JSP ThunderTail Rear Wings @ Auto Parts & Accessories online store

JSP ThunderTail Rear Wings

THUNDERTAIL� REAR WING For trucks Mounts to bed rails or flat fiberglass tonneau cover to dress up truck's exterior Includes built-in 31" super-wide LED brake light The hottest new look for your sport truck! 9-1/2" tall wing made of fiberglass with gray primer finish can be painted to complement exterior color or designs. Drilling is required for installation. Mounting hardware and easy-to-follow instructions included. Note: Test wing prior to painting and installation for size, fit and possible obstructions (locks, latches, locking pins, etc.). To ensure the proper wing size, measure the width across the flattest area of the fiberglass cover (see diagram at left for measurements identified below). NOTE: SKU numbers ending in E are freight shipped from JC Whitney warehouse by truck/air freight. A: Outside edges of pedestals. B: Inside edges of pedestals. C: Bolt to bolt. D: Pedestal length. Applications: All Makes All Models, All Makes All Models

SHEET METAL BENDING BRAKES Choose 18", 30" or 40" model All-aluminum construction. Pre-drilled base mounts to your workbench (bolts not included). Includes instructions. Requires two 1" to 3"L "C" clamps (not included). Applications: All Makes All Models

CABLE TIRE CHAINS Install easily anywhere (no need to move or jack up vehicle) for superior traction on ice and snow Refer to TIRE SIZE CODE CHART (see below) for proper ordering Meet the limited clearance requirements of vehicles labeled SAE Class "S" in the owner's manual Safety designed for easier starts, faster stops and better traction! Part of the chain is in contact with the road at all times for superior take-hold traction�no gaps as with conventional chains. Offer better starts, stops and cornering traction than any other chain! Engineered for maximum wear, traction and riding comfort. Chains ride quieter and smoother than link chains. Ultra-strong aircraft cable is covered with carbon steel rollers. Sharp rotating roller edges bite deep into snow, ice and mud yet won't wear down sidewalls like link chains. Side cable/roller cable connector lies flat against tire�nothing to stick out and get caught on fender. Include a durable plastic storage case. Chains for light trucks incorporate extra-heavy-duty cable and larger rollers than chains for cars. Easy to handle. Weigh just 4 to 7 lbs. For FWD and RWD vehicles with radial and conventional tires. Sold in pairs. Applications: All Makes All Models

UPPER DOOR SLIDER KIT Toggle latch on each window for security D.O.T.-approved tempered glass Puts convenience of a sliding glass window in place of original zippered, roll-up vinyl window Fit into original-equipment lower steel half-doors. Made in USA. (A) Fits with factory-original soft top or Bestop� Replace-a-Top (51120 or 51123). (B) Fits factory-original soft top or Bestop� Replace-a-Top (51121); Supertop (51609); or Sunrider (51699). Applications:1998-2002 Jeep Wrangler

SOLARPRO PLUG'N'PLAY HIGH-POWER SOLAR BATTERY CHARGERS Use the sun's free energy to power your DC appliances Power appliances conventional low-wattage chargers can't�lights, refrigerators, TVs, VCRs, satellite dishes, microwaves, etc. Enjoy all the conveniences of home when you're on the go These chargers provide clean, quiet, dependable power anywhere the sun shines. Install in seconds and are maintenance free. Complete with everything you need: 7-amp charge controller; built-in LED display (indicates level of charge); all necessary wiring and mounting equipment. Weatherproof, rust/shock-resistant aluminum frame. Built-in discharge protection. Easily upgraded�additional panels (not included) can be added without any wiring. 21-amp charge controller (sold separately; SKU# 47ZX5516N) is recommended to prevent overcharge. Manufacturer's lifetime power warranty. Applications: All Makes All Models

KEVLAR? BELTED "V" RATED TIRES Withstand speeds up to 149 mph Aggressively designed for long tread wear, stability, top performance�and strength! Computer-designed and specially formulated matching front and rear tires 4-ply belt construction with 2 inner nylon cord belts and 2 outer Kevlar? belts for maximum strength. Special casing design minimizes expansion at higher speeds and promotes smooth corner-to-corner transitions for easier handling. Created for full-dress touring motorcycles but can be used on any street or sport cycle. Formulated of special compounds (using various top grades of rubber) for durability. Computer-designed directional treads for sure traction on wet and dry surfaces. Meet or exceed DOT highway specifications. Tubeless design, but may be used on tube-type rims with an inner tube and rim strip (sold separately). How To Order: Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. (MS) Metric sizes Tire Width in millimeters/Sidewall Height as a percent of tire width x Rim Diameter in inches. Applications: All Makes All Models, All Makes All Models

MESH REPLACEMENT WINDOW KIT Allows flow-through ventilation while you remain protected from the sun's rays and annoying insects Durable, waterproof color-matched windows zip in easily Kit replaces both rear side windows and rear window curtains and include color-matched fabric surrounds You'll be glad you have these windows during your hot-weather adventuring! They make the interior more livable when traveling, keep vehicle cooler when parked and keep pets from overheating on long trips. Fits only Bestop� Replace-A-Top�; will not match factory-original soft top. Applications:1999-2002 Jeep Wrangler TJ (with Bestop Replace-a-Top Models 51121; 51124),1999-2002 Jeep Wrangler TJ (with Bestop Replace-a-Top Models 51121; 51124)

4-COLOR NEON LIGHT ROD Adds constantly changing color anywhere! A single tube changes from yellow to pink to blue to green Built-in transformer, on/off switch and cigarette lighter plug included. Applications: All Makes All Models, All Makes All Models

PREMIUM (HIGH-PRESSURE) AND HEAVY-DUTY SHOCKS High-pressure nitrogen gas charge ensures superior handling, stability and control without loss of highway driving comfort! Gas charge allows the fastest and best response to the changing road conditions Performance engineered by Gabriel� to meet he individual driving requirements of your car! Highly pressurized gas resists compression and aids rebound to keep your tires in contract with the road. The pressure also reduces the fluid foaming that causes faulty dampening and fade. Exclusive Gabriel� velocity sensitive technology (VST) is instantly self-adjusting, resulting in faster reaction to the performance demands of your car. VST� included on all premium shocks (except where noted). VST� not equipped on heavy-duty shocks. All-weather fluid provides more consistent performance at temperature extremes�contains additives for extended service life. Rear shocks not available for models with self-leveling system. Limited lifetime warranty. Click on item SKU# for additional information. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1974-1978 Ford Mustang (Built from 11-05-73),1974-1978 Ford Mustang (Built from 11-05-73)

WHEEL COVERS - STAINLESS STEEL For Class "A" motor homes, RVs, campers and trucks Highly-polished stainless steel is rust and corrosion resistant Add custom sparkle & new life to wheels Expanding/locking ring mounts inside rim of wheel. Cover (with special retention system) bolts easily to ring using screws included. Includes mounting tools and detailed instructions. For all 17-1/2", 19-1/2" or 22-1/2" one-piece wheels including Budd type�not for split rims. Sold in pairs. Wheel size range from 17-1/2" to 22-1/2". Applications: All Makes All Models, All Makes All Models, All Makes All Models

CARPETED FLOOR MATS Great-looking protection with something to say! Extra-thick 18-oz. black nylon carpet�wear/stain resistant, ultra fade resistant Beautiful embossed fibergraphic print is designed to last the life of the mat Mats slip in easily and stay put�special nibbed vinyl backing prevents sliding and curling of edges. Edges are bound with no-ravel velour. Applications: All Makes All Models

ALUMINUM FLYWHEEL CNC-machined SFI-approved billet aluminum unit is very light and lets your engine rev quicker with complete safety Don't even think about using explosion-prone lightened factory units! Helps reduce turbo "lag" and improve rear wheel horsepower An investment in reliability! Applications:1989-2000 Honda Civic SOHC (exc. SI) 1.5L & 1.6L,1989-2000 Honda CRX SOHC (exc. SI) 1.5L & 1.6L,1989-2000 Honda Civic Del Sol SOHC (exc. SI) 1.5L & 1.6L

RAILGUARD� EXTRA-WIDE BED RAIL PROTECTORS Choose complete kit, side rail kit or tailgate kit Easy installation�no drilling required Easy-to-trim heavy-duty black vinyl with solid top and flexible side for easy contouring and the best fit. Lip wraps around inside of rail, installs with full-length adhesive backing. Lengths of rolls will vary depending on application. Complete Kit includes one 3-3/4"W roll for rails and tailgate and one 1-1/4"W roll for bulkhead. Side Rail Kit and Tailgate Kit include one 3-3/4"W roll. Applications: All Makes All Models, All Makes All Models, All Makes All Models

BLACK LEATHER BOLT-ON SADDLEBAGS Decorated with silver-colored metal conchos with leather lace Available in 2 sizes with a variety of accent trim (optional mounting kit sold separately) Custom-fit for Harley-Davidson Softail� and Fat Boy� models Saddlebags have thick black PVC plastic wheel-side backs for strength and shape retention. Box lid with 3-1/2"L wraparound sides and 3 straps. Bags bolt permanently to original rear fender or rear fender side support struts using existing hardware and mounting points�no drilling. Beautifully designed and crafted. Classic-styled bags provide secure extra space to safely carry gear. Black-dyed heavy-duty leather with reinforced seams/stress points for years of great looks and dependable service. Large top opening for easy access. Box lids or large flap closures secure with leather straps with nickel-plated roller-style buckles and "D" rings. Nickel-plated 5/16" flat-top rivet studs (with or without leather fringe). 5/8"W braided leather edging (with or without leather fringe). Sold in pairs. Note: Before ordering, measure space where bags will be mounted to ensure sufficient space and clearance. Optional Mounting Kit (sold separately) required for installation on modified ore replaced original fender. Applications:1986-1999 Harley-Davidson FXST Models FXST Softail,1986-1999 Harley-Davidson FLST Models FLST Heritage Softail

ONE-WIRE ALTERNATORS One-wire, direct-to-battery hook-up Choose 60-amp, high-output 80-amp or high-output 80-amp with chromed housing Install easily�simply mount alternator, attach belt and hook up to one 10-gauge wire (order separately). Bypass hard-to-find electrical problems that are caused by ignition switch, volt gauge, external voltage regulator. Rugged, dependable GM-type alternator has built-in current-monitoring voltage regulator to activate charging automatically whenever needed. Re-manufactured to exacting tolerances using new bearings, brushes, voltage regulator and diodes. Include single-groove pulley. Alternator for 6-volt systems replaces original generator�no need to alter remainder of original 6-volt electrical system. Fit all vehicles with OE 40- to 65-amp GM alternator without modification; mounting in other vehicles may require fabrication of mounting brackets. For negative-ground systems only. Applications: All Makes All Models

LEVELING SCISSORS JACKS 5,000-lb. lifting capacity per jack Permanent mount Rust-resistant heavy-duty steel Easy to operate using the chromed crank with speed handle. Rust-resistant, heavy-duty steel jacks extend from 4-3/4" (closed position) to 24-3/16". Tooth gears ensure straight-line vertical extension/retraction of scissor arms. Large (8" x 5") base plates provide steady support. 3" x 7" mounting plates can be attached to vehicle using large sheet metal screws (included) or can be bolted or welded to frame. Set includes 2 jacks and one crank. Order 2 sets to level/stabilize both front and rear of vehicle. Limited lifetime warranty. Applications: All Makes All Models, All Makes All Models

GENERATION II FUEL INJECTION PERFORMANCE KIT Maximum performance�more power, greater efficiency, increased torque and improved throttle response! Exclusive million mile warranty Superior filtering for consistent horsepower gains in all conditions! K&N� high-flow element and components replace restrictive factory air filter and allow 26% more airflow than stock. Dyno tests show torque increase of no less than 23 ft./lbs. through towing ranges. "Real world" tests on a Grand Cherokee resulted in 26.3 hp gains at rear wheels! Includes washable, reusable K&N� air filter. K&N� Million Mile Warranty: Warranted against defective materials or workmanship for one million miles or 10 years, whichever comes first. Applications:1999-2001 Toyota Tacoma 3.4L V6,1999-2001 Toyota 4Runner 3.4L V6

PREMIUM (HIGH-PRESSURE) AND HEAVY-DUTY SHOCKS High-pressure nitrogen gas charge ensures superior handling, stability and control without loss of highway driving comfort! Gas charge allows the fastest and best response to the changing road conditions Performance engineered by Gabriel� to meet he individual driving requirements of your car! Highly pressurized gas resists compression and aids rebound to keep your tires in contract with the road. The pressure also reduces the fluid foaming that causes faulty dampening and fade. Exclusive Gabriel� velocity sensitive technology (VST) is instantly self-adjusting, resulting in faster reaction to the performance demands of your car. VST� included on all premium shocks (except where noted). VST� not equipped on heavy-duty shocks. All-weather fluid provides more consistent performance at temperature extremes�contains additives for extended service life. Rear shocks not available for models with self-leveling system. Limited lifetime warranty. Click on item SKU# for additional information. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1974-1978 Ford Mustang (Built from 11-05-73)

HEAVYWEIGHT RUBBER MATS Save 20%! 100% virgin rubber is extra thick and puncture-proof Choose full-front or rear cargo area mat Ribbed surface provides sure footing and traps water and dirt, keeping cuffs and shoes clean. Full-front mats are molded to fit floor contours perfectly; rear mats available separately. Made of heavy-duty 100% virgin rubber to insulate, help muffle road noise and protect carpet. Stay securely in place and remain flexible even in cold temperatures. Ribbed heel pad. Black. Easy to clean with soap and water. Rear cargo area mat for '45-81 Jeep� Military/Civilian (excluding Gladiator and Wagoneer) available separately. Quantity is limited. Not all styles, sizes or colors shown may be available. Applications:1952-1962 Jeep Jeepster

CUSTOM-FIT AIR FILTER Ultimate performance! Superior to the competition in flow and filtration�dyno and flow bench tests prove it! Maintained properly, Kool Blue� filter maximizes airflow and increases horsepower over 1,000,000 miles Ultimate filtration! Test proven to protect engine against particles as small as 2.8 microns The only filter you'll ever need for your car! The ultimate in durability�designed to last the life of your engine! Filter incorporates high-quality surgical cotton gauze, sandwiched between layers of galvanized steel wire mesh. Blue epoxy coating on the mesh ensures the Kool Blue� will always look as good as it performs. Oil on the gauze acts as a barrier to stop even microscopic particles from entering engine. Dirt build-up actually becomes a part of the filter media to further increase filtration and extend filter's life. A used filter will outperform conventional new paper and foam filters! Completely washable and reuseable. Applications:1999-2001 Honda Accord 4-cyl.

SLIP-ON TWEED SEAT COVERS Add a layer of protection and a fresh new look to seats?without spending a lot Soft and comfortable year-round Stretch to fit easily and snugly over any standard high-back seat. Completely cover seats including front, back and sides. Machine washable. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1976-2003 Jeep CJ5,1976-2003 Jeep CJ7,1987-2003 Jeep Wrangler,1976-2003 Jeep CJ5,1976-2003 Jeep CJ7,1987-2003 Jeep Wrangler,1976-2003 Jeep CJ5,1976-2003 Jeep CJ7,1987-2003 Jeep Wrangler

CHROME-PLATED SADDLEBAG SUPPORTS Custom-fit/styled supports help keep throw-over saddlebags away from rear wheel, tire, swing arm and brake caliper Easy to mount�no drilling, cutting or welding required Help maintain clearance between saddlebag and rear wheel to protect both bike and saddlebag from damage Chromed 3/8" diameter steel supports are designed specifically for your bike. Welded-on and predrilled tabs allow easy installation to rear fender struts and/or rear turn signal mounts. Necessary hardware and instructions included. Sold in pairs. NOTE: This is a custom-fit item. The image shown is a representation of this item for a specific year, make and model. The item you receive may look somewhat different in order to accommodate your specific motorcycle. Applications:1996-2003 Honda Valkyrie Sub Model: GL1500,1996-2003 Honda Valkyrie Sub Model: GL1500

REPLACEMENT LIGHTING Direct replacements Each lamp comes with bulbs & original wiring connector Applications:1997-2002 Jeep Wrangler

THROW-OVER SADDLEBAGS Heavy-duty black-dyed full-grain leather with reinforced seams and stress points for years of reliable storage! Featuring an adjustable lace-together leather yoke for easy-over or under-seat mounting Remove effortlessly when you reach your destination Leather lace tie-downs on back wheel-side of bag help secure bag to bike. Accented with five 1-3/4" x 2-1/4" oval silver-colored metal conchos with leather backing panels and leather laces. Large box-lid top with 3-1/2"L 3-sided wraparound sides allows trouble-free access to contents. 3 leather straps with nickel-plated roller-style metal buckles and "D" ring keep box lid shut. Sold in pairs. Before ordering, measure space where bags will be mounted to ensure you have sufficient clearance space. Applications: All Makes All Models

HANDLEBAR MITTS Water-repellent nylon shell with soft, warm fleece lining Keep your hands warm and dry when the weather turns bad Fit easily over the handlebars to protect your hands from the brush and the elements without obstructing access to the controls Unique internal pockets hold a heat pack (not included) to keep hands comfortable�even on the coldest days. Sold in pairs. Applications: All Makes All Models, All Makes All Models, All Makes All Models

TURBO II MUFFLERS Lets engine breath freely to improve power, performance and gas mileage Double-wrapped body resists blow-out Reverse-flow design-muffler can be installed in either direction Available in 2 inlet/outlet configurations (see diagram at left). 3-1/4" x 7-3/4" oval cases are 13" long. 2" long inlet and outlet tubes. 17" long overall. Applications: All Makes All Models

RECEIVER HITCH Allows use of a ball mount or pin-pull hitch without changing hitches! Reversible insert allows trailer hitch height adjustment Installs easily on any ATV that accepts a trailer ball�won't affect ground clearance Powder-coated heavy-duty metal. Ball not included (sold separately). Applications: All Makes All Models

STREET TREAD MOTORCYCLE TIRES FOR FRONT OR REAR (TUBE) Inner tubes and rim strips sold separately Low-profile, high-confidence tires with deep, surface-hugging tread designs give over-the-road performance Micro-slot tires provide improved wet-weather handling and improved grip for better cornering and stability, plus ensure reduced heat buildup. Continuous contour treads. Meet or exceed DOT highway specifications. 2-ply nylon cord construction with 4-ply rating (load range "B") except (A) which have 6-ply rating (load range "C"). Note: Ply figures given are ply ratings ("PR" as shown on tire), not actual ply construction. How To Order. Before ordering, check tire size found on current tire sidewall or as listed in owner's manual, then order the same size tire. If ordering a wider tire, be sure to allow sufficient clearance and check the manufacturer's recommended rim widths (RRW) and load ratings (LR) to help determine which tire is best. (RRW) Given in inches. (LR) Given in pounds for each tire (based on a tire inflated to the psi indicated on sidewall); add front and rear load ratings to determine TOTAL for cycle. (SIS) Standard inch sizes Tire Width x Rim Diameter. Applications: All Makes All Models

PRIX OPEN-FACE HELMETS WITH MATCHING BOLT-ON VENTED VISOR Aerodynamic flow-through visor directs air up and over helmets to reduce drag Refer to HELMET SIZING CHART A (see below) Removable visor is painted to match color of helmets and clear-coated to resist scratches Easy to wear helmets feature a balanced, secure fit without wobble and aerodynamic design to minimize wind drag. One-piece outer shell is made with an injection-molded, specially modified thermoplastic alloy that's lightweight yet tough enough to dissipate impacts and resist penetration. Sanded-smooth outer shell is coated with premium paint. Super-fine flakes are used on metallic helmets to achieve the brilliance and depth of color. Tough, high-gloss clear polyurethane protects the painted finish against scuffs and scratches as well as permits easy soap and water cleanups. The oval PRIX logo is applied to the helmets over the clear coating and may be removed if desired. Comfort-contoured one-piece polystyrene inner shell absorbs any "leftover" shocks. Plush brushed black microfiber nylon lining with bonded-on foam backing is sweat resistant?you'll stay cool when the temperature isn't. Black double-stitched chin strap with chromed steel "D" rings is partially enclosed and padded on each side for comfort. Smooth molded black rubber trim. Meet or exceed DOT specifications. Replacement visor and mounting screws sold separately. IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models Size 2, All Makes All Models Size 2

CORNER GUARDS Enhance the appearance of your Jeep? while providing extra protection to a vulnerable area Polished diamond-plate #3003 aluminum tread-brite stands up to heavy abuse A must for the serious off-roader! Highly polished to a brilliant luster. Will never peel, flake or rust. Pop-rivet installation. Some drilling of body required. Sold in pairs. One-piece unit (sold separately) shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1987-1995 Jeep Wrangler

HEAVY-DUTY DENIM RACING BENCH SEAT COVER Stretch black poly-cotton back and side panels for a smooth, snug fit Strong, comfortable denim covers top of seat cushion (solid black) and face of seat back (checkered pattern) Black-and-white checkered seat back looks like the familiar race flag The only choice for true race fans! Every time you stop inside your pickup you'll remember that famous phrase, "Ladies and gentlemen, start your engines." It's a fun way to get you going each day and an eye-catching way to dress-up your interior. Cover slips on easily and is held in place with elastic straps and "S" hooks. Applications: All Makes All Models

REMOTE STARTER WITH KEYLESS ENTRY Has AutoStart and programmable run times (all adjustable by remote) Includes two 4-button transmitters with separate buttons to simplify operation For fuel-injected vehicles with automatic transmission 500-ft. range. Instant panic protection�like a personal alarm�sets off existing car alarm. Run time 10 minutes or 15 minutes with remote control. AutoStart system can be programmed to start engine at preset hours regardless of temperature. Diesel capable�system can be installed on diesel vehicles. Tachless hookup�easier to install, does not have to be wired through tach. Adjustable crank time. Pit stop allows you to leave vehicle running while making a quick stop. Parking light confirmation�parking lights flash when engine is started. Installation video included. 40-amp 5-wire relay may be required (sold separately; SKU# 13ZX4075T). If you need help or have questions, call Bulldog� Security Technical Assistance toll-free at 800-878-8007 or visit www.bulldogsecurity.com. Sorry, orders cannot be placed at this number or website. Applications: All Makes All Models, All Makes All Models, All Makes All Models

TAILGATE LOCKING SYSTEM Automatically locks tailgate when doors are locked Use with existing power door lock Easy to install with simple hand tools�no drilling required! Includes everything you need to wire truck's original power door locks or any Bulldog alarm system with keyless entry. Can be used with other aftermarket door locks or alarm systems. Stainless steel construction. Manufacturer's limited lifetime warranty. Applications:1994-2003 GMC Sonoma,1994-2003 Chevrolet S10 Pickup,1994-2003 GMC Sonoma,1994-2003 Chevrolet S10 Pickup

CENTER LINKS Reduce tire wear and improve steering Stop toe change caused by loose or worn out center links Replace worn center links for safe, sure, smooth operation and an improved ride. New links eliminate erratic steering and front-end wobble and assure positive front-end adjustment. w/PS: with power steering w/o PS: without power steering w/SS: with steering stabilizer w/o SS: without steering stabilizer Applications:1982-1992 Chevrolet Camaro (inc. IROC and Z28),1982-1992 Pontiac Firebird (inc. Trans Am)

GAS RYDER� LT SHOCKS For riding comfort under normal driving conditions plus superior handling during extreme travel! Exclusive VST� (Velocity Sensitive Technology) is the reason these shocks respond faster and better to changing road conditions than other shocks Provide greater control and stability without sacrificing riding comfort. High-pressure nitrogen gas charge, custom-tuned valving plus the patented VST� combine to overcome harsh conditions. Cold-drawn hardened and tempered steel rod for extra strength�shocks are warranted for as long as you own your vehicle! Over uneven city streets or highway expansion strips, the VST� senses the "easy" piston travel and tailors the ride for greater comfort. No annoying thump caused by heavy belted tires and radials. During a hard ride the VST� senses the faster piston travel and instantly increases damping resistance. Rough road or no road? VST� "knows" it and provides the control needed. Huge 1-3/8" bore (1-3/16" piston on applications with limited clearance) plus the 60% more fluid and gas capacity than conventional heavy-duty shocks means they run cooler to provide easier handling and greater stability. Additional features include huge 1-3/8" piston; 90% more working area than 1" shocks; 1/3 more working area than most heavy-duty shocks; bigger working area means shocks last far longer; larger working area also ensures shocks will control vehicle motion better and with far less internal working pressure. Exclusive sealing system (the best available) and all-weather fluid included. Replace shocks in pairs for best results. Limited lifetime warranty. Applications:1967-1979 Ford F-Series Pickup F350 2WD,1970-2003 Ford F-Series Pickup F150,1965-2003 Ford F-Series Pickup F100; F250,1967-1977 Ford Bronco - Full Size

LED PARKING/SIGNAL LIGHTS Flexible aluminum base adheres to any surface?flat or curved?with 3M? tape Function as OE-look signals Wire into 12-volt system Add a high-intensity color to your exterior. Easy to install. No drilling or cutting required. 5" long. Sold in pairs. Limited one-year warranty. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

PERFORMANCE HEADER SET Replaces exhaust manifold perfectly and retains all emission fittings�no modifications! Custom-fit header set is performance tuned and engine matched to unleash your vehicle's full potential Up to 35% more flow than stock for power and torque gains you can feel! Performance gains achieved in low- and mid-range RPM range�ideal for street and highway speeds Mandrel-bent heavy-gauge tubing streamlines gas flow for better performance�more horsepower, cooler running and longer-lasting engine. Corrosion resistant. 50-state legal. Set includes premium gasket and hardware. Will not void manufacturers' new truck warranty. Limited lifetime warranty. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. COMPARE THE GIBSON DIFFERENCE! HORSEPOWER ��TORQUE (FT./LBS.) RPM Stock Gibson Increase Stock Gibson Increase Chevy 5.7L F.I. 2500 130 150 20 273 315 42 3500 160 195 30 240 300 60 Ford 5.8L F.I. 2500 130 155 25 273 326 43 3500 163 190 25 248 285 37 Dodge Dakota 5.2L 2500 100 120 20 210 252 42 3500 155 195 40 233 292 59 Applications:1991-1999 Jeep Cherokee 4.0L,1993-1999 Jeep Grand Cherokee 4.0L

MULTIPIECE BRA Breathable black vinyl with nonmarring backing Slips on easily in a matter of minutes For cars, pickups, vans and SUVs Custom tailored for a smooth, snug fit. Depending on application, hood can be raised without removing bra. Air-dries quickly. Breathes to allow some moisture to escape, resists mildew formation. Backing won't scratch hood or fenders. Includes cutouts (where original) for (pop-up) headlights, driving lights, fog lights and turn signals. No alterations necessary. No drilling required for installation. Includes instructions. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications:1991-1993 Nissan NX 1600

LOADING RAMP KITS Kits include everything you need except the planks Now it's easier than ever to roll your bike or ATV onto a pickup bed Make your own ramps and save! Build your own custom loading ramps and roll heavy items into pickup bed or van almost effortlessly and with little lifting or back strain. Ramp capacities are approximately 1,400 lbs. a pair or 700 lbs. each based on use with common 2 x 8 (1-1/2" x 7-1/2" actual size) or 2 x 12 (1-1/2" x 11-1/4" actual size) fir plank. Use oak or maple for higher capacities. RAMP TOPS. Solid 3/16" thick plate steel. Predrilled one-piece top mounts to underside of plank with carriage bolts, nuts and washers. Drilling of plank required. Large tongue holds ramp on tailgate or trailer floor. Recessed diamond grid on tongue minimizes slippage when it's wet. Predrilled tongue accepts self-tapping, screw-in steel hold-down pins to help stabilize ramp and prevent movement and separation. Tailgate or trailer floor must be drilled to use pins. Attach adhesive rubber pad to underside of top to prevent marring and to reduce ramp movement. RAMP BOTTOMS. Heavy-duty black rubber bottom wraps around end of plank and secures with pull-out-resistant nails. Ensures no-bump loading/unloading. Ridges on both top and bottom minimize ramp slippage. TRACTION TRACKS. Approximately 6"W x 12"L metal tracks mount to planks with nails. Each track has more than 150 raised 1/8"H circular ridges that provide the traction edges needed to help prevent slippage in wet/muddy conditions. Kits include instructions, hardware and ways to determine proper plank length. Applications: All Makes All Models, All Makes All Models

STRUT TOWER BARS AND TIE BARS Reinforce and strengthen suspension while tightening up handling and improving steering CNC machined 6061 billet aluminum Applications:1988-1991 Honda Civic Si,1988-1991 Honda CRX Si

DIAMOND-PATTERN TIRE CHAINS Meets SAE Class "S" clearance for cars, pickups and SUVs Diamond pattern ensures lateral stability, a smoother ride and better grip Refer to TIRE SIZE CODE CHART (see below) for proper ordering Automatic snap-on installation is the easiest we've seen! Safety designed for easier starts, faster stops and better traction! Also prevents damaging vibrations especially in FWDs. Self-locking 2-way hooks plus tempered steel hoops allow "blind" installation from the outside of the tire. No need to crawl under vehicle. Last twice as long as conventional chains. Heavy duty?cross chains are manganese alloy, zinc plated to resist rust. D-shaped links maximize strength, ensure dig-deep traction. Heat-treated side chains, inside hoops, hooks. Includes rubber tighteners, plastic carry bag, plastic gloves, waterproof installation mat and instructions. For FWD and RWD vehicles with radial and conventional tires. Chains meet the requirements of vehicles labeled SAE Class "S" in the owner's manual. Sold in pairs. Applications: All Makes All Models, All Makes All Models

BATTERY ISOLATORS Run accessories in vehicle without draining battery Automatically charges auxiliary battery as you drive, never overcharges Self-contained electrical system converts alternator or generator to safe, efficient charger Automatically isolate both the auxiliary and vehicle batteries so the discharge of one does not drain the other's power. Handle alternators up to 160 amps. Rectifiers and heat sink allow maximum heat dissipation without mechanical attachment. Eliminate shorting problems. Solid state. For all 6- to 36-volt, negative-ground electrical systems. UL listed. Choice of 2-battery systems (one vehicle battery and one auxiliary) and 3-battery systems (one vehicle battery and 2 auxiliaries). Choose isolators, connector kit, and emergency start battery isolator. Applications: All Makes All Models, All Makes All Models, All Makes All Models

RV RACK AND LADDERS Choose rack, contour-back ladder or straight-back ladder Complete with all hardware and instructions Rack and ladders made of strong, bright anodized aluminum tubing which is adjustable to fit any size. Applications: All Makes All Models, All Makes All Models, All Makes All Models

CHROME-PLATED HANDLEBAR-MOUNT ROUND MIRROR Chromed metal housing Approx. 4" diam. distortion-free flat mirror surface accurately indicates distance of objects to the rear 3/8" diam. chrome-plated metal stem with adjustable ball socket Universal mounting clamp fits 7/8" and 1" diam. handlebars and allows 4" stem to be adjusted for best viewing. Applications: All Makes All Models

PREMIER SERIES ABS RUNNING BOARDS High-impact ABS plastic with full-length steel reinforcement for additional strength Full-length step pad for no-slip footing Custom-fit body-mounting kit for secure, easy installation A custom touch for your truck and easier, safer entry/exit for you and your passengers. Black OE finish�ready to install or easily painted to match truck. Sold in pairs. Applications:1997-2003 Ford F-Series Pickup Cab Type: Extended/Quad Cab; Sub Model: F150; F250 Light Duty

BOLT-ON SADDLEBAGS Feature large box-lid-closure tops that secure with heavy-duty straps with chrome-plated roller-style buckles Custom-fit saddlebags provide your cruiser with much-needed extra storage space plus custom styling! Black-dyed heavy-duty 9-ox. Latigo leather is good looking, very long lasting and shape retaining Bolt easily to existing mounting points of original rear fender or fender-side support struts. No drilling needed. Include black powder-coated metal support brackets (not shown). 3-sided wraparound lid is tapered to enhance the slanted styling of the bags. Top and sides of the box lid plus the front of the bags are brightened with chrome-plated 1/2" diameter raised dome studs. Wheel-side back of bag features leather-lined PVC and ABS panels that strengthen the bag. Before ordering, measure space where bags will be mounted to ensure you have sufficient space and clearance. Applications:1998-2000 Suzuki Intruder VL1500

ANTI-SWAY BAR KIT The same bar used by winners in SCCA, NASA, IMSA and SOLO races! Lightweight and ultra strong aerospace-quality 6150 steel Race-engineered to work perfectly with all suspension components (stock or aftermarket). Durable, long-lasting polyurethane bushings. Wet-look, black powder-coat finish looks awesome. Custom brackets with exclusive Grade 8 (or better) hardware for easy bolt-on installation. (A) Car with aftermarket exhaust and the routing/size of pipe/mufflers are substantially different from stock, rear anti-sway bar may not clear. Applications:1988-1991 Honda CRX 22mm Bar Diamter,1988-1991 Honda Civic 22mm Bar Diamter

AIR CONDITIONING SERVICE KITS For R-12, R-22 or R-502 systems. Choose deluxe or basic service kits. Test and recharge (refrigerant not included) your air conditioning system to assure maximum cooling efficiency. Select deluxe or basic kit. Applications: All Makes All Models

CUSTOM-FIT DOOR SEAL WEATHERSTRIPPING Helps end drafts and whistles Prevents water and dirt from getting inside, causing damage or rust Restores proper seal around entire door. Black rubber won't crack. Simple push-on installation with molded-in metal or plastic clips (some vehicles require glue, which is not included). Fits front driver's or passenger's side, except where noted. Applications:1967-1972 Ford F-Series Pickup

HEADLIGHT TRIM For VW '67-77 Beetle and '66-73 Type III Replaces original outer headlight trim perfectly. Applications:1966-1977 Volkswagen Beetle - Air Cooled,1966-1973 Volkswagen Fastback Type III,1966-1973 Volkswagen Squareback Type III

FLAMES SEAT COVER Outline of flames and cover illuminate! Terrific when you want a "hot seat" The perfect complement to other flames accessories Cover hooks up easily to car's 12-volt system. Switch lets you turn illumination on or off. Foam-backed vinyl seating area with cloth on the side and back. Slips easily onto any bucket seat. Applications: All Makes All Models, All Makes All Models

DUAL TRUMPET AIR BLASTERS Everything you need for the "Big Truck Air System" sound and look on any vehicle No "pump up" waiting time�blast is instantaneous More than just a horn system�doubles as auxiliary air system for inflating tires, air mattresses or cleaning with air Two gleaming chrome-plated die-cast trumpets (13-3/8"L and 10-7/8"L with 3-3/4" diam. bells) are mounted side by side. 15-3/4" overall. Compact (5-1/2" x 3-1/2" x 5-1/2") 150-psi compressor delivers super-powerful 133db blast. Heavy-duty air tank (with gauge) stores up compressed air. Lanyard operated just like the big trucks. Kit includes trumpets, air tank, compressor, lanyard, tubing with brass fittings, wiring, hardware, gaskets, 25-ft. auxiliary air hose (with air valve) and instructions. For 12-volt systems only. Note: Check local noise abatement laws to avoid legal violations. Applications: All Makes All Models

Manufacturer: Arkon
SKU: 12ZX5989N

CUSTOM-FIT OE-STYLE SPLASH GUARDS Custom molded to fit your truck perfectly! Contoured to match truck's lines Black thermal plastic won't crack or fade...remains flexible even in the coldest weather Protect your truck's finish against dirt, stone, tar without spending a lot! These guards look great and they keep your truck looking great for years. Approx. 10" x 15". Install easily. Hardware included. Drilling required. Applications:1998-2001 Ford Van - Full Size Front,1996-2001 Ford F-Series Pickup F150 Front,1997-2001 Ford Expedition Front,1995-2001 Chevrolet Tahoe with OE running boards Front,1999-2001 Jeep Grand Cherokee Laredo; Front & Rear,1984-1996 Mitsubishi Pickup Front & Rear

ENGINE-COOLING FAN - HIGH-VOLUME 1-1/2" wider than stock fan Replaces original easily For air-cooled Volkswagens Protects engine against its worst enemy�heat. A must for competition. Heavy-duty steel. Fits all '71-79 Volkswagen Beetles, Super Beetles, Karmann Ghias, Things, Buses and Transporters with 12-volt generator or alternator. Also fits earlier models with engines converted to late-model "doghouse" fan shroud. Kit includes hardware. Applications:1971-1979 Volkswagen Beetle - Air Cooled,1971-1979 Volkswagen Super Beetle,1971-1979 Volkswagen Transporter,1971-1979 Volkswagen Bus,1971-1979 Volkswagen Thing,1971-1979 Volkswagen Karmann Ghia

WHEEL BEARING AND SEAL KIT Replace worn bearings for improved safer handling and longer tire life Choose front or rear bearing and seal kit or bearing only For Honda ATC? models High-grade alloy steel bearing has 2 rubber seals to help prevent sand, mud, dirt and water penetration that can cause premature wear. Kit also includes one grease seal for added protection. Applications:1985-1987 Honda ATC Models ATC250SX,1981-1984 Honda ATC Models ATC250R,1984-1986 Honda ATC Models ATC200S,1983-1987 Honda ATC Models ATC200X,1982-1983 Honda ATC Models ATC200E,1981-1983 Honda ATC Models ATC185S,1980 Honda ATC Models ATC185,1986-1987 Honda TRX Models TRX125,1984-1985 Honda ATC Models ATC1125M,1979-1985 Honda ATC Models ACT110

CUSTOM-FIT DOOR SEAL WEATHERSTRIPPING Helps end drafts and whistles Prevents water and dirt from getting inside, causing damage or rust Restores proper seal around entire door. Black rubber won't crack. Simple push-on installation with molded-in metal or plastic clips (some vehicles require glue, which is not included). Fits front driver's or passenger's side, except where noted. Applications:1982-1993 Chevrolet S10 Pickup,1982-1993 Chevrolet S10 Blazer,1982-1993 GMC S-15 Pickup,1982-1993 GMC S-15 Jimmy

SOFT-MOLDED� DASH COVERS Limited lifetime warranty Available with or without monogramming Custom molded for pickups and SUVs Smooth and luxurious�no seams or darts except for the beautiful color-matched felt edging. Molded to the exact shape of original dashboard. Fade-proof, solution-dyed polyester fits dash like a glove. Molded to fit every molding, every ridge, every tiny contour perfectly. Slip on easily and held securely in place by hook/loop tape. Made to look like it "belongs" on your dash. Covers protect dash against the summer sun and the winter cold. Clean easily. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like. Applications:1973-1996 Chevrolet C/K Pickup (std.; ext. cab),1973-1994 Chevrolet Blazer - Full Size,1986-1997 Chevrolet S10 Blazer,1973-2003 Chevrolet Suburban,1995-2000 Chevrolet Tahoe (Old Style),1987-2004 Dodge Dakota,1998-2000 Dodge Durango,1981-2002 Dodge Pickup - Full Size Ram,1981-1993 Dodge Ramcharger PowerWagon,1980-1996 Ford Bronco - Full Size,1983-1990 Ford Bronco II,1997-2002 Ford Expedition,1990-1994 Ford Explorer,1999-2004 Ford F-Series Pickup Super Duty w/4-vent dash,1983-1994 Ford Ranger,1973-1991 GMC Jimmy - Full Size,1973-1996 GMC C/K Pickup (Std./Ext.Cab),1986-1997 GMC S-15 Jimmy,1999-2002 GMC Sierra (New Style),1973-1996 GMC Suburban,1992-1996 GMC Yukon,1996-1998 Jeep Grand Cherokee,1991-1994 Mazda Navajo,1986.5-1993 Nissan Pathfinder Hardbody Pickup,1980-1993 Nissan Pickup,1991-1997 Oldsmobile Bravada,1990-2002 Toyota 4Runner,1984-1995 Toyota Pickup w/o inclimometer,1998-2004 Toyota Tacoma,1994-1997 GMC Sonoma,2000-2004 Toyota Tundra

DIAMOND-PATTERN VELOUR SEAT COVER SETS Protect new or existing seats or rejuvenate old or worn upholstery Unique diamond pattern is attractively stitched to add to the rich appearance Luxurious polyester velour with fade-resistant color. Protect new or existing seats or rejuvenate old or worn upholstery. Provide complete coverage of entire cushion, sides and backrest area. Stretch polyester sides and back ensure snug, wrinkle-free fit. Extremely durable�resist stains, withstand wear. Meet or exceed original-equipment material standards. Strong double-stitched and reinforced seams. 1/2" thick foam padding. Install securely over existing seats with self-fastening straps. Machine washable. Matching accessories not available. Front and third seat sets include 2 front buckets or one front bench seat. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. To receive a color fabric sample(s), call (877) 927-7427 and request the color(s) you would like. Applications: All Makes All Models

ROCKET LOCKER STAINLESS STEEL BED RAILS WITH LEDs Mirror-polished NeverRust? die-cast stainless steel comes with Putco's lifetime warranty Long-lasting built-in LED at the end of each rail operates with brake light, running light, turn signal or hazard lights Wired for easy clamp-on hookup to existing taillight wiring Custom-fit stylish protection for bed plus greater driving safety and extra tie-down points! Clear LED with clear lens glows red with rear taillights. Mount easily in stake bed pockets?no drilling needed. 500-lb. tie-down strength. Sold in pairs. Applications:1994-2001 Dodge Pickup - Full Size Bed Type: Long Bed; Sub Model: Ram 2500/3500

WHEEL SIMULATORS - STAINLESS STEEL A great way to give your stock wheels a custom look at a fraction of the price! 4 different mounting styles available (rear wheel valve extenders sold separately) Add a bright custom look without sacrificing the safety and strength of your original wheels. Kits include rustproof, polished 304 stainless steel simulators (front and rear) and axle covers to dress up 4 wheels. For the 2WD and 4WD dual-wheel vehicles with chassis types indicated (not for split rims). Mount easily over stock painted wheels�no installation hassles, no alterations to wheel or tire assembly, no need to remove or balance wheels. Won't interfere with maintenance�and easy to clean too! Note: For vehicles with Dual Rear Wheel only. Applications:1976-1980 All Makes All Models Dodge M600 Chassis with 6-lug Wheels (Also Fits John Deere; Oshkosh; Spartan Chassis with 6-lug; 6-hand Hole Wheels); 19.5"

DELUXE 62 ALARM WITH REMOTE STARTER AND KEYLESS ENTRY Reliable auto alarm and convenient remote starter 40-amp Relay with 5-wire Socket may be required (sold separately) For fuel-injected vehicles with automatic transmission (diesel capable) Auto Alarm: Valet switch temporarily overrides system. 4-button remote transmitters means a separate button for specific features to simplify operation. Dual-stage shock sensor delivers a warning sound when a light tap is detected and triggers the alarm if warning is unheeded (sensor is adjustable by remote). Instant door trigger protection�alarm sounds if any door is opened while alarm is active. Parking light confirmation�parking lights will flash continuously if alarm is triggered. Lights will flash once when alarm is activated and twice when alarm is de-activated. Keyless entry uses transmitter to lock/unlock existing power door locks. Remote trunk release�remote transmitter opens trunk with the push of a button. Dome light supervision�dome light comes on for safety when alarm is disarmed. 6-tone 126 dB siren. Factory horn honk lets you hook up horn so it honks with siren. Plug-in LED acts as a visual deterrent. Starter kill disables starter to prevent any unauthorized person from driving vehicle. Windows decals for visual deterrent. Remote Starter: Starts engine and vehicle's accessories with a push of a button on the transmitter. Range up to 1/4 mile. Adjustable run time using remote transmitter. Automatic hot/cold start�engine/accessories can be programmed to start automatically when temperature reaches -40? to 20? F or to 110? to 160? F. Fully adjustable engine crank time. Pit-stop feature lets you safely leave vehicle running without keys. Low-voltage sensing-system starts automatically if voltage in battery drops�prevents dead battery. "Hands-free" keyless entry. Need information? Call Bulldog? Security at 1-800-878-8007. Sorry, orders cannot be placed at this number. Technical assistance is also available at www.bulldogsecurity.com. Applications: All Makes All Models, All Makes All Models, All Makes All Models, All Makes All Models

BLACK LEATHER TOOL BAGS AND SISSY BAR BAGS Decorated with round silver-colored metal concho with leather lace plus your choice of accent trim Choose tool bags or sissy bar bags Convenient way to store tools or other small items Large flap closure with 2 buckled straps. 2 through-the-back buckled leather straps secure bags to bike. Beautifully designed and crafted. Classic-styled bags provide secure extra space to safely carry gear. Black-dyed heavy-duty leather with reinforced seams/stress points for years of great looks and dependable service. Large top opening for easy access. Large flap closures secure with leather straps with nickel-plated roller-style buckles and "D" rings. Nickel-plated 5/16" flat-top rivet studs (with or without leather fringe). 5/8"W braided leather edging (with or without leather fringe). Note: Before ordering, measure space where bags will be mounted to ensure sufficient space and clearance. Applications: All Makes All Models 10" high bag with concho; braided edging & fringe, All Makes All Models 10" high bag with concho; braided edging & fringe, All Makes All Models 10" high bag with concho; braided edging & fringe

DISC BRAKE CONVERSION KITS Convert right and left sides Many kits available Give superior braking performance under extreme operating temperatures: while towing, off-road driving, using oversize tires or driving in rain. Complete with all rotors, calipers, pads, brackets, hardware and easy-to-follow instructions. No drilling or welding needed with these bolt-on kits. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. Applications: Jeep Wrangler, Jeep CJ7, Jeep CJ6, Jeep CJ5, Jeep Scrambler

SHORTY HELMETS Aerodynamic one-piece hand-laminated multilayer fiberglass outer shell with cutaway sides to prevent that "closed-in" feeling! Refer to HELMET SIZING CHART C (see below) A contoured-to-fit one-piece expanded polystyrene inner shell with cushiony foam padding Everything you want in a helmet�balance, light weight, toughness�looks! Deluxe liner (described below) plus the venting system make these one of the most comfortable helmets you've ever worn! Black fingertip-adjustable, dual-port, dual-slide forehead vents permit refreshing flow-through ventilation and speed up moisture/perspiration evaporation. Open-ear nylon chin-strap retention system promotes unimpaired hearing. Deluxe wraparound neck/ear storm curtain is fully padded, extra thick and features a soft black cotton/polyester liner (matches interior liner) plus a soft-touch leather-look black vinyl outer cover for more styling. Curtain zips on/off as needed. Easy soap/water cleanup. 3-snap front and black peak bubble visor with black-finished snaps (finish conceals snaps). Black nylon chin strap with metal "D" ring. Wraparound black rubber composite trim. Meet or exceed DOT specifications. DELUXE TAILORED-FIT LINER! Full-surround lining. Custom designed of a special black 60% cotton/40% polyester blend. Dual textures! Breathable mesh lining that wraps around the outer bottom edge. When forehead vents are open, this lining allows more air to be pulled up into the helmet for increased air circulation and added warm-weather comfort. Soft, solid lining around the sides of helmet and on the specially padded crown. Darts sewn throughout this lining guarantee one of the best fits possible�very snug yet very comfortable! IMPORTANT NOTE: Click on HELMET SIZING CHART link for helmet sizing information. Applications: All Makes All Models, All Makes All Models

BILLET ALUMINUM UNDER-HOOD STYLING ACCESSORY KIT Aircraft-grade billet aluminum, individually crafted and hand polished to a mirror finish The ultimate custom sparkle for your engine compartment! Each accessory is designed for its specific truck and fits without modifications or alterations Only True Billet? builds custom-fit dress-up parts that you can install with just the turn of a screw! You get a custom look that doesn't require custom fitting. Shipped separately from factory. NOTE: SKU numbers ending in F are factory shipped and may take a little longer to reach you. KIT CONTENTS 7-piece Kit. Includes brake reservoir cover and 6 caps (brake fluid, power steering, overflow, washer fluid, engine oil, radiator). 11-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover. 13-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, extra battery cover, fuel test port. Complete 14-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, 2 fender supports, fuse cover. Complete 15-piece Kit. Includes full transmission dipstick, 8 caps (overflow, engine oil, oil dipstick, 2 air conditioner, washer fluid, power steering, brake fluid), brake reservoir cover, battery cover, fender support, fuse cover, extra battery cover, fuel test port. Applications:1999-2002 Chevrolet Tahoe 4.8L; 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,1999-2002 GMC Sierra 4.8L; 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,1999-2002 Chevrolet Silverado 4.8L; 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,2000-2002 Cadillac Escalade (inc. Escalade EXT) 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,1999-2002 GMC Yukon XL 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,1999-2002 GMC Suburban 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,1999-2002 Chevrolet Suburban 5.3L; 6.0L 3/4-ton with Hydraulic Brakes,2002 Chevrolet Avalanche 5.3L 3/4-ton with Hydraulic Brakes

"FLAMES" FLOOR MATS Made of black rubberized vinyl with molded-in flame design Offer heavy-duty protection through years of service The ultimate in floor mats! Design will not wash, wear or peel off. Clean up easily with soap and water. Front mats measure 26" x 18", rear mats measure 17" x 14". Sold in pairs. Applications: All Makes All Models

© StoreDaily.com inc. Copyright 2008. All rights reserved. Blog