Ignition Switch @ Auto Parts & Accessories online store

Ignition Switch

IGNITION SWITCHES Exact replacements for original equipment Choose combination ignition switch and ignition lock or ignition switch with pigtail For air-cooled Volkswagens Applications:1970 Volkswagen Fastback (Aug. 1966) 12-volt,1966-1970 Volkswagen Karmann Ghia (Aug. 1966) 12-volt,1966-1970 Volkswagen Beetle - Air Cooled (Aug. 1966) 12-volt

DELUXE TRIPLE-VENTED MODULAR FULL-FACE HELMETS A JC Whitney� Exclusive! Refer to HELMET SIZING CHART B (see below) Enjoy the convenience of an open-face helmet plus the advantages of a full-face helmet Triple-vented for riding comfort�no matter what the weather! Aerodynamic, balanced design. Comfortable�and no high-speed wobble. One-piece injection-molded thermoplastic outer shell. Shock absorbent and penetration resistant. Contoured-to-fit and foam-padded one-piece expanded polystyrene inner shell. Designed to reduce impacts, improve comfort and contribute to the superb fit. Painted finish or bold, new graphics. Outer shell is sanded smooth and then painted with a high-gloss or super-fine metallic paint. Tough, durable clear polyurethane topcoat. Protects and adds extra luster and depth to the high-gloss or metallic finish. Triple-venting system. Fingertip adjustable�you control air circulation for greatest comfort and to speed up perspiration/moisture evaporation. Chin-bar and forehead vents pull air into the helmet, where it circulates freely through the lining and is directed over and around your head by channels molded into the inner shell. Fingertip adjustable flow-through top diffuser helps pull air out the helmet through the 2 exhaust vents at the rear of the diffuser. Dual-stage chin-bar venting system helps prevent face-shield fog ups: multiport upper deflector directs air up and through the inside front of the chin bar at the same time the molded-in deflector channels breath down and away from face shield. Deluxe comfort liner with dual-textured design. 2-tone black and gray lining wraps around and fits up against the front, sides and back of helmet and on the front of the extra-thick cheek padding to enhance airflow. Special sizing darts sewn throughout the lining (not just at one or two points) plus a specially padded crown section ensure a snug yet comfortable fit. Lining is tailored from a soft, hypoallergenic and breathable microfiber that's both sweat resistant and moisture absorbent. Liner and cheek pads can be removed for cleaning. Strong chin bar. Black vinyl lining. Black nylon chin strap includes comfort pads lined with gray nylon to minimize chafing. Chrome-plated metal "D" rings. Large window. Allows unobstructed peripheral vision. Flexible black gasket wraps around window and fits against face shield for a tight fit and reduced face-shield noise. Soft molded black rubber base/window trim. Multiposition flip-up ratcheting face shield. Clear optical-quality molded polycarbonate, hard coated for maximum scratch resistance. Stays where you want it�left-side finger tab makes adjustments easy. Ratcheting assembly mechanism is hidden under screw-on black plastic side pods. Modular design for easy on/off! Just press a single one-touch button at the front of the chin bar to lift or close the entire modular front (chin bar plus face shield). Lifting up the front lets you put this helmet on more ea

MAIN BEARING SET Save up to 70% on Selected Items! Perfectly matched set�complete for each make and model of engine Made to SAE specifications For American cars and trucks Available in standard or oversizes. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1933-1960 Plymouth All Models with 6-cylinder 218 engine with 3-1/4" bore; 230 engine with standard transmission,1933-1960 Dodge All Models with 6-cylinder 218 engine with 3-1/4" bore; 230 engine with standard transmission

WEATHERPROOF, WATERPROOF SPORT SEAT SHIELD SEAT PROTECTORS Fast, affordable seat protection for your weekend adventures! Petproof! Kidproof! Waterproof! Great after a fun day a the beach or a hard workout Perfect when driving with your top down�keeps your expensive seat cover clean and looking good Durable nylon (choice of colors) with waterproof urethane coating. Double-stitched elasticized edges hold protector in place. Comfortable to sit on. Rolls up for compact storage. Machine washable. Applications: All Makes All Models

Manufacturer: Prime Designs
SKU: 74ZX8551N

MOLDED SPONGE RUBBER WEATHERSTRIPPING For car and truck doors, trunks and windows Replaces worn, deteriorated originals Stops leaks and drafts High-quality automotive grade rubber. To receive a weatherstrip sample, call (877) 927-7427. Applications: All Makes All Models, All Makes All Models

TRAILMAX� PRO SEAT The best replacement seat for Jeep� vehicles you can buy Available in color-matched vinyl or vinyl sides with full-face fabric inserts (cooler in summer, warmer in winter) Top features include: the exclusive Bolster Boosters� support system; tough Atlas Frame� and durable V-ROR� Springs; ultimate Foam� padding throughout; infinitely-adjustable seat backs with single ABS-composite knob; 4-way (up, down, back, forth) adjustable headrest; trimmed mesh map pocket on seat back. Comes fully assembled. No drilling required. '97-02 Wrangler TJ require TJ Seat Adaptor Kit sold separately. Also see Trailmax Replacement Seat Risers, Trailmax Seat Sliders and Wrangler TJ Seat Adaptor Kit sold separately below. Applications:1976-1983 Jeep CJ5,1976-1983 Jeep CJ6,1976-1986 Jeep CJ7,1980-1986 Jeep Scrambler,1987-2002 Jeep Wrangler,1976-1983 Jeep CJ5,1976-1983 Jeep CJ6,1976-1986 Jeep CJ7,1980-1986 Jeep Scrambler,1987-2002 Jeep Wrangler

PERFORMANCE HEADER KIT For 4- and 6-cylinder cars, trucks, vans and SUVs Get more horsepower, better gas mileage and a smoother running engine! Custom fit for easy installation Gives more power per dollar than any other single modification. A "must" for 4- and 6-cylinder engines, as these engines are equipped with a restrictive exhaust manifold that limits engine operating efficiency and results in sluggish performance. Header lets engine "breathe" better and operate more efficiently. Improves acceleration, ensures better gas mileage and a cooler running engine. You can gain more horsepower over stock equipment with a well-tuned or slightly modified engine. MIG welded of heavy steel with flanges made to exact thickness of stock exhaust manifold. This permits installation for any stock or modified intake manifold, using stock hardware and only one stock gasket, without shims. For straight 6-cylinder and 4-cylinder one header included; for V6 two headers included (except where noted). Depending on application, headers not equipped with smog fittings. Check local emission laws before ordering. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) With EGR fitting. (B) Will not fit with automatic floor shift. Applications:1979-1989 Dodge Ram 50 2.0L; 2.6L with Evenly Spaced Exhaust Ports,1978-1983 Plymouth Arrow 2.0L; 2.6L,1976-1989 Mitsubishi Pickup 2.0; 2.6L with Evenly Spaced Exhaust Ports,1987-1988 Mazda Pickup B2600 2600c 2WD,1979-1989 Dodge D50 Pickup 2.0L; 2.6L with Evenly Spaced Exhaust Ports

REAR-VIEW MIRRORS Replace damaged original mirrors to restore driving safety Mount to original bolt holes�no drilling required Applications:1987-1988 Jeep Wrangler YJ with original soft top,1987-1988 Jeep Wrangler YJ with original soft top,1987-1988 Jeep Wrangler YJ with original soft top

LED TURN SIGNAL BLINKERS Use as super-bright turn-signal blinker or auxiliary lights Blinkers increase visibility when turning or changing lanes�alerts other drivers Each blinker incorporates 10 brilliant, long-lasting LEDs Mount easily and securely with super-strong acrylic tape. Some drilling required. Easy 2-wire hookup. Wiring harness and instructions included. Sold in pairs. Applications: All Makes All Models

CHROMED ALTERNATOR Alternator is beautifully polished and chrome plated Complete with fan and pulley For American cars and light trucks Replaces original perfectly. Remanufactured. Not for vehicles with serpentine fan belt. Pulley on Chrysler alternator is not chromed. Applications:1965-1987 Ford All Models with Separate Volt. Reg.; 61-amp,1965-1987 Lincoln All Models with Separate Volt. Reg.; 61-amp,1965-1987 Mercury All Models with Separate Volt. Reg.; 61-amp,1965-1987 Ford All Models with Separate Volt. Reg.; 61-amp,1965-1987 Lincoln All Models with Separate Volt. Reg.; 61-amp,1965-1987 Mercury All Models with Separate Volt. Reg.; 61-amp,1965-1987 Ford All Models with Separate Volt. Reg.; 61-amp,1965-1987 Lincoln All Models with Separate Volt. Reg.; 61-amp,1965-1987 Mercury All Models with Separate Volt. Reg.; 61-amp

AIR-ADJUSTABLE MOTORCYCLE SEAT CUSHIONS Ride longer�without discomfort! Air cells absorb most of the engine and road vibrations that pass through conventional seats Durable zip-on cover Free air circulation between you and seat ensures a cooler ride in hot weather. Multiple air cells virtually eliminate pressure points and maintain blood flow to legs and buttocks, helping to prevent pain, fatigue and numbness on long trips. Cushion fits on your motorcycle seat (inflated, it raises you less than 1/2" from seat). The pad and air cells are made of durable neoprene rubber. The zip-on black cover has a breathable nylon/lycra top and a nonskid polyester/vinyl base to help keep the cushion on your seat without straps or snaps. Cover is removable and washable. Flame and water resistant. Weighs approx. 1 lb. Order by cushion size. Driver's seat available in 16-1/2"W x 15"L or 13"W x 18"L. Passenger's seat is 11"W x 14-1/2"L. Patented DRY FLOATATION� technology, developed by the leading manufacturer of cushions for medical use and proven successful in healing and preventing pressure-related problems in long-term patients, distributes your weight evenly over your seat! Multiple air cells: the secret to a great ride! Unlike conventional air cushions that utilize one big air chamber, this unique pad consists of dozens of separate 1-1/4" pyramid-shaped air cells, which bend and flex to conform better to the contours of any cycle seat�and to your contour as well. You sit in the AIRHAWK� motorcycle cushion, not on it! Tiny tubes connect all of the air cells�pressure in any area is distributed throughout the entire pad for the most comfortable ride! Inflate the entire pad in just seconds! Custom tailor air pressure to your comfort with adjustable valve. Individual air cells maximize your comfort. Applications: All Makes All Models

BATTERY CHARGERS Automatic circuit breaker helps prevent overheating, shorts, overloads Compact size allows storage in glove compartment Easy to use! Attach the color-coded clips to your 12-volt battery and plug charger into 120-volt outlet. Trickle-charges battery to maintain charge overnight, or can re-charge a discharged battery in less than 12 hrs. Silicone rectifier for dependable operation, long life. 6-ft. cord. Only 1-1/2" x 2" x 2-1/2". UL listed. Applications: All Makes All Models

NEON ACCENT LIGHTING KIT Visible up to 3/4 mile away at night! Easily cut to desired length Create a cool look inside and outside on your car, truck, bike or boat Mounts easily with adhesive and hooks up to any 12-volt power source. Weatherproof, waterproof and long lasting. Provides 8,670 hours of illumination. Operates even in temperature extremes (-15� F to +120� F). Ultra-low voltage draw. Kit includes lighting strip, power transformer (easy 2-wire hookup), quick-connect connector, adhesive and instructions. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

GRINDER/SHEARS AND CUTOFF TOOL Choose combination grinder/shears or better cutoff tool Replacement 3" abrasive cutoff discs (fit all cutoff tools with 3" discs) available separately. Pkg. of 5 Applications: All Makes All Models

COLD FRONT MOUNT INTAKE An intercooler look for non-turbo cars is the ultimate way to bring cold air into your engine Polished aluminum air box holds a reusable high performance air filter (filter included) Removable plastic front shield included for wet weather Includes custom mounting brackets, tubing and all hardware to install air box in your car. Applications:1992-1995 Honda Civic

HEAVY-DUTY VINYL FULL-FLOOR PROTECTION The perfect replacement or upgrade! Tough, nonskid textured surface adds an attractive finished look Made to outlast your pickup or SUV Custom molded to fit your vehicle's floor pan perfectly. Covers entire floor from firewall to back cab wall. Black 1/8" thick heavy-duty vinyl won't tear, crack or warp even in extreme temperatures! Helps insulate and deaden road noise�lasts far longer than carpeting. Hose off with water to clean. 40-oz. pad underlay included. The coverage will vary depending on application. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Front section only (B) 2-pc. set (Passenger) Coverage up to back of rear seat (Complete) Coverage of passenger and cargo areas (also middle and rear cargo areas for Suburban) Applications:1982-1990 Ford Bronco II Heavy-duty Vinyl (Complete)

BLACK LIGHT UNDER-CAR LIGHT KIT Makes colors glow in the dark for a startling effect! Hardwires into 12-volt system Light tubes are made of water-resistant, high-impact acrylic Kit includes two 48" tubes and two 36" tubes with built-in transformer, switch, in-line fuse, wire, mounting brackets, hardware and instructions. Applications: All Makes All Models

HEAVY-DUTY TRANSMISSION OIL COOLER Keeps oil temperatures cool to prevent destructive oxidation, acid formation and cracked seals Unit includes 10 rows of 1/2"OD copper tubes?cool 50% faster than aluminum! Every 20? drop in fluid temperature doubles fluid life Easy, vibration-resistant installation. No cutting required. Exclusive guards protect heat-extracting fins, as well as your hands during installation. Handles trucks up to 22,500-lbs. gross weight. Black powder-coat finish. Includes hardware, hose and fittings. 3/4" x 17" x 12-1/2". Applications: All Makes All Models, All Makes All Models

WINDOW CHANNEL KIT Replaces original perfectly Conforms easily to desired contoured�will not kink or buckle For '28-95 2- and 4-dr. cars, 2-dr. trucks without metal frame around glass and full-size vans Seals out dust, dirt and rain. Eliminates window rattles. U-shaped channels guide glass. Enables window regulators to function properly. Adhesive included. 2-dr. kit services 2 windows. 4-dr. kit services 4 windows. (A) Kit contains rigid window division filler channel (for front door). Applications:1974-1993 Plymouth Van - Full Size,1974-1993 Dodge Van - Full Size,1974-1993 Plymouth Van - Full Size,1974-1993 Dodge Van - Full Size

RACE FLAG-STYLE FLOOR MATS Bright licensed logos and checkered flag styling give a competition look to your interior Molded-in colors won't wear out or peel off Heavy-duty rubberized vinyl provides maximum protection to your carpet Mats can be trimmed to fit floor area perfectly (excluding NASCAR mats). Approximately 27" x 17". Sold in pairs. Applications: All Makes All Models

REPLACEMENT AIR FILTERS Ideal replacement for old or new models! Specially treated quilted paper filter traps dirt and abrasives before they can cause damage Engine breathes better for improved performance and gas economy. Applications: Harley-Davidson All Models with S & S Teardrop Air Cleaner

RADIATORS Free-flowing water passages ensure greater heat dissipation for better cooling efficiency Replaces original perfectly! New and ready to install Radiator cap not included. Check number of rows or cooling tubes on your existing radiator, then order the appropriate new radiator. Limited lifetime warranty. Warranty does NOT apply to radiators used for commercial purposes. Prices listed are not for diesel applications; call (800) 571-5050 for prices. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. WHAT RADIATOR SHOULD YOU BUY? You can order a radiator with the same number of rows of cooling tubes (1, 2, 3 or 4) as existing radiator. To determine the number of cooling tubes, simply remove the radiator cap (be sure it's cool) and count the rows from front to back. If there isn't a cap, count the external rows that pass through the cooling fins. You can order a radiator with more rows of cooling tubes than existing radiator. To verify that a radiator with more cooling tubes will fit in your vehicle, please call (800) 628-5442. Orders cannot be taken at this number. Applications:1978-1985 Volvo 260 Series 260; 6; except diesel

PRIX OPEN-FACE HELMETS WITH MATCHING BOLT-ON VENTED VISOR Aerodynamic flow-through visor directs air up and over helmets to reduce drag Refer to HELMET SIZING CHART A (see below) Removable visor is painted to match color of helmets and clear-coated to resist scratches Easy to wear helmets feature a balanced, secure fit without wobble and aerodynamic design to minimize wind drag. One-piece outer shell is made with an injection-molded, specially modified thermoplastic alloy that's lightweight yet tough enough to dissipate impacts and resist penetration. Sanded-smooth outer shell is coated with premium paint. Super-fine flakes are used on metallic helmets to achieve the brilliance and depth of color. Tough, high-gloss clear polyurethane protects the painted finish against scuffs and scratches as well as permits easy soap and water cleanups. The oval PRIX logo is applied to the helmets over the clear coating and may be removed if desired. Comfort-contoured one-piece polystyrene inner shell absorbs any "leftover" shocks. Plush brushed black microfiber nylon lining with bonded-on foam backing is sweat resistant?you'll stay cool when the temperature isn't. Black double-stitched chin strap with chromed steel "D" rings is partially enclosed and padded on each side for comfort. Smooth molded black rubber trim. Meet or exceed DOT specifications. Replacement visor and mounting screws sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models Size 2

MAGNETIC FAST FLAMES AND TEARDROP GRAPHIC SETS Magnetic backing for quick installation, effortless design changes and quick removal! Hot, multicolored accents make car, truck or cycle a real standout! Fade-resistant .015" thick vinyl with magnetic backing won't fall off�wind tunnel tested at 110 mph. Great for dressing up tool boxes, too. Custom color sets include 2 large (5-1/2"H x 23-1/2"L) flames, 2 mid-size (2"H x 11"L) and 2 flame licks (1-1/2"H x 5-1/2"L). Applications: All Makes All Models, All Makes All Models, All Makes All Models

VENTED FULL-FACE STREET HELMET Fingertip-adjustable forehead and chin-bar vents ensure all-around ventilation to help you stay cool Refer to HELMET SIZING CHART A (see below) Clear optical-quality injection-molded Lexan? face shield is treated with long-lasting anti-fog coating A JC Whitney? exclusive! Engineered from the inside out for superior fit and riding comfort! Multiposition ratcheting shield has center tab for effortless adjustments. Ratchet assembly is concealed under screw-on side pods (pods are painted to match helmet). Designed for a quiet ride?extensive wind tunnel tests prove it! Padded and lined integral chin bar. Aerodynamic design of the outer shell plus the balanced weight throughout help prevent high-speed wobble. Combination of the one-piece specially-modified thermoplastic alloy outer shell and the one-piece polystyrene inner shell resists penetration and absorbs the brunt force of impacts. Comfort-contoured breathable foam padding (bonded to the inner shell) is lined with plush brushed perforated black microfiber nylon and features sewn-in sizing darts throughout to ensure a super fit and hours of relaxed riding. Revolutionary lining is sweat resistant?you won't feel clammy even on hotter days. Outer shell is triple sanded smooth before the premium paint is applied (for the metallics, only super-fine flakes are used to achieve the depth and brilliance). Tough high-gloss clear polyurethane coating protects the painted finish/graphics against scuffs and scratches and permits easy soap and water cleanups. Prix logo is applied over the clear-coat finish and can be removed if desired. Cushioned black nylon chin straps are double stitched to the steel double "D" ring retention system for strength. Smooth, molded black rubber base and window trim adds the perfect finishing touch. Meets or exceeds DOT standards. Replacement face shield and side pods (set of 2 with hardware) sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models, All Makes All Models

CUSTOM-FIT OUTLAND� FRONT GUARD GRILLE GUARDS Bold protection for your grille, bumper & lights 1-1/2" polished stainless steel tubing (.049 wall) 1-1/2" chrome-plated or black steel tubing (.60 wall) Heavy-duty 1/4" thick steel uprights/side plates with black rubber impact strips Easy, rigid frame-mount installation�no drilling Cross bars have predrilled mounting locations for auxiliary lights (not included). Bolt-together modular design requires some assembly. The perfect complement for Smittybilt� taillight guards & step rails. Include gaskets (minimize metal-to-metal contact), hardware, instructions. (A): Tow hooks must be removed. (B): Spoiler must be modified. (C): Includes diesel models. Applications:1992-1998 Jeep Grand Cherokee Laredo

CHROME-PLATED SEAT ACCENT RAILS Save 30% on Select Items! Custom-fit decorative rails, beautifully chrome-plated, add attention-getting good looks Choose side rails (sold in pairs), wraparound rail�or use both together for a complete look! Strong 5/8" diameter steel tubing bolts on easily at existing mounting points with existing hardware. Easy installation rails make bike look like a winner. No modifications or drilling needed. Side rails mount by the left and right sides of passenger section. One-piece wraparound rail wraps around the 2 sides and rear of passenger section. (A) Not for use with original-equipment sissy bar. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1998-2000 Kawasaki Nomad VN1500 G

STEEL FENDERS AND REPAIR PANELS Repair rusted and damaged areas Strong die-formed steel panels match contours perfectly Easy-to-paint primer finish. Some surface prep required. Easy screw-on, rivet-on or weld-on installation, depending on application. Fenders are bolt-on replacements. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Includes fender flare. (B) 2-door only. Applications:1962-1991 Jeep Cherokee 4-dr.,1962-1991 Jeep Wagoneer 4-dr.,1962-1991 Jeep Grand Wagoneer 4-dr.

DUAL-PORT MANIFOLD END KITS Replace worn or rusted manifold ends. Kit includes 2 reconditioned stock end castings, 2 intake gaskets, 2 red urethane intake boots and 4 stainless steel clamps. Applications: Volkswagen All Models Air-cooled Manifold Ends

DRIVING LIGHTS WITH 3-COLOR GLOW RINGS A beautiful new twist in driving lights�color! Accent ring illuminates when you turn on the driving lights Ring features 5-Watt bulbs that "colorize" the outside edge of each light Change the colors (red, green, blue) by simply changing the color cap for the bulbs. Includes 2 lights, universal mounting brackets, wiring harness, color caps. Limited 1-year warranty. Applications: All Makes All Models, All Makes All Models

BUMPER GUARDS Save 20% ! Prevent nicks and scratches�save on repairs and keep resale value high Front or rear bumper guards available (fog-light mounting kit sold separately) For pickups, vans and SUVs Chrome-plated heavy-gauge bumper stock steel. Contoured for proper fit�no drilling for most applications. Guards have an impact strip on face. Include hardware and instructions. Sold in pairs. (A) Fits bumper with rubber/plastic impact strip. (B) Fits bumper without impact strip. (C) Some drilling required. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1994-1997 Dodge Van - Full Size

LEATHER LUMBER SUPPORT CUSHION The ultimate in driving comfort�cool in the summer, warm in the winter Ergonomic support in a full-sized portable cushion Fits virtually any vehicle Anatomically contoured to reduce tension, relieve fatigue and help prevent aching muscles. Cushion adds lumbar support and features padded wings for extra comfort. Smooth, supple leather top and durable nylon polyester backing over foam fill. Attached elastic straps hold cushion snugly in place, whether it's on a split bench seat, bucket seat or a chair in your home or office. Approx. 18"W x 39"L. Great for passengers and drivers alike. Applications: All Makes All Models

CRANKSHAFT REPLACEMENT GEAR For '61-79 Volkswagen 1200-1600cc engines Replaces old or damaged part for improved engine performance Applications:1971-1972 Volkswagen 411,1962-1973 Volkswagen Squareback,1961-1979 Volkswagen Beetle - Air Cooled,1961-1979 Volkswagen Dune Buggy/Sand Rail,1973-1975 Volkswagen Super Beetle,1973-1974 Volkswagen 412,1973-1974 Volkswagen Thing,1961-1974 Volkswagen Karmann Ghia,1962-1973 Volkswagen Fastback

CHROME-PLATED ENGINE DRESS-UP KIT Top-quality materials, chromed and polished to a brilliant luster Virtually every "goody" you need to brighten and enhance your engine Not for diesel engines. You may need to check local emissions laws before ordering. Kit includes rubber grommets for breather cap and PCV valve (if required, depending on application). Kit components (this will vary depending on application): (A) 2 low-rise steel valve covers; (B) 14" diameter high-performance air cleaner (fits 4-bbl. carbs with 4-7/32" to 5-1/8" neck); (C) 2 wire loom brackets; (D) timing chain cover; (E) valve cover hold-down straps; (F) pull-apart wiring bolts; (G) timing tab; (H) throttle return spring bracket; (J) dipstick and tube; (K) oil breather cap; (L) distributor hold-down clamp; (M) oil filter cover; (N) universal-fit alternator bracket; (O) water neck; (P) vacuum advance cover; (R) power steering cap cover; (S) coil cover. Air cleaner adapters for 2-bbl. carbs and timing cover gaskets sold separately. Applications:1968-1987 Mercury All Models with 460 cu. in. Engine with 7-bolt valve covers,1968-1987 Lincoln All Models with 460 cu. in. Engine with 7-bolt valve covers,1968-1987 Ford All Models with 460 cu. in. Engine with 7-bolt valve covers,1968-1990 Mercury All Models with 370; 429 Engine with 7-bolt valve covers,1968-1990 Lincoln All Models with 370; 429 Engine with 7-bolt valve covers,1968-1990 Ford All Models with 370; 429 Engine with 7-bolt valve covers

"MIND BLOWER" SUBWOOFER TUBE Low-down bass at a very affordable price! Bass-reflex vent for added sub-bass response and quick-connect terminals High-power polymer-laminated woofer Carpeted premium-quality tube is easier to install than most box enclosures. Black steel waffle grille (included) protects woofer. Applications: All Makes All Models 300-Watt Subwoofer Tube; SPL @1W/1M: 110 dB; 18" x 11-1/2"

TRU-TIME CAM GEAR Increase horsepower and torque without any cam changes! Provide significant performance gains by allowing precise camshaft adjustments Feature true laser-etched markings and precision cut gear teeth that are guaranteed to match the Original Equipment (OE) drive tooth profile Gears can be advanced or retarded up to 10 degrees each way in one degree increments Enable an engine�s cam timing to match its tuning state, whether it is stock, modified, forced-induction or normally-aspirated. These gears are used by top race teams throughout the world and are a must when the cylinder head or block is milled or where aftermarket or reground camshafts are installed. Made from 6061 T-6 billet aluminum, each gear is strong and lightweight. All are CNC machined for superior precision and craftsmanship. Black anodized belt surfaces for increased durability. Laser-etched graphics for show-quality looks. DOHC applications require 2 cam gears. All cam gears sold separately. Applications:1985-1987 Honda Civic,1985-1987 Honda CRX,1992-1996 Honda Prelude F22A1,1996-1999 Acura Integra,1999-2000 Honda Accord 4-cyl.,1985-1987 Honda Civic,1985-1987 Honda CRX,1992-1996 Honda Prelude F22A1,1996-1999 Acura Integra,1999-2000 Honda Accord 4-cyl.

ILLUMINATED FLASHING STROBE LED STROBE SHIFT KNOB Featuring an illuminated colored acrylic dome with 4 changeable patterns?one's just right to fit your mood! Chrome-plated base For your manual transmission vehicle Easy-to-install. No wiring! Batteries included. Applications: All Makes All Models

CUSTOM-STYLED MOTORCYCLE BELTS Chrome-plated metal buckles and keepers 8 custom styles available Great-looking belts in a style and size you want Measure approximately 1-3/8"W with nonremovable buckles. Most styles combine black-dyed genuine leather end sections with chrome-plated die-cast middle sections featuring custom-designed patterns. How to Order: Measure waist size over pants where belt is normally worn and order corresponding size. If between size ranges, order the larger size belt. Applications: All Makes All Models S (30-32)

OIL FILLER CAP Quality made from CNC-machined billet aluminum Adds eye-catching style to your engine compartment! O-ring included for a leakproof seal. Applications: Mitsubishi All Models

CUSTOM-FIT HIGH-PERFORMANCE SHIFTERS Ensure fast, smooth and accurate shifts Choose from 3 styles For air-cooled Volkswagens Positive-reverse lockout prevents accidentally shifting into reverse. Include chrome shaft and black boot. Easy bolt-in installation. Do not fit Type II Buses. Applications:1952-1978 Volkswagen Beetle - Air Cooled,1952-1978 Volkswagen 411,1952-1978 Volkswagen 412,1952-1978 Volkswagen Fastback,1952-1978 Volkswagen Squareback,1952-1978 Volkswagen Karmann Ghia,1952-1978 Volkswagen Super Beetle,1952-1978 Volkswagen Thing,1952-1978 Volkswagen Rabbit,1952-1978 Volkswagen Scirocco,1952-1978 Volkswagen Dasher,1952-1978 Volkswagen Bus,1952-1978 Volkswagen Transporter,1952-1978 Volkswagen Vanagon,1952-1978 Volkswagen Beetle - Air Cooled,1952-1978 Volkswagen 411,1952-1978 Volkswagen 412,1952-1978 Volkswagen Fastback,1952-1978 Volkswagen Squareback,1952-1978 Volkswagen Karmann Ghia,1952-1978 Volkswagen Super Beetle,1952-1978 Volkswagen Thing,1952-1978 Volkswagen Rabbit,1952-1978 Volkswagen Scirocco,1952-1978 Volkswagen Dasher,1952-1978 Volkswagen Bus,1952-1978 Volkswagen Transporter,1952-1978 Volkswagen Vanagon

EMPI MUD FLAPS Protect vulnerable finish from gravel, tar, dirt, etc. Heavy-duty 1/4" thick rubber accented with bold EMPI logo No drilling needed. Steel mounting brackets and hardware included. Sold in pairs. Applications:1958-1978 Volkswagen Beetle - Air Cooled,1958-1978 Volkswagen Super Beetle

HEADER/STINGER With competition merged collector Choose unpainted (raw) or chrome-plated Four 1-1/2" diam. pipes allow gasses to gradually merge at the collector. Pipes are held in place by heavy-duty springs which allow removal of one cylinder head without disturbing the opposite side. Built-in flex prevents breakage. For all Baja Bugs, Dune Buggies and Sand Rails equipped with '66-73 1300cc, 1500cc or 1600cc Beetle, Super Beetle or Ghia rear-mounted engine. Includes hardware and instructions. Fiberglass-wrapped baffle (if needed) available separately. Note: Not legal for sale or use on California pollution-controlled motor vehicles. Applications: All Makes All Models

RECEIVER-MOUNT COMBINATION BALL HITCH/PINTLE HOOK For towing trailers with ball coupler or lunette rings Mounts in all 2" receiver tubes Up to 12,000-lb. gross tow weight rating and 2,400-lb. vertical-load rating New design allows towing of just about any trailer on the road! Design also eliminates need for a costly assembly consisting of a ball hitch, pintle mount and mounting hardware. Slides into and secures easily in existing receiver hitch. Spring-action lever locks unit in place on top of ball. Dual-locking setup for safety. Stores under seat or in trunk when not needed. Accepts pintle rings and lunette eye couplers. Heavy-duty drop-forged steel with corrosion-resistant powder-coat finish. Hitch ball made of hardened chrome-moly steel. Do not exceed rated capacity of receiver tube. Applications: All Makes All Models l-7/8" Ball GTW: 2;000 lbs.

REMOTE KEYLESS ENTRY SYSTEMS Remotely lock and unlock your vehicle and open your power trunk with the push of a button 4-button extended range remote transmitter with slider protection For all vehicles with power door locks Keyless entry with onboard relays. Easy to install in less than 20 minutes. Output for starter immobilizer and remote trunk release (immobilizer and remote trunk release accessories sold separately). Applications: All Makes All Models, All Makes All Models

CUSTOM-FIT OUTLAND� FRONT GUARD GRILLE GUARDS Bold protection for your grille, bumper & lights 1-1/2" polished stainless steel tubing (.049 wall) 1-1/2" chrome-plated or black steel tubing (.60 wall) Heavy-duty 1/4" thick steel uprights/side plates with black rubber impact strips Easy, rigid frame-mount installation�no drilling Cross bars have predrilled mounting locations for auxiliary lights (not included). Bolt-together modular design requires some assembly. The perfect complement for Smittybilt� taillight guards & step rails. Include gaskets (minimize metal-to-metal contact), hardware, instructions. (A): Tow hooks must be removed. (B): Spoiler must be modified. (C): Includes diesel models. Applications:1992-1998 Jeep Grand Cherokee Laredo

STABILIZER JACK SET Easy to adjust with speed crank�no need to crawl under trailer Designed for precise leveling and stabilizing of pop-up and lightweight travel trailers. Rust-resistant heavy-duty steel jacks are sturdy (750-lb. static load per leg). Bolt to frame cross members and adjust from 3-1/2" to 17" high. Set includes 2 jacks, speed crank, hardware, instructions. Manufacturer's limited lifetime warranty. Order 2 sets to level/stabilize front and rear of trailer. Applications: All Makes All Models, All Makes All Models

LEAF SPRINGS - EXTRA-HEAVY-DUTY Specifically engineered to improve suspension performance and safety on vehicles carrying large loads or towing heavy trailers! Hard-working vehicles need these heavy-duty springs True load-handling performance for constantly loaded vehicles Sag and sway control for safer operation Provide level, secure ride Made of precision alloy steel, oil tempered and heat treated for uniform strength. Install in pairs for level ride and safety. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1992-2000 Ford Van - Full Size Econoline Van; E150 (2-1/2" wide); 2150 lb. Capacity; 5 Leaves; Rear Type

BOW TIE BOLT KIT "Bow Tie" emblem stamped on each bolt head! Adds the finishing touch to your Chevy's engine compartment Kit includes all bolts and washers (where applicable) for: intake manifold, valve cover, water outlet, water pump, timing cover, fuel pump, oil pan, distributor hold-down, exhaust header or manifold. Small block kit includes bolts for both extended and short water pump. Big block kit includes bolts for extended water pump only. Applications: Chevrolet All Models Grade #5

STARTER No exchange necessary! Factory remanufactured and tested to ensure trouble-free performance Applications:1967-1979 Volkswagen Beetle - Air Cooled Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen Fastback Manual Transmission 1500 & 1600cc,1967-1975 Volkswagen Vanagon Manual Transmission Starter,1967-1975 Volkswagen Transporter Manual Transmission Starter,1967-1975 Volkswagen Bus Manual Transmission Starter,1967-1979 Volkswagen 412 Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen 411 Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen Thing Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen Super Beetle Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen Squareback Manual Transmission 1500 & 1600cc,1967-1979 Volkswagen Karmann Ghia Manual Transmission

RACING FLOOR MATS Bold design, bright colors and RACING emblem give these mats their true high-performance look! Made to last�heavy duty rubberized vinyl withstands extreme use for long life Antiskid nibbed backing helps hold mats in place to better protect floor covering Not for the timid�these mats will get noticed! Molded-in color won't wear through or peel off. Applications: All Makes All Models

NEXT GENERATION EURO TAILS KIT A unique combination of clear lens, sharp housing plus unique red reflector lens that uses original clear bulbs! Lens assembly meets all DOT requirements Easy to install A new look for a new generation! Applications:2000-2002 Toyota Celica

TUBELESS TIRE REPAIR GUN KIT Professional caliber. Gun forces plug into hole and double-seals tire. Mushroom-headed plug expands to seal inside of tire, the body of plug seals tread. Includes gun with 2 nozzles, probe, fifty 5/16" plugs, fifteen 7/16" plugs, 8 oz. of nonflammable chemical cement and instructions. Also available (sold separately): additional plugs, vulcanizing plugs, vulcanizing cement and replacement nozzles. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

Manufacturer: Spacemaster
SKU: 83ZX0843T

AUXILIARY RADIATOR COOLER KITS For all cars, trucks, vans and RVs Kits increase radiator capacity to help your engine "breathe" for lasting performance Mounting versatility! Can be mounted easily on front of radiator for maximum cooling, on frame at 45? angle, behind air conditioner condenser, behind radiator or under fan. Kits include cooler unit, 5/8" hose, hardware and instructions. Applications: All Makes All Models

CUSTOM-FIT DASH AND DOOR TRIM KITS Save 20% on Selected Items! Large custom-molded components cover more area and install in much less time compared to conventional kits with multiple small pieces Cost a small fraction of what you'd pay for comparable factory/dealer-installed trim Scratch-resistant high-gloss premium-quality finish bonded to an ABS structure to achieve the exceptional look and great fit. Easy to install with included 3M� adhesive mounting system. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:2000-2002 Ford Excursion

BODY REPLACEMENT AND REPAIR PANELS Repair rusted and dented body sections with perfect-fit, die-formed and shaped body panels Heavy-gauge primer-coated steel prohibits rust Install easily with screws, by welding or by riveting (welder or rivet gun not included); hoods, hood hinges, running boards and rear deck lids bolt on. Finish with epoxy filler (sold separately) and paint. NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck. Applications:1954-1979 Volkswagen Super Beetle,1954-1979 Volkswagen Beetle - Air Cooled

TRAILER COUPLERS Couplers available in several styles and sizes Applications: All Makes All Models SAE Class I; fits 2" O.D. tongue, All Makes All Models SAE Class I; fits 2" O.D. tongue

PROJECTOR HEADLIGHT KITS Precision manufactured to car's exact OE specifications for effortless installation and exact fit Kits include complete headlight assembly (bulbs not included). Headlights with clear lenses are street legal (amber bulbs must be used on sides). Gold lenses produce a stunning rainbow effect. Blue lenses for a cool blue look. Gold and blue lenses are for show only. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2002 Honda Accord

WINDOW CHANNEL KIT Replaces original perfectly Conforms easily to desired contoured�will not kink or buckle For '28-95 2- and 4-dr. cars, 2-dr. trucks without metal frame around glass and full-size vans Seals out dust, dirt and rain. Eliminates window rattles. U-shaped channels guide glass. Enables window regulators to function properly. Adhesive included. 2-dr. kit services 2 windows. 4-dr. kit services 4 windows. (A) Kit contains rigid window division filler channel (for front door). Applications:1933-1934 Buick All Models 2-dr. Cars,1933-1934 Cadillac All Models 2-dr. Cars,1933-1934 Chevrolet All Models 2-dr. Cars,1958-1960 Chrysler All Models 2-dr. Cars,1958-1960 Dodge All Models 2-dr. Cars,1958-1960 Plymouth All Models 2-dr. Cars,1933-1934 Oldsmobile All Models 2-dr. Cars,1933-1934 Pontiac All Models 2-dr. Cars,1955-1963 Chevrolet All Models 2-dr. Pickup,1955-1963 GMC All Models 2-dr. Pickup,1952-1965 Ford All Models 2-dr. Pickup

NEON WHEEL-WELL LIGHT KIT The perfect complement to our under-vehicle kits Fills in any light "blanks" with a matching- or contrasting-color glow Kit works great on ATVs or snowmobiles, too! Neon tubes are made of water-resistant, high-impact acrylic. Kit includes four 12" tubes, Pro Series variable-output transformer, on/off switch and hardware. Applications: All Makes All Models, All Makes All Models

SHORT-THROW SHIFTER KIT Engineered with a highly modified mechanical advantage (not just a shorter handle) to shorten the throw while maintaining a smooth, ultra-precise shift Reduces throw by an amazing 30% to 50%! No "notchy" feel common to stock and conventional short shifters Performance plus reliability from a leader! Beefy, solid construction takes all the fast shifts you can throw at it! Looks terrific?comes with a high-gloss black powder-coat finish, a black zinc finish or a bright anodized finish (depending on application). Shifter features CNC-machined steel billet handle and CNC-machined 6061 T6 billet aluminum adapters. Applications:1998-1999 Volkswagen Passat (May '99)

SOUND-ACTIVATED MULTICOLORED LIGHT TUBE Sound intensifies the incredible bold, different colors for an incredible lighting effect Water-resistant high-impact acrylic Includes tube, built-in transformer with sound activator, wire, connectors, cigarette lighter adapter and on/off switch. Applications: All Makes All Models

PERFORMANCE GEAR REDUCTION STARTER Ends all hot start problems�forever! One year manufacturer warranty Get total starting power! Far superior to original equipment. 100% more torque�4.4:1 gear reduction, roller bearing support and integrated solenoid ensure this starter can crank any engine, no matter how high its static compression. 200% more cranking power. More starts�20,000 starts vs. 5,000 for stock. Uses less amperage. Turns faster under load, slower under no load and is more cold-weather resistant. Enhanced rock/hill climbing ability with clutch-free starting. 1/3 smaller size and weight for easy installation. Heavy-duty construction and extreme reliability are the primary hallmarks of this performance gear reduction starter. Five sealed ball bearings increase efficiency, reduce wear and thrive under extreme conditions, like water intrusion. Integral solenoid is corrosionproof and heat-sinked to prevent overheating and thermal breakdown. Stainless steel mainshaft provides direct line engagement, which increases even further efficiency, power and reliability. Also, the rotating billeted aluminum nose cone adapter can be turned in 20� increments (depending on application) to clear headers, oil pans or other obstacles. Depending on application there are dual-bolt patterns so they fit both the 153-tooth and 168-tooth flywheels. PSI certified and approved. All applications are for gas engines except where noted. Applications: Ford All Models 8-cyl big block 351M; 400; 429; 460

HOTWIRES SPARK PLUG WIRE SET Exclusive built-in capacitor delivers a spark 300 times greater than conventional wires! The only wire set track and street tested to deliver more horsepower (up to 5%!) and reduce emissions! Creates a super-powerful discharge that ignites every fuel mixture, rich or lean, much better than a conventional spark Combustion is faster and more complete, resulting in more power and a cleaner burn. Ensures faster acceleration, higher top speed, easier startups, increased torque and no more plug fouling. Available in seven hot colors Hot Red, Blue, Yellow, Orange, Purple, Silver and Black. Applications:1986-1992 Mazda RX-7 inc. Turbo

CHROMED AIR CLEANERS Check local emission laws before ordering For 1-, 2- and 4-bbl. carburetors. Choose 4" diam. x 3-1/4"H for 1- and 2-bbl. carburetors with 2", 2-5/8" or 2-5/16" neck; 10" diam. x 3-1/2"H for 2- and 4-bbl. carburetors with 2-5/8", 4-7/32" or 5-1/8" neck; 4-1/2" diam. x 3-1/2"H Louvered Air Cleaner for 1- and 2-bbl. carburetors with 2-5/8" neck; 14" diam. x 3"H for 4-bbl. carburetors with 4-7/32" or 5-1/8" neck; or Chromed Air Cleaner Shield for dress-up styling, fits any 14" diam. x 3"H air cleaner with lip. Check local emission laws before ordering. Applications: All Makes All Models

RIDE CONTROL LOAD-ASSISTING ADJUSTABLE AIR SPRINGS Specifically designed for mid- and full-size trucks used for light- to medium-load towing Ensure the smoothest ride on loaded or unloaded vehicles Adjust to vehicle's load condition for improved driving comfort and control. Prevent sag when hauling a heavy load or towing, causing trailer and body sway, a rough ride, vehicle bounce and even bottoming out. Will also support "softer" original-equipment suspensions without changing the ride. Provide up to 2,500 lbs. of leveling capacity. Simply inflate or deflate to adjust spring rate, restore ride height and stop bounce, dip and vehicle sway. Easy do-it-yourself installation with simple hand tools. For rear leaf springs. 2 air springs, 2 inflation valves, all fittings, air lines, mounting hardware and installation instructions included. Use service station air hose to inflate springs or order an on-board air supply system (sold separately). Never exceed manufacturer's recommended gross vehicle rating. Sold in pairs. Applications:1998-2001 GMC Yukon 4WD (exc. 2-dr. Models),1995-2001 GMC Yukon 2WD (exc. 2-dr. Models),1992-1997 GMC Yukon 4WD 2-dr.,1998-2001 Chevrolet Tahoe 4WD 4-dr.,1995-1997 Chevrolet Tahoe 4WD,1995-2001 Chevrolet Tahoe 2WD 4-dr.,1999.5 Chevrolet Suburban 1/2 ton,1992-1999.5 GMC Suburban 1/2 ton,1992-1994 Chevrolet Blazer - Full Size 4WD 2-dr.,2000-2001 Cadillac Escalade 4WD 4-dr.

ALTERNATOR BRACKET SETS Include upper and lower mounting brackets (where required) Bolt on easily�no modifications required For American vehicles Duplicate-of-original equipment design. Look great with other chrome items. Applications: Ford All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Lincoln All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Mercury All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Ford All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Lincoln All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Mercury All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Ford All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Mercury All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom), Lincoln All Models w/289; 302 (exc. Boss) and 351 W Engines; 2-pc. Set (Top and Bottom)

© StoreDaily.com inc. Copyright 2008. All rights reserved. Blog