Hood-width Bug Deflectors @ Auto Parts & Accessories online store

Hood-width Bug Deflectors

HOOD-WIDTH BUG DEFLECTOR Extra-thick smoke-tinted Composilite� polymer is super tough, super scratch resistant High-profile hood-width design Contoured to match your truck's lines Out most affordable bug deflector�and you won't find it anywhere else! Made only for JC Whitney�your guarantee of top quality, top styling and unbeatable low price! Applications:1997-2001 Ford F-Series Pickup F150 & F250 Light Duty,1997-2001 Ford Expedition

HIGH-SPEED TUBELESS TIRE Designed for good cornering and floatation for boats and camping trailers Enjoy carefree, trouble-free and safe driving with these high-quality tires Long-wearing ozone-protected wraparound treads for maximum mileage Nylon cord body. Meets DOT standards. Cannot be shipped express. Applications: All Makes All Models

HOIST-A-TOP� KITS Now one person can safely remove, store and replace any hardtop in minutes The only system that lifts and stores top in up position Uses a sturdy steel frame, steel (not rope) cables and special lift mechanism Hoist-a-Top� is a complete turnkey system. Easy to install and use. Simply attach the super-strong steel frame to your top using the no-mar rubber-coated hooks. Special cable-pulling mechanism lifts top to the ceiling for out-of-the-way storage. The 7-ft. to 10-ft. working range allows Hoist-a-Top� to handle top removal and storage in most garages and carports. Top stores in the lifted position. No drilling�no pulled muscles, strained back or dropped/damaged top. Works with all one-piece and 2-piece hardtops. Detailed instructions and foam-covered hardware included. Applications: Jeep All Models

STICK-ON WEATHER STRIP Samples available Choose from a variety of sizes Great for car trunks as well as auto, home and garage doors and windows High-quality SBR blend neoprene black foam rubber. Seals out cold, moisture and road noise�acts as a cushion to end rattles. Resists breakdown if exposed to gasoline and other automotive chemicals. Closed-cell construction resists moisture retention and ensures a good seal. Pressure-sensitive, self-adhesive backing for easy installation. To receive a weather strip sample, call 312.431.6103. Applications: All Makes All Models

WEBER IDF DUAL CARBURETOR KIT Bolt-on horsepower, performance and reliability for your air-cooled Beetle Complete! Kit includes carburetors, offset aluminum manifolds, hex-bar linkage, air cleaners, fuel line and mounting hardware. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: Volkswagen Beetle - Air Cooled

LEAF SPRINGS - HEAVY-DUTY 1,000- to 4,500-lb. capacity per pair For light- and medium-duty trailers 3 styles: double-eye springs; slipper springs with hook end; slipper springs with open eye. NOTE: Always replace springs in pairs. Applications: All Makes All Models

Manufacturer: Mile High
SKU: 18ZX4446A

RACING DECAL Top-quality vinyl decal Asian script lettering defines your car or driving style Measures 3-1/2"W x 6"H. (A) Measures 3-1/2"W x 7-1/2"H. Applications: All Makes All Models

HEAVYWEIGHT RUBBER BED AND TAILGATE MATS 50% thicker than other blended cord mats to last longer and absorb shocks and muffler road noise better Molded 3/8" thick Nyracord� rubber won't rust, crack or break even in the worst weather! Lengthwise raised ribs make it easier to slide cargo on or off. Knobby underside allows airflow under mat to prevent moisture buildup and rust. Slip in one-piece mat for messy hauling jobs; lift out to restore pickup's bed to original appearance. Easy soap and water cleanups. Fits Fleetside beds; trim to fit shorter beds. Applications:1988-2003 GMC C/K Pickup 2-dr.,1988-2003 Chevrolet C/K Pickup 2-dr.

SHIFT KNOBS See and feel the difference every time you shift Choose from 3 styles Add a unique look and a fun feel to your driving! Quality construction for years of great service and great looks. Fit all manual shifters�threaded adapters included. Applications: All Makes All Models

PERFORMANCE HEADER SET Replaces exhaust manifold perfectly and retains all emission fittings�no modifications! Custom-fit header set is performance tuned and engine matched to unleash your vehicle's full potential Up to 35% more flow than stock for power and torque gains you can feel! Performance gains achieved in low- and mid-range RPM range�ideal for street and highway speeds Mandrel-bent heavy-gauge tubing streamlines gas flow for better performance�more horsepower, cooler running and longer-lasting engine. Corrosion resistant. 50-state legal. Set includes premium gasket and hardware. Will not void manufacturers' new truck warranty. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. COMPARE THE GIBSON DIFFERENCE! HORSEPOWER ��TORQUE (FT./LBS.) RPM Stock Gibson Increase Stock Gibson Increase Chevy 5.7L F.I. 2500 130 150 20 273 315 42 3500 160 195 30 240 300 60 Ford 5.8L F.I. 2500 130 155 25 273 326 43 3500 163 190 25 248 285 37 Dodge Dakota 5.2L 2500 100 120 20 210 252 42 3500 155 195 40 233 292 59 Applications:1988-1995 GMC C/K Pickup 1500 & 2500 4.3L with Air Injection and with O2 Sensor Fitting,1988-1995 Chevrolet C/K Pickup 1500 & 2500 4.3L with Air Injection and with O2 Sensor Fitting

MAGNETIC OIL FILTER Magnetically removes particles as small as 2 microns from circulating in engine oil The best protection your engine will ever get! Removes harmful, abrasive metal particles conventional oil filters can't Starts to work instantly to protect your engine from metal contaminates. Keeps oil cleaner longer. Reduces engine wear up to 70%. Snaps magnetically to the outside of any disposable oil filter canister�no tools needed. Extends engine's life, increases its performance and reduces emissions. Designed to improve existing oil filter. An easy, inexpensive way to protect your engine from the performance-robbing wear and damage caused by metal particles circulating in engine oil. Patented FilterMag� system uses a series of ultra-powerful neodymium magnets to focus magnetic energy into oil filter (just like a laser focuses light) to trap metal particles against the inside filter wall. The power of the magnetic force is so great it can pull and hold even microscopic and hard-to-trap steel contaminates out of the oil flow. Cleanable, reusable, transferable from filter to filter. Applications: All Makes All Models, All Makes All Models

DRILLED AND SLOTTED PERFORMANCE BRAKE ROTORS Maximum air circulation for increased cooling and reduced fade Precision drilled and chamfered for faster initial braking Slots help keep rotor surface free of pad residue and contaminants for less dusting and longer rotor life. Dramatically improve wet-weather braking. Strong one-piece design maximizes structural integrity to meet the demands of off-road driving performance. Applications:1995-1999 Chevrolet Monte Carlo REAR

CUSTOM-FIT ROAD VISION� SPORT MIRRORS High-impact ABS plastic housing Housing finish and unusual glass tint�perfect combination of looks and function Breakaway design helps prevent vehicle damage Bolt on easily in place of factory mirrors. Manual adjustments. Housing looks great as is or can be painted to match or contrast vehicle color. Approximate glass size: 5"W x 4"H (compact trucks); 7-1/2"W x 5-1/2"H (full-size trucks). Sold in pairs. Applications:1998-2000 Ford Ranger

CUSTOM-FIT STAINLESS STEEL DOOR EDGE GUARDS Save 20% on Select Items! Dress-up accents protect door edges against chips, nicks and scratches Choose polished finish or durable, bonded-on black PVC finish Fit beautifully and won't sag or slip like universal edge guards. SAE 51434 stainless steel guards won't rust or corrode. Install in minutes. Hold tight without drilling or glue. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1999-2000 Ford F-Series Pickup Super-duty 4-dr. Crew Cab

REAR HANDLING/RIDE STABILIZER Transverse ride-control spring reduces lean/sway on both sides of your SUV at the same time Big handling improvements at a very small price! Acts as a helper spring when SUV is loaded or towing Works continuously to restore the "neutral" position. It supports the side that is leaning while "pulling down" the opposite side that is rising. Hot-formed steel for strength and lasting service. Complete with all mounting hardware. Applications:2002-2003 Mercury Mountaineer,2002-2003 Mercury Mountaineer

CUSTOM-FIT POWER WINDOW KIT AND DOOR SWITCHES Designed for trouble-free installation, solid fit, dependable service and a great look! Easy do-it-yourself installation! OE quality from an ISO 9002 certified manufacturer and OE supplier of power window systems for European luxury sports cars! Add power to your front windows! Heavy-duty regulator is a direct replacement for manual window regulator�bolts to 3 or 4 mounting points. Installation takes less than 2 hours�no modifications required, only 2 wires to hook up. Fast, quiet, reliable electrical motors carry manufacturer's limited lifetime warranty. Instructions included. For front doors ONLY. Door switches (not included) sold separately. Sold in pairs. Applications:1983-1993 GMC Sonoma,1984-1993 Chevrolet S10 Blazer,1984-1993 GMC S-15 Jimmy,1983-1993 Chevrolet S10 Pickup,1983-1993 GMC S-15 Pickup

SHORTY HELMETS Save 30%! Aerodynamic one-piece hand-laminated multilayer fiberglass outer shell with cutaway sides to prevent that "closed-in" feeling! Refer to HELMET SIZING CHART C (see below) A contoured-to-fit one-piece expanded polystyrene inner shell with cushiony foam padding Everything you want in a helmet�balance, light weight, toughness�looks! Deluxe liner (described below) plus the venting system make these one of the most comfortable helmets you've ever worn! Black fingertip-adjustable, dual-port, dual-slide forehead vents permit refreshing flow-through ventilation and speed up moisture/perspiration evaporation. Open-ear nylon chin-strap retention system promotes unimpaired hearing. Deluxe wraparound neck/ear storm curtain is fully padded, extra thick and features a soft black cotton/polyester liner (matches interior liner) plus a soft-touch leather-look black vinyl outer cover for more styling. Curtain zips on/off as needed. Easy soap/water cleanup. 3-snap front and black peak bubble visor with black-finished snaps (finish conceals snaps). Black nylon chin strap with metal "D" ring. Wraparound black rubber composite trim. Meet or exceed DOT specifications. DELUXE TAILORED-FIT LINER! Full-surround lining. Custom designed of a special black 60% cotton/40% polyester blend. Dual textures! Breathable mesh lining that wraps around the outer bottom edge. When forehead vents are open, this lining allows more air to be pulled up into the helmet for increased air circulation and added warm-weather comfort. Soft, solid lining around the sides of helmet and on the specially padded crown. Darts sewn throughout this lining guarantee one of the best fits possible�very snug yet very comfortable! IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models, All Makes All Models

ILLUMINA ADJUSTABLE PERFORMANCE STRUT 5-position externally adjustable from soft to maximum control with just the turn of a screwdriver Lets you fine-tune your suspension to your riding style and changing road conditions Unlike the competition that simply changes rebound damping, this strut uses a calibrated bypass/shutter valve system that changes both rebound and compression damping SIMULTANEOUSLY! Tokico�the undisputed leader in overall performance and adjustment ease�offers the ultimate strut for everything from daily driving to autocross to drag racing! Adjustments are more consistent and more precise than other struts. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1990-1996 Nissan 300ZX

CUSTOM-FIT WEATHER STRIPPING & RUBBER PARTS Save 20% on Selected Items! Meet or exceed OEM standards High-quality molded and/or extruded rubber parts with all correct shapes, bends and contours Replace originals perfectly. Help restore original look and end water leaks, whistling and rattles caused by worn or damaged weather strip, seals and grommets. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1969 Ford Mustang Coupe & Convertible

PERFORMANCE LONG-TUBE HEADERS Reduce back pressure Help engine "breathe" better to increase power and gas mileage Great for better performance and faster acceleration in older vehicles. Self-scavenging 4-tube headers allow smoother flow of exhaust gases. Individually tuned for optimum balance of engine's intake/exhaust system. Large 2-1/2" or 3" diameter collector bolts directly to oversized 2-1/4" extension pipes. Check local emission laws before ordering. NOTE: Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use. (A) Air conditioner bracket required. (B) Pre-1970 vehicle with exhaust-manifold-mounted alternator must use bracket (sold separately). (C) Will not fit with power takeoff or high torque starter. (D) Will not fit with manual transmission. (E) Will not fit with air pump. (F) Will not fit automatic floor transmission. (G) Standard transmission may require clutch linkage modifications. Applications:1971-1974 Chevrolet Impala 396 thru 454 engine; 1-3/4" x 3",1971-1974 Chevrolet Delray 396 thru 454 engine; 1-3/4" x 3",1971-1974 Chevrolet Caprice 396 thru 454 engine; 1-3/4" x 3",1964-1974 Chevrolet El Camino 396 thru 454 engine; 1-3/4" x 3",1964-1974 Chevrolet Malibu 396 thru 454 engine; 1-3/4" x 3",1971-1974 Chevrolet Biscayne 396 thru 454 engine; 1-3/4" x 3",1964-1974 Chevrolet Chevelle 396 thru 454 engine; 1-3/4" x 3",1970-1972 Chevrolet Camaro 396 thru 454 engine; 1-3/4" x 3"

HI-6S MULTI-SPARK IGNITION Save 20% Selected Items ! Up to 70% more spark energy than stock for dependable power! Maximum output up to 8,000 RPM for up to 9.5:1 compression ratio Soft urethane encapsulation seals out moisture, dirt, dust and protects against heat and vibration Built-in rev limiter is adjustable from 3,100 to 9,900 RPM in 100-RPM increments. 50-state legal (CARB EO #D-225-59). For computer-controlled 4-, 6- and 8-cylinder trucks with distributor and without vacuum advance. Not for distributorless systems. Triggers from stock electronic ignition. Ideal complement for Crane Cams� PS91 ignition coil (sold separately). Order harness (sold separately) for easy plug-in installation to stock harness. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1986-2001 GMC All Models Trucks with Engine-control Computer,1986-2001 Chevrolet All Models Trucks with Engine-control Computer, GMC All Models Trucks with Coil-in-cap HEI & 7-pin Distributor Module (vacuum advance), Chevrolet All Models Trucks with Coil-in-cap HEI & 7-pin Distributor Module (vacuum advance)

REPLACEMENT GAS TANK STRAPS Hard-to-find straps replace old, rusted or broken originals perfectly A must for a safe, secure tank installation Strong galvanized steel with direct-fit attachment Sold individually and in pairs (depending on application). Will not fit extra-capacity aftermarket tanks. Applications:1966-1976 Ford Bronco - Full Size (Auxialiary Tank)

SUSPENSION LIFT KITS Allow more wheel travel and space for larger tires Raise vehicle's height up to 4" for increased ground clearance, better protection and control off-road as well as more comfort on the highway Stand up to conditions that cause stock suspensions to fail. Include everything needed to complete the lift, except shocks. Major heavy-duty components in each kit vary by application. Complete new and improved suspension package with Heckethorn shocks and steering stabilizers (all sold separately), designed to enhance the performance characteristics of these Rough Country� suspension kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1976-1986 Jeep CJ5 4",1976-1986 Jeep CJ6 4",1976-1986 Jeep CJ7 4",1976-1986 Jeep Scrambler 4"

CONNECTING ROD AND MAIN BEARINGS Replacement and performance engine parts for Volkswagens Applications:1959-1972 Volkswagen Transporter (Std.),1960-1979 Volkswagen All Models 40; 50; 53; 57; 60 HP cars; (Std.)

GAS TANKS Tank accessories sold separately Reinforced heavy-gauge steel with electronically welded seams. Sending units not included. Applications: Jeep CJ2A 11-gallon under-front-seat mount - steel, Jeep CJ3A 11-gallon under-front-seat mount - steel, Jeep CJ3B 11-gallon under-front-seat mount - steel, Jeep CJ2A 11-gallon under-front-seat mount - steel, Jeep CJ3A 11-gallon under-front-seat mount - steel, Jeep CJ3B 11-gallon under-front-seat mount - steel

ROUND-TUBE SIDE RAILS Protect rails while adding handy tie-down points 2 finishes available For pickups Smooth one-pc. 1-7/8" diameter 16-gauge steel tubing. Easy to install. Some drilling required. Hardware and instructions included. Sold in pairs. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: Chevrolet C/K Pickup with 6-ft. Bed; Rails 65" Long, Chevrolet S10 Pickup with 6-ft. Bed; Rails 65" Long, Chevrolet LUV Pickup with 6-ft. Bed; Rails 65" Long, Dodge Power Wagon with 6-ft. Bed; Rails 65" Long, Dodge Dakota with 6-ft. Bed; Rails 65" Long, Dodge D50 Pickup with 6-ft. Bed; Rails 65" Long, Dodge Mini Ram with 6-ft. Bed; Rails 65" Long, Dodge Ram 50 with 6-ft. Bed; Rails 65" Long, Ford F-Series Pickup with 6-ft. Bed; Rails 65" Long, Ford Ranger with 6-ft. Bed; Rails 65" Long, Ford Courier with 6-ft. Bed; Rails 65" Long, Jeep Comanche with 6-ft. Bed; Rails 65" Long, Jeep J Series Pickup with 6-ft. Bed; Rails 65" Long, Isuzu Pickup with 6-ft. Bed; Rails 65" Long, Mazda Pickup with 6-ft. Bed; Rails 65" Long, Mitsubishi Pickup with 6-ft. Bed; Rails 65" Long, Nissan Frontier with 6-ft. Bed; Rails 65" Long, Nissan L520 with 6-ft. Bed; Rails 65" Long, Nissan L521 with 6-ft. Bed; Rails 65" Long, Nissan Pickup with 6-ft. Bed; Rails 65" Long, Plymouth Scamp with 6-ft. Bed; Rails 65" Long, Toyota T100 with 6-ft. Bed; Rails 65" Long, Toyota Tacoma with 6-ft. Bed; Rails 65" Long, Toyota Tundra with 6-ft. Bed; Rails 65" Long, Toyota Pickup with 6-ft. Bed; Rails 65" Long, Subaru Brat with 6-ft. Bed; Rails 65" Long, GMC Sierra with 6-ft. Bed; Rails 65" Long, GMC C/K Pickup with 6-ft. Bed; Rails 65" Long, Chevrolet C/K Pickup with 6-ft. Bed; Rails 65" Long, Chevrolet S10 Pickup with 6-ft. Bed; Rails 65" Long, Chevrolet LUV Pickup with 6-ft. Bed; Rails 65" Long, Dodge Power Wagon with 6-ft. Bed; Rails 65" Long, Dodge Dakota with 6-ft. Bed; Rails 65" Long, Dodge D50 Pickup with 6-ft. Bed; Rails 65" Long, Dodge Mini Ram with 6-ft. Bed; Rails 65" Long, Dodge Ram 50 with 6-ft. Bed; Rails 65" Long, Ford F-Series Pickup with 6-ft. Bed; Rails 65" Long, Ford Ranger with 6-ft. Bed; Rails 65" Long, Ford Courier with 6-ft. Bed; Rails 65" Long, Jeep Comanche with 6-ft. Bed; Rails 65" Long, Jeep J Series Pickup with 6-ft. Bed; Rails 65" Long, Isuzu Pickup with 6-ft. Bed; Rails 65" Long, Mazda Pickup with 6-ft. Bed; Rails 65" Long, Mitsubishi Pickup with 6-ft. Bed; Rails 65" Long, Nissan Frontier with 6-ft. Bed; Rails 65" Long, Nissan L520 with 6-ft. Bed; Rails 65" Long, Nissan L521 with 6-ft. Bed; Rails 65" Long, Nissan Pickup with 6-ft. Bed; Rails 65" Long, Plymouth Scamp with 6-ft. Bed; Rails 65" Long, Toyota T100 with 6-ft. Bed; Rails 65" Long, Toyota Tacoma with 6-ft. Bed; Rails 65" Long, Toyota Tundra with 6-ft. Bed; Rails 65" Long, Toyota Pickup with 6-ft. Bed; Rails 65" Long, Subaru Brat with 6-ft. Bed; Rails 65" Long, GMC S-15 Pickup with 6-ft. Bed; Rails 65" Long, GMC Sierra with 6-ft. Bed; Rails 65" Long,

SLAM AIR AIR ADJUSTABLE SPRINGS Towing and hauling with a lowered truck doesn't have to result in a bad ride Springs adapt lowered truck's rear leaf suspension system to provide an adjustable spring rate for ride comfort and variable load requirements Designed specifically for lowered trucks with 2" to 6" drop, including trucks with flipped axles and notched frames. Easy to install. Brackets included to fit Bell Tech� C-sections plus hardware and detailed instructions. Use service station air hose to inflate springs or order an on-board air supply system (sold separately). Never exceed manufacturer's recommended gross vehicle rating. Sold in pairs. Applications:1973-2001 Chevrolet C/K Pickup C10 and C1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1987-2001 Dodge Dakota 2WD,1970-2001 Ford F-Series Pickup F150 2WD,1973-2001 GMC C/K Pickup 1500 2WD with 2"; 2-1/2"; 3"; 3-1/2"; or 4" springs,1969-2001 Dodge Pickup - Full Size D100; D150; and Ram 1500 2WD,1982-1998 Ford Ranger 2WD

EMERGENCY BRAKE SPRING Will not fit M38A1 models Applications:1941-1945 Jeep MB,1950-1951 Jeep M38,1945-1949 Jeep CJ2A,1948-1953 Jeep CJ3A,1953-1964 Jeep CJ3B,1968-1971 Jeep CJ5,1968-1971 Jeep CJ6

ECONOMY SUSPENSION SYSTEM KIT Lifts vehicle up to 2" Includes Nitro 9000 Gas Shocks Kit will not change ride quality. Nitro 9000 top performance gas shocks are built tough to survive the worst off-road punishment. And with radial-tuned, velocity-sensitive valving plus the urethane bushings they provide the smoothest highway ride possible. Huge 1-3/8" piston, nitrogen gas pressurized up to 200 psi, big fluid reservoir. Fits '55-02 Jeep� vehicles with stock height through 4" lift. Kit cannot be shipped express. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Suspension Kit for '41-86 CJs and '87-95 Wranglers: Includes front and rear add-a-leaf springs, steering stabilizer with yellow boot plus 4 Nitro 9000 shocks with yellow boots. Suspension Kit for '97-02 Wranglers: Includes 4 coil spring mount relocators, urethane bump stops, 4 Nitro 9000 shocks with yellow boots, hardware and instructions. Applications:1997-2002 Jeep Wrangler,1997-2002 Jeep Wrangler

BILLET ALUMINUM PEDAL COVER SET Show-quality polished billet aluminum No-drill bolt-on installation on factory foot pedals Great cover-ups! Put your foot down to dull, boring interiors with these striking pedal covers! 3-piece automatic transmission set includes cover for accelerator, brake and emergency brake pedals; 4-piece manual transmission set also includes clutch pedal cover. Applications:1992-2001 GMC Yukon with Manual Transmission,1985-1999 GMC Suburban with Manual Transmission,1985-1991 GMC Jimmy - Full Size with Manual Transmission,1985-2001 GMC C/K Pickup with Manual Transmission,1985-1996 Ford Bronco - Full Size with Manual Transmission,1985-2001 Ford F-Series Pickup with Manual Transmission,1985-1993 Dodge Ramcharger with Manual Transmission,1985-2001 Dodge Pickup - Full Size with Manual Transmission,1995-2001 Chevrolet Tahoe with Manual Transmission,1985-2001 Chevrolet Suburban with Manual Transmission,1985-1994 Chevrolet Blazer - Full Size with Manual Transmission,1985-2001 Chevrolet C/K Pickup with Manual Transmission

STICK-ON BUMPER PROTECTORS Great for pickup and sport utility vehicles Protect your bumpers from dings, dents and scratches Tough, impact-resistant black PVC protectors with smooth satin finish can be easily trimmed to fit. "V" notch design allows protector to flex to conform to your bumper's contours. Extend approx. 3/4" from mounting surface. Pair for right and left sides. Applications: All Makes All Models

BUMPER DIFFUSERS Target the airflow up and way from your bumper Using the bendable mounting plate as a template, cut the diffuser for a custom fit Install easily with included pop rivets Black powder-coated aluminum. Sold in pairs. Applications: All Makes All Models, All Makes All Models

EXTREME 9000 HEAT-REFLECTIVE WIRE SET The perfect solution to the intense heat in today's cramped engine compartments! Custom-fit set features 8mm gloss black double-silicone wires Silver heat-reflective shield bonded to spark plug boots 500 ohms/ft. ferro-spiral core for ultimate performance. TBI=Throttle Body Injection. SFI=Sequential fuel Injection. Applications:1996-1999 GMC Suburban Vortec with SFI; 350 (5.7L;R),1996-1999 Chevrolet Tahoe Vortec with SFI; 350 (5.7L;R),1996-1999 Chevrolet Suburban Vortec with SFI; 350 (5.7L;R),1999-2002 GMC Sierra 1500-2500 with Gen III LSI Vortec; 4.8L; 5.3L;6.0L,1999-2002 Chevrolet Silverado 1500-2500 with Gen III LSI Vortec; 4.8L; 5.3L;6.0L,1996-1998 GMC C/K Pickup 1500-2500 Vortec with SFI; 305 (5.0L M); 350 (5.7L R),1996-1998 Chevrolet C/K Pickup 1500-2500 Vortec with SFI; 305 (5.0L M); 350 (5.7L R)

SUSPENSION SYSTEM KITS Save 30%! All components are designed to work together to ensure the best performance possible! "Get it dropped right the first time" for a radical new look plus improved performance! Choose the suspension kit that's just right for your vehicle! Kits drop front 1.8", rear 1.8". (A) Kits drop front 2.0", rear 2.0". (B) Kits drop front 1.5", rear 1.5". Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1989-1991 Honda Civic (exc. Station Wagon)

CUSTOM-FIT CARPETING SETS Matching tailgate carpeting sold separately Detailed with sewn-in contours for a perfect fit You can't go wrong with these fabrics and textures! Exposed edges are protected/strengthened with reinforced binding. Padding adds a comfortable feel underfoot and insulates against noise and vibration. Color-matched/coordinated driver's heel pad protects a high-wear area. Front compartment carpeting covers main floor and areas adjacent to and under front seat(s). Complete interior carpeting covers main floor areas adjacent to and under seat(s), cargo area, left and right rear wheel housings. Nylon plush-cut pile carpets come with mat-resistant 1/4" thick polyfoam padding; nylon and polypropylene loop carpets come with thick, mildew-resistant synthetic padding. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like. (A) Front compartment carpet covers only from firewall to front of seat. Applications:1984-1993 Jeep Cherokee,1984-1991 Jeep Grand Wagoneer,1978-1990 Jeep Wagoneer,1984-1993 Jeep Cherokee,1984-1991 Jeep Grand Wagoneer,1978-1990 Jeep Wagoneer

ALUMINUM FLYWHEEL Save 20%! CNC machined from 6061-T6 billet aluminum Ensures faster acceleration in low gears Super-precise tolerances to .001". Reduced weight for more horsepower (15 to 30 hp boost on average). Weighs 6 to 13 lbs. vs. the 14 to 34 lbs. for conventional flywheels. Ultra-light weight means energy used to turn heavy stock steel flywheel is used to turn your drive wheels. Reduced mass also allows engine to rev faster and gets you into power band quicker. Incorporates a specially treated steel friction insert for the contact surface. Insert is replaceable and far stronger than the contact surface on a stock cast iron flywheel. Ring gears are heated, then cooled to shrink in place and finally pinned so they will never slip or fly off. Perfect matches for Kevlar� clutches (sold separately). Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. (A) Counterweight not included. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1995-2000 Volkswagen Golf/Golf GTI GTI,1994-2000 Volkswagen Jetta 2.8L VR6

OFF-ROAD VENTED FULL-FACE HELMET Save 30% on Selected Items! Injection-molded polycarbonate is specially modified to survive off-road rough-and-tumble Refer to HELMET SIZING CHART A (see below) Lightweight, aerodynamic design is easy to wear Allows comfortable use of goggles. One-piece polycarbonate outer shell is penetration resistant and impact absorbent. Contoured one-piece polystyrene inner shell with foam padding (extra padding in cheek area). Sanded-smooth outer shell is painted with glossy DuPont� paint, then clear coated for scratch protection. Soft perforated brushed black nylon lining is moisture resistant. Includes black nylon chin strap with "D" rings. Easy soap and water cleanups. Meets or exceeds DOT specifications. Bolt-on visor stays on. Strong built-in chin bar. No-sweat vent system: padded/lined chin bar features an insert with 5 openings plus molded-in side vents and fingertip-adjustable forehead vents under visor. Large window ensures unimpaired peripheral vision�plates on the sides "grab" straps on goggles to prevent slipping. Aerodynamic plastic visor has 2 vents and one scoop on each side to channel airflow and minimize lift�matches helmet color and/or graphics. Replacement visor sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models

GEL GRIPS Comfort design and Memoflex� gel relieve hand fatigue and absorb shocks Superior to OE grips! Attach easily to any standard 7/8" handlebar Black on gray color. Sold in pairs. Applications: All Makes All Models, All Makes All Models, All Makes All Models

HOIST-A-TOP� KITS Now one person can safely remove, store and replace any hardtop in minutes The only system that lifts and stores top in up position Uses a sturdy steel frame, steel (not rope) cables and special lift mechanism Hoist-a-Top� is a complete turnkey system. Easy to install and use. Simply attach the super-strong steel frame to your top using the no-mar rubber-coated hooks. Special cable-pulling mechanism lifts top to the ceiling for out-of-the-way storage. The 7-ft. to 10-ft. working range allows Hoist-a-Top� to handle top removal and storage in most garages and carports. Top stores in the lifted position. No drilling�no pulled muscles, strained back or dropped/damaged top. Works with all one-piece and 2-piece hardtops. Detailed instructions and foam-covered hardware included. Applications: Jeep All Models, Jeep All Models, Jeep All Models

FRONT AND REAR FLOOR MATS Save 33% on Select Item! Personalized protection for your truck's carpeting Mats available plain or with graphic For trucks or SUVs How would you like to have Tweety as a traveling companion? Or Yosemite Sam? You can with our floor mats. Choose your favorite character or slogan. Black rubberized vinyl and deep waffle design traps dirt. Multicolored center graphic is molded in, so it won't wear or tear off. Nonslip backing. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models

CHROMED STEEL LOUVERED AIR CLEANER Choose from 2 custom-fit carburetor sizes Replacement filter element sold separately For '54-74 Volkswagen Beetles, Super Beetles and Transporters Increases airflow for improved performance. Washable foam element. Compact�approx. 5-1/2"W x 2-7/8"H overall. 2"H cover has eleven 4-louver rows. Offset base, smog tube and clamp-style mount. Check local emission laws before ordering. NOTE: Not legal for sale or use on California pollution-controlled motor vehicles. This product is intended for off-road or racing use only and is not intended or applicable for highway use. Applications:1954-1974 Volkswagen Beetle - Air Cooled (for OE 1-bbl. Solex carb w/2-1/16" neck),1954-1974 Volkswagen Super Beetle (for OE 1-bbl. Solex carb w/2-1/16" neck),1954-1974 Volkswagen Transporter (for OE 1-bbl. Solex carb w/2-1/16" neck)

MONOMAX� PERFORMANCE GAS SHOCKS Save 20%! Huge 46mm bore, floating piston and mono-tube design eliminate fade much better than other shocks Chrome-plated hardened 1/2" diameter piston rods Engineered with top features to outperform conventional shocks. Seamless cylinders and eye rings for greater strength and durability. Self-sealing packing for longer, more dependable service. Auto-adapt valving for the best ride control possible. Reduce squat under acceleration. Eliminate braking nose dive. Control roll and pitch. Velocity-sensitive valving adjusts automatically ensuring a great ride no matter what the road conditions. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1998-2000 Nissan Frontier 2WD,1998-2000 Nissan Frontier 2WD

DROP-DOWN PITMAN ARM Prevents steering bind caused by out-of-plane steering arm angle A must for vehicles lifted 3" to 6" Fits power steering only. Applications:1978-1979 Ford Bronco - Full Size,1978-1979 Ford F-Series Pickup F100; F150

RS5000� HIGH-PERFORMANCE SHOCK 10-stage velocity-sensitive valving blends on-road comfort and off-road control Expanded design increases fluid capacity while greatly reducing internal temperatures Provides exceptional performance on either stock or lifted light trucks and SUVs Additional features: double-welded mount; twin-tube cellular gas design; ball sized and burnished DOM pressure tube with double-wall construction; 1-3/8" diameter full displacement piston with glass-filled Teflon� piston seal; internal rebound bumper; 5/8" diameter hardened, double-chromed rod; 240-hour salt spray-resistant exterior finish; tough, resilient accordion-pleated red rubber shock boot (included) provides all-weather protection against dirt and grime. Shock is available for most 2- or 4-wheel drive domestic or imported light trucks and SUVs with stock or lifted suspensions (up to 4" maximum, depending on application). Limited lifetime warranty. Applications:1986-1997 Ford Aerostar 2WD; Lifted Height: 0"

CUSTOMIZED HOOD EMBLEM Here's just another way to prove how proud you are of your car! Original-equipment emblem helps your car stand out from the crowd Self-adhesive backing makes it easy to attach emblem almost anywhere Applications: All Makes All Models

ENGINE MANAGEMENT SYSTEM Plugs directly into your car's factory ECU harness and sensors Windows�-based software (2000, NT, 98, 95, ME) makes copying, viewing and manipulating data as easy as clicking a mouse User-defined templates are easy to configure and let you establish "quick keys" to any vital information during the tuning process Plug and play system installs in minutes and requires no additional wiring. Revolutionary! Forever changes the way fuel injection is tuned! Infinitely-adjustable software lets you program virtually any combination of engine control, power adders or auxiliary devices and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition. Other features include: onboard data logging; sequential fuel injection; nitrous, boost and knock control. System also includes base maps and user-friendly manual. Made in USA. System is legal in California for off-road use only. Applications:2000-2002 Honda Accord 6-cyl.

NEON UNDER-CAR LIGHT KITS High-tech styling for today's vehicles These neon tubes put on a dazzling light show that will make your vehicle look like it's floating on a cloud of color. 4-tube kit includes two 4-ft. tubes and two 3-ft. tubes. Beautiful in daylight, incomparable at night. Long-lasting neon is sealed in a waterproof, high-impact optical-grade acrylic tube for maximum glow and durability. Low amp draw (approx. 400 mA) for safety. Preconnected high-voltage cables for greater safety and easier installation. Includes mounting bracket(s), hardware, switch(es) and wiring. For 12-volt negative-ground system. To add movement to your lights, order sound converter (sold separately; SKU# 47ZX2368U). Note: Check local laws regarding legality of neon lights before ordering. For installation instructions, copy and paste the following Street Glow� URL into your browser: http://streetglow.com/site/manuals/AN100.pdf Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

Manufacturer: Mastercool Inc.
SKU: 07ZX2207B

ALIGNMENT BRACKETS Trouble aligning your lifted truck? These brackets are the perfect solution! Restore your 1.5" to 2.5" lifted truck to the proper geometry by dropping the passenger's and driver's side axles Camber-adjustment bolts to ensure precise alignment included Sold in pairs. Applications:1997 Ford F-Series Pickup F250,1997 Ford F-Series Pickup F250

CUSTOM-FIT SIDESTEPS STEP RAILS Full-length design with compressed (not cut-out) step areas and no-slip black composite step inserts including one in rear for maximum convenience Unique modular wheel-well-to-wheel-well rails that can be shipped UPS! No truck-freight costs and delays! Modular design simplifies installation, reduces stress on rails (as pickup/bed flex over rough roads) and lowers shipping costs A bold, new styling statement for your pickup and safer, easier entry/exit for you! Big 3" diameter tubing, mandrel bent to prevent wrinkles. Advanced no-drill bolt-on mounting system. Limited 5-year warranty. Sold in pairs. Applications:2001-2003 Chevrolet C/K Pickup 2500HD ext. cab; long-bed,2001-2003 GMC C/K Pickup 2500HD ext. cab; long-bed

REPLACEMENT ELECTRICAL PARTS Original-style replacements for old, damaged or malfunctioning parts Applications:1976-1983 Jeep CJ5,1976-1986 Jeep CJ7,1981-1985 Jeep Scrambler,1987-1994 Jeep Wrangler YJ

KWICK TOP KITS� Secure or remove your top in less than 3 minutes! Fingertop release�simply flick the patented latches and twist the quick-release knobs to release top No more loose screws, searching for bolts and lots of wasted time Easy to install with common tools. Once installed, no tools are required to remove or secure top. Latches ensure a tighter, better seal. Applications: Jeep CJ2A, Jeep CJ3A, Jeep CJ3B, Jeep CJ5, Jeep CJ6, Jeep CJ7, Jeep Wrangler YJ

4" LIFT KIT Retains factory ride quality, and steering geometry and CV axle angles Includes new rear springs Especially for 4WDs! New nodular iron spindles incorporate a raised ball joint boss to eliminate need to replace upper control arm. Front anti-sway bar links are extra long to maintain factory bar geometry. Full-width differential/control arm cross members for lateral rigidity. With front and rear Superide shocks with yellow boots. Front drive shaft (SKU# 48ZX8522RF) and front skid plate (SKU# 48ZX7483NF) sold separately. Shipped separately from factory in multiple cartons. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:2001 Ford Explorer Sport Trac 4WD

CUSTOM-FIT OE-STYLE SPLASH GUARDS Custom molded to fit your truck perfectly! Contoured to match truck's lines Black thermal plastic won't crack or fade...remains flexible even in the coldest weather Protect your truck's finish against dirt, stone, tar without spending a lot! These guards look great and they keep your truck looking great for years. Approx. 10" x 15". Install easily. Hardware included. Drilling required. Applications:1988-1998 Chevrolet C/K Pickup Front & Rear, Chevrolet S10 Blazer Front & Rear,1997-2000 Chevrolet S10 Pickup Front & Rear,1994-1996 Chevrolet S10 Pickup without OE Flares Front & Rear,1995-2001 Chevrolet Tahoe without OE running boards Front & Rear,1998-2000 Dodge Dakota Front & Rear,1996-2001 Dodge Pickup - Full Size Ram 1500; 2500 Front & Rear,1995-2001 Dodge Van - Full Size Ram; Front & Rear,1987-1993 Ford F-Series Pickup Front & Rear,1999-2001 Chevrolet Silverado Front & Rear

2" ADD-A-LEAF KIT Recommended for use with a snow plow Adds overall 1-1/2" to 2" lift�exact lift will vary, depending on engine size and accessories. Kit includes 2 leaf springs for front or rear and center bolts. (Can also use lift kit on rear.) Add-a-leafs not intended for use with other devices to lift vehicles. Note: Longer shocks recommended, but not required. Applications:1983-1999 Ford Ranger,1983-1999 Ford Bronco II,1983-1999 Ford Ranger,1983-1999 Ford Bronco II

CLASS V BALL MOUNT Fits 2" Class IV or Class V receivers 12,000-lb. gross weight capacity, 1,200-lb. tongue weight Tough black finish 3"W x 3/4" thick ball-mounting plate and 1-1/4" ball-mount hole (ball sold separately). Double-thick wall 2" square shank. Applications: All Makes All Models

AIR-ADJUSTABLE HELPER SPRING KITS Improve handling and performance by adjusting vehicle to varying load conditions Adjustable to any load up to gross vehicle weight (GVW) Heavy-duty springs (bellows) install easily between axle and frame and work with existing suspension Springs are easily adjustable to improve handling or compensate for uneven loads�no loss of comfort or performance when vehicle is empty or lightly loaded. Use a service station air hose, hand pump or compressor kit (sold separately) to inflate/deflate springs. Virtually maintenance free. No moving parts. Kits include 2 springs, upper and lower mounting brackets, air fittings, air line, inflation valves, hardware and instructions. For rear except where noted. (A) Requires 7-1/2" clearance between frame and tire. (B) Sport-Rite� design for a superior ride. Fits stock or lowered trucks and lets you carry load up to vehicle's GVW. Applications:1992-1999 Chevrolet Suburban,1992-1999 GMC Suburban

PROTECTIVE LEATHER CASES FOR PORTABLE CELLULAR PHONES Save Up To 50% on Selected Items! Butter-soft black glove leather cases include belt clips. Accept standard or extended-life battery and have opening for plug-in eliminator/charger. Cases for Motorola�, NEC�, Nokia�, GE� and Ericisson� phones are available. Order by manufacturer and style number. Quantity is limited. Not all styles, sizes or colors shown may be available. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models, All Makes All Models

Manufacturer: Hornet
SKU: 81ZX6687P

FRONT STRUT AND REAR TIE BARS Eliminate flexing in front unibody and upper strut mounts for radically better handling and steering accuracy! Heavy-gauge aluminum bars with rigid steel mounts. Easy to install. Applications:1989-1994 Mitsubishi Eclipse

HEAVY-DUTY OIL PUMP Restores oil pressure�improves engine performance Brings back original oil pressure for higher pressure at idle and low speeds For most American vehicles Improves circulation throughout engine and cuts engine wear. Replaces original perfectly. Complete (less screen). Applications:1946-1973 Jeep CJ5 134 Civilian after engine #44417; high volume,1946-1973 Jeep CJ6 135 Civilian after engine #44417; high volume,1946-1973 Jeep Jeepster 136 Civilian after engine #44417; high volume,1946-1973 Jeep Universal 137 Civilian after engine #44417; high volume,1946-1973 Jeep Utility 138 Civilian after engine #44417; high volume,1946-1973 Jeep CJ5 134 Civilian after engine #44417; high volume,1946-1973 Jeep CJ6 135 Civilian after engine #44417; high volume,1946-1973 Jeep Jeepster 136 Civilian after engine #44417; high volume,1946-1973 Jeep Universal 137 Civilian after engine #44417; high volume,1946-1973 Jeep Utility 138 Civilian after engine #44417; high volume

WINDOW CHANNEL AND BELT WEATHER STRIPS Stop leaks Available in many sizes Duplicates of original sizes, shapes and construction Seal out weather, eliminate window rattles and enable window/window regulators to function properly. To receive a weather strip sample, call 1-800-529-4486. Applications: All Makes All Models

PROGRESSIVE-RATE HELPER SPRINGS Bolt easily on leaf springs�no welding or drilling Ensure a factory-smooth ride when vehicle is unloaded, yet support up to 2,500-lb. loads! Includes two 2-1/2" wide springs, all brackets and hardware, instructions. Note: Springs are designed to increase level-load carrying capacity. Never load vehicle beyond manufacturer's maximum gross vehicle weight rating. Adjustment only at time of installation. Due to specially shipping requirement, cannot ship UPS Next or 2nd Day. Applications:1972-1982 Chevrolet LUV Pickup,1982-1993 Chevrolet S10 Blazer,1998-1999 Dodge Durango,1972-1975 Jeep CJ6,1973-1982 Ford Courier,1987-1995 Isuzu Pickup,1987-1991 Isuzu Trooper,1972-1983 Jeep CJ5,1981-1986 Jeep Scrambler,1990-1995 Jeep Wrangler,1973-1983 Mazda Pickup B2000,1988-1990 Mitsubishi Montero,1968-1983 Nissan Pickup 4WD,1968-1986 Nissan Pickup 2WD (exc. Hardbody Models),1990-1993 Oldsmobile Bravada,1972-1983 Toyota Pickup 2WD,1984-1992 Toyota Pickup 2WD (exc. 1-ton Models),1993-1994 Toyota Pickup 2WD (exc. T100 1-ton),1995-1996 Toyota Tacoma,1997-2000 Toyota Tacoma 2WD,1993-1996 Toyota T100 4WD,1976-1986 Jeep CJ7,1982-1993 GMC S-15 Jimmy,1972-1982 Chevrolet LUV Pickup,1982-1993 Chevrolet S10 Blazer,1998-1999 Dodge Durango,1972-1975 Jeep CJ6,1973-1982 Ford Courier,1987-1995 Isuzu Pickup,1987-1991 Isuzu Trooper,1972-1983 Jeep CJ5,1981-1986 Jeep Scrambler,1990-1995 Jeep Wrangler,1973-1983 Mazda Pickup B2000,1988-1990 Mitsubishi Montero,1968-1983 Nissan Pickup 4WD,1968-1986 Nissan Pickup 2WD (exc. Hardbody Models),1990-1993 Oldsmobile Bravada,1972-1983 Toyota Pickup 2WD,1984-1992 Toyota Pickup 2WD (exc. 1-ton Models),1993-1994 Toyota Pickup 2WD (exc. T100 1-ton),1995-1996 Toyota Tacoma,1997-2000 Toyota Tacoma 2WD,1993-1996 Toyota T100 4WD,1976-1986 Jeep CJ7,1982-1993 GMC S-15 Jimmy

EZ CAM XR? CAMBER KIT Corrects the handling and ride of your lowered car! Reduces wear on expensive performance tires Easy-to-install kit allows ?1.75? of camber correction 2 bolts included. Applications:2000-2002 Ford Focus

ALUMINUM AIR INTAKE KITS AND COLD-AIR EXTENSION KITS Increase power and add a performance look Polished 6061 aluminum tubing is mandrel bent to fit your car perfectly The diameter of tubing is custom formed for each application, ensuring the best possible airflow NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1998-2001 Honda Accord (All V6 Models)

STICK-ON BUMPER PROTECTORS FOR ALL VEHICLES Dress up vehicle while protecting bumper and vehicle from scratches, dings and dents Great for new cars with painted bumpers and vehicles without impact strips or bumper guards Impact-resistant PVC conforms to bumper's contours. Sizes approximate. Applications: All Makes All Models

BLACK NEON TUBES Whites and fluorescents come alive! Long-lasting neon is sealed in a water-proof, high-impact Lexan? tube Install anywhere?inside or out! Mini 6", and 9", tubes have 3-ft. cord that plugs into a separate power transformer (included). 10", 15", and 20", tubes have built-in transformer. Transformer plugs into lighter socket or wires to 12-volt system (only 2 wires to hook up). Include brackets, hardware and instructions. Limited lifetime warranty. NOTE: Check local laws before ordering. Applications: All Makes All Models, All Makes All Models, All Makes All Models

IN-LINE CANISTER-STYLE ALUMINUM FUEL FILTER KITS Save 30%! Available for 1/4"ID or 5/16"ID fuel lines Choice of chrome-plated cast aluminum or anodized CNC-machined aluminum (in 5 glorious colors) Not only looks terrific, but also removes harmful particles of dirt, grime and other contaminants before they can damage your fuel system and engine Canister styling lets you unscrew knurled cap to remove, clean and reuse included porous brass filter element. Kits include 2 hose clamps. Order by fuel size. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications: All Makes All Models, All Makes All Models

© StoreDaily.com inc. Copyright 2008. All rights reserved. Blog