 1" increments Heavy-duty silicone blade wipes clean and remains flexible year after year. Easy to install. Applications: All Makes All Models

ROOF VENT COVERS Choose standard vent cover or Turbo/Maxx� with high-volume fan Brighten up interior, keep out rain without interfering with vent operation. Both sold with warranties. Applications: All Makes All Models

"BB" ONE-PIECE TRAILER LIGHT CONNECTORS AND ADAPTERS Connectors hook up trailer light wires to towing vehicle faster and easier than ever! Adapters link connectors to 6- or 7-way round trailer light connector Plug into factory taillight connector. Standard 4-terminal connector plugs into trailer wiring. No wires to splice. Look factory installed. Weatherproof, long-life plastic housing. (A) Connector includes built-in taillight converter. (B) Connector includes built-in power taillight converter. Applications:1995-2004 Toyota Tacoma

POWERFUL 55-WATT QUARTZ-HALOGEN DRIVING LIGHT KIT WITH LIGHT BAR Custom-fit and chrome-plated kit adds more sparkle to cruiser plus exceptionally bright, long-range illumination Chrome-plated light visors sold separately For '85-2004 Honda, Kawasaki and Suzuki cruisers No drilling�easy bolt-on installation. Complete with everything needed for extra "seeing" power and a factory-look installation. Kit includes 2 chrome-plated driving lights; chrome-plated round tubular steel light bar; pre-assembled, color-coded wiring harness; illuminated red rocker switch. Applications: Suzuki Marauder, Kawasaki Vulcan, Honda Spirit, Honda Shadow Models

REPAIR AND SERVICE MANUALS Save money by doing repairs yourself! Contain complete facts on maintenance, tuning, troubleshooting and more plus wiring diagrams, specs and illustrations For motorcycles, ATCs, ATVs and mopeds Applications: All Makes All Models

DRILLED AND SLOTTED PERFORMANCE BRAKE ROTORS Maximum air circulation for increased cooling and reduced fade Precision drilled and chamfered for faster initial braking Slots help keep rotor surface free of pad residue and contaminants for less dusting and longer rotor life. Dramatically improve wet-weather braking. Strong one-piece design maximizes structural integrity to meet the demands of off-road driving performance. Applications:1981-1985 Toyota Pickup 4WD

DODGE CARPET MATS Protect your truck's carpeting while standing up to years of use Heavy-duty rubberized vinyl with colorful Dodge Ram logo Logo won't wash, wear or peel off Anti-skid backing keeps mats in place. Easy cleanups. Applications: Dodge All Models

UNIVERSAL AND HEAVY-DUTY CYCLE DRIVE CHAINS Pre-stretched to minimize initial stretch Choose universal or heavy-duty (refer to chart at left for how to measure replacement chain) Solid roller-drive chains with strong-heat treated, shot-peened components Include the master link and require breaking for a custom fit (chain breaker not included). Order by chain size (usually found on master link) and number of links. How To Determine Number of Chain Links: There's an easy way to find out using any of the 3 methods below. For greatest accuracy, it's best to start counting at the master connecting link. Marking that link will prevent double counting. Remember, the number of links will always be an even number. Count all rollers. The number of rollers equals number of links. Count all pins on one side of chain. The number of pins equals number of links. Starting with the master connecting link (counted as "1"), count all outer side plates on one side of chain. Double that number equals the number of links (e.g., 48 outer side plates equals 96 chain links). Applications: All Makes All Models, All Makes All Models

AIR TOOL HOSE Oil and chemical-resistant nylon Each end has 360� swivel 1/4" NPT brass male fitting and spring guard to prevent airflow restriction Stretches up to 25 ft. and then snaps back into position without tangling 200 psi capacity. 1/4"ID Applications: All Makes All Models

REPLACEMENT FENDER For pickups and SUVs Restores original look and integrity Easy, do-it-yourself, bolt-on installation using original mounting hardware Shaped and contoured to replace original perfectly! Eliminates rusted, dented or cracked part easily. Die-formed steel with all correct body lines, light holes, cutouts, mounting holes, etc. Primer-painted to fight rust. Some surface prep required before painting. Cannot be shipped express. Not mailable. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. NOTE: SKU numbers ending in FE are factory shipped by freight truck. Applications:1979-1983 Toyota Pickup 2WD

REPLACEMENT FUEL LINE HOSES Tough�withstand harsh under-hood conditions. Order hose for carbureted or fuel-injected systems: different sizes. Applications: All Makes All Models

CAL-LOOK FENDERS Die-formed, stamped, heavy-gauge primered steel contoured like originals to fit perfectly. Bolt on in place of originals. Easy�no turn signal holes at top to fill in. Applications:1968-1978 Volkswagen Beetle - Air Cooled

ELECTRONIC TACHOMETERS For 4-, 6- or 8-cylinder engines with most factory and aftermarket ignitions Bright amber shift-lite signals your preselected RPM for quick-response shifting! Race-car-look mounted design for top of dash, steering column or roll cage 10,000 rpm "dial-in-exactness" allows you to achieve maximum horsepower by setting the fluorescent red pointer to your engine's peak RPM. Once dialed-in, the amber light signals your critical shifting moment. Advanced air-core meter movement provides superior accuracy and response. Exclusive rubber-lined shock strap protects against severe vibrations. 12-volt lighting and mounting hardware included. 5" monster face. Not designed to be exact original replacement gauges. Approximately 5-3/4"H x 4"D. Applications: All Makes All Models

CHROME-PLATED WATER NECK Includes chromed bolts For '55-87 V8 engines Applications:1964-1981 Pontiac Bonneville V8,1964-1981 Pontiac Catalina V8,1964-1981 Pontiac Star Chief V8,1964-1981 Pontiac Tempest V8,1964-1981 Pontiac Safari V8,1964-1981 Pontiac GTO V8,1964-1981 Pontiac Executive V8,1964-1981 Pontiac Grandville V8,1964-1981 Pontiac Ventura V8,1964-1981 Pontiac Grand Safari V8,1964-1981 Pontiac Sunbird V8,1964-1981 Pontiac Phoenix V8,1964-1981 Pontiac Grand Am V8,1964-1981 Pontiac Parisienne V8,1964-1981 Pontiac LeMans V8,1964-1981 Pontiac Grand Prix V8,1964-1981 Pontiac Grand LeMans V8,1964-1981 Pontiac Firebird V8

REPLACEMENT REAR-VIEW FAIRING MIRRORS Save 60% on Select Items! Duplicate original fairing-mounted mirrors Replace original mirrors (mount in same location, use existing hardware and require no drilling). Also can be mounted on any sport-style fairing (use of existing hardware and drilling of fairing required). High-impact plastic housings and stems. Convex mirror surface. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1993-1994 Suzuki GSX Models R1100,1991-1995 Suzuki GSX Models R750,1992-1993 Suzuki GSX Models R600

MAIN BEARING SET Save up to 70% on Selected Items! Perfectly matched set�complete for each make and model of engine Made to SAE specifications For American cars and trucks Available in standard or oversizes. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1973-1975 Mercury All Models (April 1975) with 6-cylinder 200 (full-groove 7 mains),1973-1975 Ford All Models (April 1975) with 6-cylinder 200 (full-groove 7 mains),1965-1972 Mercury All Models with 6-cylinder 200 engines (with 7 main bearings),1965-1972 Ford All Models with 6-cylinder 200 engines (with 7 main bearings)

THROTTLE CABLE KIT Eliminates chafing and broken stock throttle cable For all Type I Beetles, Karmann Ghias, Baja Bugs and Dune Buggies Kit includes strong aircraft cable (protected by nylon cable guide) with swaged-end and hardware. Easy to install. Cable: 3/32" diam. x 11'L. Applications: All Makes All Models

HEADLIGHT STROBE LIGHTS Emit a bright pulsating light within composite headlight housing or lighting assembly Designed for show use only Includes two 1-1/2" xenon bulbs, transformer, hardware and instructions. Order control module (sold separately) to control speed and effect of flashes. Installation requires drilling 1/2" diam. hole in each light housing. For 12-volt negative-ground systems. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

BLUE STREAK SERPENTINE BELT Blue�looks great under the hood! Direct replacement for OEM serpentine belt Quieter and less stretch than standard belt Applications:1992-1995 Honda Civic 1.5L with AC,1988-1991 Honda Civic 1.5L,1997-1998 Acura Integra 1.8L VTEC,1992-1996 Acura Integra 1.8L,1992-1995 Honda Civic 1.5L with AC,1988-1991 Honda Civic 1.5L,1997-1998 Acura Integra 1.8L VTEC,1992-1996 Acura Integra 1.8L

BRIGHT ALUMINUM EXTRA-LARGE STEPS Much bigger than conventional steps for easier access to truck Bright-finish, corrosion-resistant aluminum alloy�rugged, looks terrific Molded-in aluma-tread pattern on step surface ensures safer, no-slip footing Easy to install. Some drilling required. All necessary brackets, hardware and instructions included. Sold in pairs. Click on item SKU# for additional information. Applications:2000-2003 Chevrolet Suburban,2000-2003 Chevrolet Tahoe,1997-2003 Ford Expedition,1997-2003 Ford F-Series Pickup Sub Model: Light Duty; NUMBER OF DOORS: 2-dr.,2002-2003 GMC Envoy,1999-2003 GMC Sierra Sub Model: Heavy Duty,2000-2003 GMC Suburban,2000-2003 GMC Yukon Sub Model: (inc. Yukon XL)

SPLIT REAR CAT-BACK EXHAUST SYSTEM 50-state legal system easily converts side-exit exhaust to dual split rear exit for a totally hot look! 2-1/2� outside diameter aluminized tubing and aluminized performance muffler Stainless steel exhaust tips available (sold separately) Aluminized heavy-duty 16-gauge steel resists rust and provides years of dependable service. Fits pickups with most spare tires, roll pans, trailer hitches and up to 4" drop without modification. Precision-fabricated 2-1/2"OD mandrel-bent tubing ensures a smooth exhaust flow, eliminating the power-robbing turbulence associated with press-bent stock exhausts. Features include 2 tailpipes, 2 angle-cut exhaust ends and split rear exit. Kit includes all exhaust pipes from the converter back, a fully-welded aluminized performance muffler, hangers, clamps, hardware and instructions. Installs with hand tools�no welding required. May require cutting connector pipe on short wheelbase. Applications:1988-1993 Chevrolet C/K Pickup Extended Cab; 6-1/2' Bed; 350 5.7L Engine,1988-1993 GMC C/K Pickup Extended Cab; 6-1/2' Bed; 350 5.7L Engine

CARPET FLOOR MATS AND CARGO LINERS Complete custom-fit protection for your entire floor�front to back! OE-quality nylon cut-pile carpeting for exception long wear Deep-dish design, moisture barrier and molded outer edge "catch all" messy elements and prevent them from soiling your carpet Pressure-molded backing ensures mats conform to the shape/contours of your vehicle exactly. Top-of-the-line mats will stand up to years of tough abuse. Electronically-welded heel pad adds durability. Patented snap-fastener system for a snug, no-slip fit�slip in easily and stay put. Easy cleanups! Scotchgard� treated for maximum stain resistance! To clean, simply remove, hose off and air dry. Color-coordinated edge binding prevents unraveling. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (800) 529-4486 and request the color(s) you would like. Applications:1996-2002 Jeep Grand Cherokee,1987-1995 Jeep Wrangler YJ,1996-2002 Jeep Wagoneer TJ,1996-2002 Jeep Grand Cherokee,1987-1995 Jeep Wrangler YJ,1996-2002 Jeep Wagoneer TJ

3" OR 4" DRILL PRESS VISES Cast iron base, hardened steel jaws Chrome-plated cold-rolled steel screw for smooth action Heavy-duty vises bolt to drill press table, workbench�almost anywhere! Slotted base for easiest positioning. Chrome-plated crank handle swivels out of the way when not needed. Bolts not included. 3" Vise. 3"W jaws open to 3". Approx. 5-1/4" x 5-3/4" overall. 4" Vise. 4"W jaws open to 4-1/16". Approx. 7-1/2" x 6-1/2" overall. Applications: All Makes All Models

PERFORMANCE INTAKE SYSTEM Improves airflow up to 20% over stock High-flow reusable 5-layer cotton/stainless steel mesh filter for superior filtration Up to 18 horsepower gains without any other modifications! Mandrel-bent large-diameter tubing is powder coated inside and out. Easy to install with ordinary hand tools. Applications:1996-2004 Chevrolet S10 Pickup 4.3L,1996-2004 GMC S-15 Pickup 4.3L,1996-2004 GMC S-15 Jimmy 4.3L,1996-2004 Chevrolet S10 Blazer 4.3L,1996-2001 GMC Sonoma 4.3L,1996-2004 Chevrolet S10 Pickup 4.3L,1996-2004 GMC S-15 Pickup 4.3L,1996-2004 GMC S-15 Jimmy 4.3L,1996-2004 Chevrolet S10 Blazer 4.3L,1996-2001 GMC Sonoma 4.3L

TRUCK TOOLS� CONTRACTOR'S RACK Unique design�completely adjustable to fit long and short bed trucks Rear crossbar is removable to accommodate tall loads Supports loads up to 800 lbs. Built for versatility and strength! Strong round steel tubing with tough black powder-coated finish. Temporary-mount system allows quick, easy installation without drilling or cutting and fast removal for complete access to bed. Permanent-mount system allows use of your crossover tool box�some drilling required. All joints are swaged for a tight, strong fit. Uprights and crossbars are gusseted for maximum strength. Center crossbar is fully adjustable to handle any large or small load and ensure proper weight distribution. Remove the quick-release rear crossmember when you want to haul tall equipment (refrigerator, high dresser, etc.). Sturdy openings on each upright provide sturdy tie-down points (tie-downs, straps or ropes not included; sold separately). Built-in rear grab handles help when loading/unloading ladders, supplies, etc. Assembly required. Instructions and gold/zinc-plated hardware included. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: All Makes All Models

SAILCLOTH REPLACE-A-TOP� Multi-layer design for more insulation and noise reduction Heavier than previous factory top fabrics�shows fewer wrinkles and cleans easier than ever before! Fabric resists temperature-caused shrinkage, making it easier to install in cool weather 2-year warranty Dramatically reduces interior sound levels as you drive so you can talk without yelling! Uses factory-original frames with bows. No extra hardware or drilling required for installation. Mounts to factory-original hardware. NOTE: Replace-a-Top� will not fit '88-95 Wranglers with full steel hard doors. HOW TO DETERMINE IF YOUR '88-95 WRANGLER HAS FACTORY-ORIGINAL HARDWARE. Five sliding snaps on drip rail at the top of the doors (not unusual for one or 2 to be missing). Also, spreader bars between front and rear bow assembly. Applications:1997-1998 Jeep Wrangler with Tinted Windows,1997-1998 Jeep Wrangler with Tinted Windows,1997-1998 Jeep Wrangler with Tinted Windows

SUPERCHARGER SYSTEM The ultimate in power improvement, performance and reliability�the result of Jackson Racing's engineering and the Eaton supercharger Increases power, acceleration and throttle response by 40%! Gains of up to 80 HP and 60 ft./lbs. of torque! Instant power from off-idle to maximum RPM without spiking or hesitation! Maximizes horsepower and torque at every RPM point (1,000 to 8,000) without sacrificing reliability, drivability or emissions. System is built to OE factory standards using the highest-quality materials and components throughout. It's designed with everything to put your car on the cutting edge of technology. Exclusive vacuum bypass system remains closed when you need power. When you're just cruising, the bypass opens to reduce engine load. You experience smooth transitions with no lag! More innovations: supercharger is hung off engine where it will receive huge airflow to maximize efficiency; supercharge is close to intake valves, ensuring the response time to throttle input is instantaneous; relocating throttle body upstream of supercharger (a Jackson Racing exclusive) makes on/off throttle response more reactive; dedicated fuel management system perfectly matches the needs of your engine under boost. Complete. Includes new cast aluminum intake manifold, premium-quality casting(s), powder-coated billet aluminum brackets, high-grade silicon hoses and gaskets, quality fasteners and stainless steel clamps. All components are made for maintenance-free performance and long service life. Manufacturer's 2-year/100,000-mile warranty. Installation time: 6 to 8 yours. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. THE EATON SUPERCHARGER�THE HEART OF THE JACKSON RACING SYSTEM! The Eaton supercharger is the most advanced supercharger available! It's the same brand used in the Mercedes SLK, Jaguar XJR and more. It has the highest efficiency rating in the industry along with the quietest operations and longest life. Unlike a turbocharger, the Eaton supercharger won't contribute to under-hood heat, increasing intake charge air only 74� F. This ensures efficiency and eliminates the need to add the expense or complications of a flow-through inter-cooler and the loss of boost that goes with it. Applications:2001-2003 Mazda Miata Engine Size: 1.8L Engine ; Air Conditioning: with Air Conditioning; Power Steering: With Out Power Steering

SUPER HI-MILER? HIGH-PERFORMANCE BLUE HOSE KIT Withstands higher engine temperatures making this kit far superior to standard EPDM hoses Comparable to much more expensive silicone hoses Kit comes complete with all radiator and heater hoses High-speed travel, high outside temperature and continuous idling can cause engine temperatures to rise above 325?, placing excessive stress on your vehicle's coolant hoses. This kit will help you stay cool. Hose consists of a super high-temperature black EPDM tube, DuPont Nomex reinforcement and super-high-temperature blue EPDM cover. The EPDM tube resists cracking, retains its flexibility and minimizes cold-weather leaks. The Nomex reinforcement ensures greatest flexibility and burst strength. The blue EPDM covers are instantly identifiable, withstanding high engine and ambient heat, resisting cuts and abrasions?and they don't need special clamps like silicone hoses. Applications:1990-1994 Ford Ranger 4.0L

SLAM AIR AIR ADJUSTABLE SPRINGS Towing and hauling with a lowered truck doesn't have to result in a bad ride Springs adapt lowered truck's rear leaf suspension system to provide an adjustable spring rate for ride comfort and variable load requirements Designed specifically for lowered trucks with 2" to 6" drop, including trucks with flipped axles and notched frames. Easy to install. Brackets included to fit Bell Tech� C-sections plus hardware and detailed instructions. Use service station air hose to inflate springs or order an on-board air supply system (sold separately). Never exceed manufacturer's recommended gross vehicle rating. Sold in pairs. Applications:1973-2001 Chevrolet C/K Pickup C10 and C1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1987-2001 Dodge Dakota 2WD,1970-2001 Ford F-Series Pickup F150 2WD,1973-2001 GMC C/K Pickup 1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1969-2001 Dodge Pickup - Full Size D100; D150; and Ram 1500 2WD,1982-1998 Ford Ranger 2WD,1973-2001 Chevrolet C/K Pickup C10 and C1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1987-2001 Dodge Dakota 2WD,1970-2001 Ford F-Series Pickup F150 2WD,1973-2001 GMC C/K Pickup 1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1969-2001 Dodge Pickup - Full Size D100; D150; and Ram 1500 2WD,1982-1998 Ford Ranger 2WD

REPLACEMENT BUMPER Restores original look and structural integrity Replaces original perfectly�shaped and contoured like original New�not a rechromed or repaired bumper. Available with or without holes for impact strips/pads and end caps (strips and end caps not included). Heavy-gauge steel stampings (chrome-plated or painted as original). Easy bolt-on installation using original mounting hardware. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight. Applications:1986.5-1992 Nissan Pickup

WEIGHT-DISTRIBUTING HITCH Trailer and vehicle remain level for improved stability, better traction and easier steering and braking Includes bolt-on adjustable ball mount Weight transfers to vehicle's frame instead of bumper�vehicle and trailer remain level Gross trailer load capacity up to 10,000 lbs. Tongue weight capacity up to 1,000 lbs. Bolt-on adjustable ball mount, heat-treated steel spring bars. Works in conjunction with Class III (2" x 2") receivers. Durable black finish. Bolt-on ball mount allows 6-1/2" vertical height adjustment. Accepts hitch ball with 1", 1-1/4" or 1-3/8" diameter shank. 10" shank. 28"L heat-treated steel spring bar is tapered to provide a smooth yet firm ride. Snap-up chain bracket for easy hookup to trailer frame�eliminates slippage. Remove quickly for storage. All hardware and instructions included. Coupler ball not included. Limited lifetime warranty. Applications: All Makes All Models

POWER FORCE� POWER INVERTERS MOSFET technology plus true modified sine form provide consistent AC output necessary for sensitive equipment 350-Watt to 6,000-Watt peak output to handle 12-volt DC to 120-volt AC power needs�light duty to industrial Built-in cooling fan (except 175-Watt) Powerful high-output transformer. Internal and external circuit protection. Applications: All Makes All Models, All Makes All Models

PREMIER SERIES ABS RUNNING BOARDS High-impact ABS plastic with full-length steel reinforcement for additional strength Full-length step pad for no-slip footing Custom-fit body-mounting kit for secure, easy installation A custom touch for your truck and easier, safer entry/exit for you and your passengers. Black OE finish�ready to install or easily painted to match truck. Sold in pairs. Applications:2001-2003 Ford F-Series Pickup Sub Model: F150 Super Duty; Fender Flares: with Flares

PREMIUM UPGRADE BULBS Colored glass bulbs for longer-lasting original color than painted-color bulbs Before ordering, check owner's manual or base of bulb for type of bulb needed Applications: All Makes All Models

NEON LIGHTNING ACCENT TUBES A lightning bolt captured in your car1 Long-lasting neon is sealed in a water-proof, high-impact Lexan? tube Flashes adjustable from slow to fast Install anywhere?inside or out. Features built-in transformer that plugs into lighter socket or wires to 12-volt system (only 2 wires to hook up). Include brackets, hardware and instructions. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models

SOLID-STATE ELECTRONIC VOLTAGE REGULATOR Eliminates old-fashioned mechanical point-type voltage regulator Never need to adjust or clean points For American cars and light trucks Replaces original perfectly with no alterations. Low cut-in feature permits alternator output at much lower RPM than with mechanical voltage regulators. Automatically compensates for temperature changes. Handles up to 100-amp alternators. Applications:1961-1969 Chrysler All Models Cars & Light Trucks,1961-1969 Dodge All Models Cars & Light Trucks,1961-1969 Plymouth All Models Cars & Light Trucks

MECHANICAL FUEL PUMP REPLACEMENT KITS Makes it easy to replace your inefficient mechanical fuel pump with an improved electronic pump Limited one-year warranty. Click on item SKU# for additional information. Applications: All Makes All Models

FRONT AXLE COVER AND PLUG Bright custom styling for front axle Chrome plated! CNC machined billet aluminum. Right-side Nut Cover. Conceals axle nut. Includes set screws. Left-side Plug. Snaps in. Includes "O" ring for tight fit. Applications:1997-2004 Honda Valkyrie GL1500; Tour & Interstate,2001-2003 Honda VTX Models 1800,2002-2004 Honda VTX Models VTX1300 Retro,2001-2003 Honda Gold Wing GL1800

FIRE EXTINGUISHER A safety device that's so good looking you'll want to show it off! Rating: A-B-C Effective against most fires Compact one-lb. size and mounting bracket allow easy installation anywhere! UL listed. Refillable. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

TRAILER HITCH BALL ASSEMBLIES AND COVERS Fit standard ball and socket trailer couplers High-grade steel for maximum strength and safety Meet or exceed Federal V-5 standards Applications: All Makes All Models, All Makes All Models

COLOR-CHANGING ACCENT TUBE Installs anywhere�inside or out! Switch lets you select constant single color or gradient color change Long-lasting neon is sealed in a water-proof, high-impact Lexan� tube. Tube features built-in transformer that plugs into lighter socket or wires to 12-volt system (only 2 wires to hook up). Includes brackets, hardware and instructions. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

CHROME-PLATED WRAPAROUND HOOD DEFLECTOR Strong yet flexible ABS plastic survives rough conditions and temperature extremes�absorbs road vibrations without cracking Custom-fit high-style hood, windshield and fender protection! UV stabilized to prevent discoloring and fading Deflector is aerodynamically designed with an upturned contour to direct airflow and full wrap to protect fenders while complementing truck's smooth lines. Stands away from painted hood, so there's no danger of damage and scratches. Easy to install. Depending on application, deflector may not require drilling in OEM holes or using 3M� tape. Limited lifetime warranty. Applications:2001-2002 Ford Ranger (fiberglass hood)

PICKUP CAB SPOILER Take-notice styling plus less drag! Mounts to rear of cab and directs air up and over pickup or camper shell For pickups Blends right into vehicle's lines and contours. Rugged fiberglass construction. Smooth gel-coat finish can be easily painted to match or contrast finish. Easy installation. Some drilling required. Includes hardware and instructions. Applications:1999-2001 Ford F-Series Pickup Super-duty; Ext. Cab only

REPLACEMENT MIRRORS True vision flat glass mirrors in 3 sizes Can also be used on Honda, Kawasaki and Suzuki cycles with 10mm screw-in mirror mounts For '68-82 Honda cycles Adjustable swivel head mirrors with chrome-plated steel stems (10mm threads). Applications:1980-1981 Honda CX Models 500C with 4-7/8" diam. x 1-3/4" deep chrome-plated housing and 7/16" diam. steel stem,1980-1981 Honda CB Models 650C with 4-7/8" diam. x 1-3/4" deep chrome-plated housing and 7/16" diam. steel stem,1982 Honda CB Models 650C with 4-7/8" diam. x 1-3/4" deep chrome-plated housing and 7/16" diam. steel stem,1979 Honda CB Models 750L with 4-7/8" diam. x 1-3/4" deep chrome-plated housing and 7/16" diam. steel stem,1980-1982 Honda CB Models 750C with 4-7/8" diam. x 1-3/4" deep chrome-plated housing and 7/16" diam. steel stem

ALUMINUM LOADING RAMP 1,000-lb. capacity Folds into a compact (approx. 4-1/2" x 12" x 47-1/2") package Designed for easy loading or unloading of cycle, wheelbarrow or other cargo onto pickup bed or trailer. Order 2 ramps for 4-wheel ATV. Ramp is strong, lightweight (approx. 25 lbs.) and easy to handle. Approx. 12"W x 84"L fully extended (without stabilizing fingers) and has 1" x 2" extruded high-alloy structural aluminum side and center rails with strong welded-on 1" x 2" cross members. Cross members are ridged for better traction and reduced slippage. Unique center hinge is reinforced for greater strength and angled upward to help prevent bowing under heavy loads. Approx. 4"L welded-on no-mar stabilizing fingers fit on tailgate. Steel cable (included) secures to bumper to help prevent separation. Latch holds folded ramp closed for trouble-free transport (carry handle included) and storage. Save when you buy a pair of ramps! 2,000-lb. total capacity. Applications: All Makes All Models

DUAL-CONE SPEAKERS Ultra-tough blue polypropylene cones for outstanding, low distortion sound Long-lasting black foam surround Extra-long black stamped metal basket Low-profile ABS grille included (except where noted). Sensitivity: 90-91 dB. 4-Ohm impedance. Sold in pairs. Click on product SKU for additional information. Applications: All Makes All Models

CUSTOM-SCROLLED MIRRORS Mirrors are decorated with graceful scrolls located on the reverse side of the glass surface to prevent damage Chrome-plated custom-designed die-cast metal housing True-vision nonglare mirrors offer accurate view of everything to the rear�no distortion Vibration-stop lock nuts hold mirrors in lace. Sliding mirror head can be adjusted 6" up/down on stem to ensure easiest viewing. Approximately 5-1/8"W x 3-5/8"H housing mounts to 3/8" diameter x 9"L steel stem with set screw�screw and hex wrench included. For Honda, Kawasaki, Suzuki and Yamaha cycles with 10mm screw-in mirror mounts. Sold in pairs. Applications: Yamaha All Models

VENTED SHORTY HELMET WITH STORM CURTAIN Save 20% on Selected Items! Replacement visor and storm curtain sold separately Refer to HELMET SIZING CHART A (see below) Easy to wear, comfortable and secure in a variety of colors Injection-molded outer shell is made of specially modified polycarbonate alloy that absorbs impacts and resists penetration. Contoured-to-fit foam-padded 1-pc. polystyrene inner shell absorbs shocks. Lined with sweat-resistant black brushed perforated microfiber nylon. Outer shell is sanded smooth and coated with top-quality paint. Metallic color is achieved with ultra-fine flakes. Tough, high-gloss clear polyurethane coating protects paint against cuffs/scratches. Easy soap and water cleanups. Flat black helmet has special polyurethane finish to resist fingertips, mars and scuffs. Black forehead vents (white on white helmet). Storm curtain features black leather-like vinyl outer cover and black brushed nylon lining. Great-looking black snap-on bubble sun visor. Black double-stitched nylon open-ear-harness chin strap with chromed steel "D" rings. Black rubber trim. Meets or exceeds DOT specifications. Solid colors and 2-tone police-style (listed bottom/top) available. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models

FABRIC ACCESSORIES Caps, curtains and covers made of 6-oz. polycotton fabric with denim-style texture Protection and coverage your Wrangler deserves at an affordable price! Mounting instructions included. Applications:1997-2002 Jeep Wrangler with Fabric Soft Top Removed,1997-2002 Jeep Wrangler with Fabric Soft Top Removed,1997-2002 Jeep Wrangler with Fabric Soft Top Removed

4-WHEEL-DRIVE LEVELING KIT Easy bolt-on installation Allows retention of factory shocks Tired of a low front end? Level it! 2.5" kit includes progressive leaf packs (works with existing front leaf springs), track-bar relocating brackets and U-bolts. 1.5" kit includes front single-leaf add-a-leafs and center pins. Shocks not included or required. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1999-2003 Ford F-Series Pickup Super-duty F250 & F350 with Gas Engine

SHORTY HEADER KITS Replace exhaust manifold perfectly and retain all emission fittings with no modifications! Super-long lasting! Dramatically reduce engine back pressure caused by power-robbing exhaust manifold. Let engine "breathe" better to increase horsepower and improve gas mileage. Feature 3/8" thick flanges and 16-gauge 1-1/2" mandrel-bent primary tubing. MIG-welded "O" rings always ensure perfect seal. CARB EO #D-439 approved for GM, EO #D-439-1 and D-439-3 approved for Dodge and Ford. All headers are 50-state legal except those with (A) which are 49-state legal (CARB EO applied for). Kits include 2 headers, gaskets, header bolts and instructions. Applications:1996 Dodge Dakota with 5.2L or 5.9L,1996-2003 Dodge Pickup - Full Size 1/2-; 3/4- & 1-ton with 5.2L or 5.9L

DUSTER DECK COVERS Protect back seat area from sun, rain and dust Prevent valuables from flying out of vehicle on- or off-road Matches all Bestop� accessories for "total look" Great prevention against fading and deterioration. Reduces wind resistance to improve gas mileage while providing a clean, smooth appearance. (A) For vehicles with factory soft top; covers folded bow assembly. (B) For vehicles with factory hardtop removed; includes belt rail attachment. (C) Fits only with Bestop� Supertop�; covers folded bow assembly. Applications:1992-1995 Jeep Wrangler

SUNRIDER� Single-pull zippers on all windows Attaches easily to factory belt-rail channeling system Enjoy an open-air ride�top folds back quickly without any tools! Unique folding frame assembly lets you detach the windshield header and flip the sunroof panel back for a wonderful open-air ride. Or fold the whole top back just like a convertible. Tailgate can be opened without removing the top on both YJ and TJ models. '97-02 TJ version features a new frame design that attaches to original latch locations and eliminates support bows in side windows for a cleaner look and improved visibility. Does not include doors. INSTALLING A SUNRIDER SOFT TOP: Sunrider has a unique frame design with robust hardware and there are some subassemblies in the kit. Installation time varies by model; up to 5 hours on a '97-02 TJ; up to 3 hours on a '76-95 YJ or CJ. Having another person to help will speed up the process. Allow an afternoon to fully install the top. You can see a downloadable set of Sunrider instructions which describes all the parts and installation procedures. Go to: http://www.bestop.com/installation.html Applications:1997-2002 Jeep Wrangler,1997-2002 Jeep Wrangler,1997-2002 Jeep Wrangler

CHROMED MASTER CYLINDER TOP COVERS Replace originals with these chromed die-cast metal tops Choose smooth or embossed top Mount easily with included chromed screws. Sold individually or in pairs. Applications:1988-2004 Honda Shadow Models VT600 & Deluxe,1994-2003 Honda Magna Models VF750 & Deluxe,1999-2003 Yamaha Road Star XV1600,1995-2004 Honda Shadow Models VT1100 "Ace"; "Ace" Tour; Aero & Spirit,1997-2003 Honda Shadow Models VT750 "Ace"; Deluxe & Spirit

URETHANE FRONT END BUSHING SET Replaces both inner and outer bushings with one-pc. bushing Wears like iron, impervious to dust and other contaminants For Volkswagen Beetles, Super Beetles, Ghias, Sand Rails and Dune Buggies with axle-beam front ends Made-to-last bushings are designed to help eliminate excessive front-end play, impaired handling and absorb the shocks that can damage torsion arms. Flanged outer ends mean no need for stock dust seal. Bushing replaces both inner and outer bushings. Set of 4 one-pc. bushings, except (A) which include 2 upper bushings (one-pc. inners/outers) and 4 lower bushings (separate inners and outers). Note: Stock inner bushings can be very difficult to remove; however, you can use your punch or screwdriver to push them easily past the inner lip and into the axle tube where they won't interfere with the torsion arms. Applications: Volkswagen Dune Buggy/Sand Rail with Axle-beam Front End, Volkswagen Karmann Ghia with Axle-beam Front End, Volkswagen Super Beetle with Axle-beam Front End, Volkswagen Beetle - Air Cooled with Axle-beam Front End

UNDERDRIVE PULLEY SET Save 20%! Ensures more miles from each gallon plus less stress on car's accessories Premium lightweight 6061-T6 billet aluminum computer machined to .001 tolerances Set includes crankshaft, alternator and power steering pulleys (power steering pulleys not included in Eagle/Mitsubishi set). Hardware included. Anodized pulleys shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes water pump pulleys. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1996-1999 Honda Civic

REPLACEMENT ALLOY WHEEL Save 20%! Looks like original and meets original specifications but costs much less! Replaces damaged, unsightly worn wheel and enhances look of vehicle Center caps without factory logos included. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1997-1999 Nissan Maxima Style H 16 x 6.5,1997-1999 Nissan Maxima Style H 16 x 6.5

© StoreDaily.com inc. Copyright 2008. All rights reserved. Blog