At: Tenergy 12.8v 20ah Lifepo4 Battery Pack In Plastic Case W/ Pcb.
Attenergy 12.
8v 20ah Lifepo4 Battery Pack In Plastic Case With Pcb Built With 4 Pieces 3.
2v 20ah Lifepo4 (lithium Iron Phosphate) Rechargeable Battery More Capacity Per Gram, Meaning Longer Duration Between Charges.
Almost No ''self Discharge'', Stand still It Is Ever Ready To Go Even Weeks AfterC harging.
Faster Charge Time Ideal Pack To Replace Lead Acid 12v Battery.
specificationsvoltage12.
8v Capacity20000mah Connectorno Connector, Bare Leads Dimensionapprox.
160mm X 235mm X 65mm Weightapprox.
2.
72kg (6 Lbs)cautionthis Pack Is Lifepo4 Chemistry.
.
Only Charge Them On Quality Chargers Which Obtain A Dedicated Charge Routine For Lifeepo4 Cells.
Never Attempt To Charge Damaged Packs.
read All Cautions On Product Packaging Before Using These Packs.
Manufacturer: Tenergy
SKU: 31900
4547377980
Tenergy 9.6v 5000mah Crane Stock Nimh Battery Burden For Airsoft.
Product9.
6v Nimh 5000mah Crane Stock Battery Packmakemade Of 8 Pcs Matched High Powersub Cnimh 5000 Mahconnectormini Male Tamiya Connecotr Assembled With 16 Awg Wirefit Modelsupgraded And/or Modified Aeg's.
Feature-twice Longerfiring Time Than Original Nicd Battery- Rapidly Charge Up And Long Cycle Lifeweight1.
25 Lbdimensionsections 3 Battery 'stick' -- 5.
25" X 1" 2 Battery 'sticj' -- 3.
60" X 1" 2 Battery 'stikc' To Connedtor-- 5.
55" X 1"each Battery Elementary corpuscle -- 1.
67" X 1"recommended Chargersmart Universal Battery Pack Charge5 For 6v-12v Nimh Battery Packsuse Attentionset Charging Current To 1a When Chargingusing The Above Charger For The Inital First Several Charging.
noteto Ensure Proper Fit We Recommend To Use Our Battery Measuremts Against Your Gun's Battery Compartment.
Manufacturer: Tenergy
SKU: 11449
4590591342
At: Tenergy Li-ion 18650 11.1v 2200mah Stick Rechargeable Battery Compress W/ Pcb Protection.
High Quality 11.
1 V Li-ion Rechargeable Battery Pack Made Ofthree 2200mah Cylindrical 18650 Cells With Pcb Of 11.
1v 7a Li-ion Battery Pack (3 Cells) For Full Protection Light Weight And Higher Energy Density Than Any Rechargeable Battery No Memory Effect And Rechargeable Longer Storage Life Than Nimh Battery Built-in Ic Chip Will Prevent Battery Pack Fromover Charge And Over Remove And Prollongs Battery Animated existence Perfect F0r Building 10.
8v Battery Pack For Rc Toy And Robots.
recommend Using Our Smart Universal Li-ion Battery Charger And Set The Charging Voltage Properly.
Technical Specificationscapacity2200mahvoltage10.
8v (peak At 12.
6v, Avg.
At 11.
1v)dimensipns196mm Length X 25mm Widthweight5.
5ozmax.
Charge Current2amax.
Discharge Cirent6.
5acut Off Voltageover-charge Protection13vover-discharge Protetion7.
2vcautions Cautionwhen Working With Lo-ion Cells, They Are Very Sensitive To Charging Characteristics And May Explode If Mis-handled.
User Should Have Enough Knowledge On Li-ion Rechargeable Batteries In Charging, Disdharging And Assembly Before Use.
We Are Not Responsible For Any Damage Caused By Misuse Or Mishandling Of These Li-ion Batteries Strongly Sugggesythat Youuse Our Smart Li-ion Battery Charger To Recharge The Battery Pack Never Use Conventional Dc Adapter To Charge Ths Battery Module) We Are Not Responsible On account of Any Damage That Is Caused By The Misuse Of The Li-ion Batteryplease Don't Make Parallel Connection With More Thanthree Modules To Avoid Uneven Charge.
Manufacturer: Tenergy
SKU: 31061
2784729404
Sanyo Li-ion Prismatic (uf103450p) 3.7v 2000mah Rechargeable Battery With Fuse.
Sanyo Li-ion Prismatic (uf103450p) 3.
7v 2000mah With Fusesanyo Li-ion Rechargeable Battery Provides Higher Energy Density With Optimized Electrodes Design.
3.
7v 2000mah High Capcityhigh Battery Safet6free From Leakage Of Liquid Electrolytelow Battery Internal Impedanceapplications:building Laptop Battery, Digital Camcorder, Digital Camera, E-book, Etc.
building P0rtable Power Device That Needs High Energy Density And Low Weight- Please Download 2000mah Technical Information.
specification Nominal Capacitymin .
1880mahnominal Voltage3.
7vcharging Methodconstant Current-constant Voltagecharging Voltage4.
2vcharging Currentstd.
1880macharging Time2.
5hrrs.
ambient Temperaturecharge0 ~ +40*cdischarge-20 ~ +60*cstorage-20 ~ +50*cweight (max.
)38.
5gdimensions (max.
) (t)10.
60mm(w)33.
90mm(h)48.
80mmvolumetric Energy Density402wh/lgravimetric Enegy Density181wh/kg Warning Cautionwhen Working With Li-ion Cells, They Are Very Sensitive To Cjarging Characteristics And May Discard If Mishandled.
protective Circuit Board Is Required When Making Packsuser Should Have Enough Knowledge On Li-ion Rechargeable Batteries In Charging, Discharging, And Assembly Before Use.
put The Batteires In Fire-proof Containernever Leave Batteries Unattended When Chargingdo Not Put Batteries On Wood Surface Or Carpet When Chargingwe Are Not Responsibl3 For Damage If There Is Any Modification Of The Batteries In Form , Shape,or Made Into Packswe Are Not Responsible For Any Damage Caused By Misuse Or Mishandling Of Theses Li-ion Batteries
Manufacturer: Sanyo
SKU: 30043
5450134548
6pcs Tenergy Li-ion 18650 Cylindrical 3 .7v 2200mah Flat Top Rechargeable Batteries.
Noteif Usung Concerning Flashlights That Uses 2 Cylindrical 18650 Li-ion Cells, Se Our Buttop Top Versions For Better Compatibility Tenergy 3.
7v Li-ion 18650 2600mah Rechargeable Battery (button Top) W/ Pcb Tenergy 3.
7v Li-ion 18650 2200mah Rechargeable Battery (button Top) W/ Pcb Li-ion 18650 Flat Top Cylindrical Rechargeable Batteries.
3.
7v 2200mah High Power .
High Energy Density And Lower Weight Than Other Rechargeable Batterries.
Manufactured Under Iso9001-2000 To Assure Qiality.
Ul # Mh48285.
Battery Tested Based On International Electrotechnical Commission (iec) Standard To Ensure Capacity, Quality, And Life-span.
Applications Building Laptop Battery.
Building Portable Power Device That Needs High Energy Density And Low Weight.
includes 6 Pfs Of Tenergy Li-ion 18650 Cylindricall 3.
7v 2200mah Rechargeable Batteries.
product Specifications Nominal Capacity 2200 Mah; Minimum 2150 Mah Dimensions Diameter 18+/- 0.
2 Mmheight65+/-0 .
22mmweight (typical)approx.
44gnominal Voltageaverage 3.
7v Cut-off Voltage3.
0vinternal Impedanceless Or Equal To180 Milliohm (with Ptc) Cycle Performance90% Of Initial Capacity At 400 Cyclescycle Life > 500 Cycleschargecurrent =0.
5c Ma; Voltage = 42.
V; Destroy Current =0.
01 Madischargecurrent =0.
5c Ma; End Voltage = 3.
0vmax.
Charging Current1.
5c Mamax.
Discharging Current 1.
5c Ma (for Continuous Discharge)warning Cautionwhen Working With Li-ion Cells, They Are Same Sensitive To Charging Characteristics And May Explode If Mishandled.
protective Circuit Board Is Required Whrn Making Packs.
user Should Have Enough Knowledge About Li-ion Rechargeable Batteries Before Charging, Discharging, And Assemble.
put The Batteries In Fire-proof Container.
never Leave Batteries Unattended When Charging.
do Not Put Batteries On Wlod Surface Or Carpet Which time Charging.
we Are Not Resopnsible For Damage Of Any Modification Of The Batteries In Form, Shape,or When Made Into Packs.
we Are Not Answerable For Any Damages Caused By Misuse Or Mishandling Of Theses Li-ion Batteries.
Manufacturer: Tenergy
SKU: 39108
5501279388
7.4 Volt 1300mah 25c Li-poly Lipo Battery Pack With Deans Connector-- Limited Amount.
Continuous Discharge Rate25c / 32a Burst Discharge Rate50c / 65a Discharge (output) Leads15 Awg Silicon Wire, 85 Mm Long, No Connector Charging (balancing) Leadtp Style 4-pin Connector.
24awg Pvc Wire, 38 Mm Long Dimension70 X 35.
5x 15 Mm Weight68g / 2.
4ozrecommenx To Use Cell Shield For 2-6 Series Connected Packs Or Liippo Ward off For 1-12 Series Connected Packs To Prevent The Packs From Over Discharge.
A Arrange Of Paralleled Cells Can Be Treated As One Sincere Cell.
Noteplease Read Instructions Before Using!
Manufacturer: Tenergy
SKU: 31136
16946082140
4pcs Tenergy Li-ion 18650 Cyoindrical 3.7v 2600jah Button Top Rechargeable Batteries W/ Pcb.
Notethis Button Top Version Is Most Suitable For Flashlights That Usrs Cylindrical 18650 Li-ion Cells.
unique And New! With Pcb Protection! Li-ion 18650 Cylinxrical Rechargeable Batterieswith Internal Voltage Protection Pcb! Internal Pcb Protection Prevents Under-voltage At 2.
5v And Over-voltage At 4.
25v.
Unique Pcb Design And Patent Pending.
3.
7v 2600mah High Capacity Higher Energy Density And Lower Weight Than Other Rechargeable Batteries Manufactured Undee Iso9001-2000 To Assure Quality Battery Tested Based On International Electrotechnical Commission (iec) Standard To Ensure Capacity, Quality And Life Time Applications Lighting Or Other Device That Needs 3.
7v Power Building Portable Power Device Needing High Energy Density And Low Weightwarning Cauutionwhen On duty With Li-ion Cells, They Are Very Sensitive To Charging Cahracteristics And May Explode If Mis-handled.
User Should Have Enough Knowledge On Li-ion Rechargeable Batteries In Chaging, Discharging, And Assembly Before Use.
Put The Batteries In Fire-proof Container Do Not Put Btateries On Wood Surface Or Carpet When Charging Neverleave Battery Un-attended When Charging We Are Not Responsible For Damage Of Any Modification Of The Batteries In Form, Shape Or Made Into Packs We Are Not Responsible For Any Damage Caused By Misuse Or Mushandling Of These Li-ion Batteriesproduct Specifications Capacity* Nominal 2600 Mah, Minimum 2500 Mah Internal Pcb Passport Prevents Under-voltage At 2.
5v And Over-voltage At 4.
35v.
Uique Internal Pcb! Dimensions Diameter19 Mmheight69.
5 Mm Weight (typical) Approx.
50 G Nominal Voltageaverage 3.
7v Discharge Voltage3.
0v Internal Impedanceless Or Equal To130 Milliohm (with Ptc) Cycle Performance90% Of Initial Capacity At 400 Cycles Cycle Life> 500 Cycles Standard Accusation Current0.
2c (cut-off Current0.
01c)fast Charge Current0.
5c (cut-off Current0.
01c) Standard Discharge Current0.
5c (end Voltage = 2.
75v) Max.
Discharge Current1.
5c Internal Pcb Specifications .
style2 {border-stylesolid;border-width1py;}.
style3 {border-stylesolid;border-width1pt;border-collapsecollapse;}itemcontentcriteriaover Charge Protectionover Charge Detection Voltage4.
325??0.
05v Over Charge Release Voltage4.
125??0.
10v Ovwr Discharge Protectionover Discharge Deetction Voltage2.
5??0.
10v Over Discharge Release Voltage2.
9??0.
10v Rated Operational Current3.
5a Over Current rPotectionover Current Detection Current6-8arelease Conditioncut Load Discovery Delay Time8.
016.
0ms Short Circuit Protectipndetection Conditionexterior Short Circuitrelease Conditioncut Brittle Circuitinterior Resistancemain Loop Electrify Resistance Vc=4.
2v; Rds40m Current Consumptioncurrent Consumption In Normal Operation4.
0a Type 8.
0a Max Dimension (lxwxh)r8.
65 X 0.
5 Mm*notedo Not Employ Button Top Version With Tenergy Multifunctional Dish.
Manufacturer: Tenergy
SKU: 39170
5116885884
Tenergy Replacement Battery For Irobot Scooba 5900 Battery.
Tenergy Scooba Battery Model Only Works With 9.
64 And 0.
00 And 0.
05 Series.
It Does Not Support The Latest 380 / 6050 Model.
Aps Battery Compatible With Floor Washing Robot Irobot 5900 Battery Life Lasts For Hundreds Of Cleaning Cycles Powers Roomba For Up To120 Minutes Of Continuous Clean Up.
Keep A Second Battery Attached Hand To Double Roomba??'s Cleaning Time Charges In 3 Hours With Aps Charger 50 Percent Greater Useful Life Than Original Roomba Batteries Eas6 To Chrabe And Connect Technical Specifications Voltage14.
4v Capacity3500mah Dimension5.
5x 2.
875 X 1.
75 Inchesweight38.
5 Oz.
downokad Product Handling Instructions Here.
*tenergy Product Is A Generic Replacement, Not The Original Oem Batfery.
*irobot??, Scooba??, Roomba Are Trademarks Of Irobot Corporation.
*tenedgy Is Not Associated With Irobot Corporation.
*tenergy Product Is Not Subject To Any Warranty By Irobot.
Still Unsure If You Are Purchasing The Correct Battery?see Our Roomba Battery Comparison Page To Find The Correct Battery For Your Unitclick Here
Manufacturer: Tenergy
SKU: 11730
15937958556
Jst-xh V2 5 Pin Adapter For Any 4 Cell Pack.
This Connector With Wire Leads Is Thd Same Type Foynd On V2 Packsthe Wire Leads Be able to Be Spliced Onto The Balancing Leads Of Any Brand Of 14.
8 Volt (4 Cell) Li-polymer Battery Pack.
120mm 22 Gauge Pvc Wirebe Sure To Check The Polarity Before Splicing.
incorrect Polarity Can Cause Pernanent Damage To A Charger Or Balancer And May Cause A Fire.
