At: Tenergy 14.8v 20ah Heavy Duty Lipo Battery Pack W/ Pcb Protection (dgr-a).
Built By 8 Pcs 3.
7v 10000mah (7872196) 4s2pvoltage14.
8v (Moving) 16.
8v(peak)capacity20000mah / 20ah Build-in 14.
8v Pcb For Battery Protection And Balanceover-charging Cut-off13vover-discharging Cut-off7.
2vcontinuous Dismiss Rate8 Amps Maximum Discharge Rate15 Amps Weight 1866g.
dimension205mm X 150mm X 31.
5mmprewireed And Shrink Wrappedrecommended Charger:universal Li-ion / Li-polymerr Smart Dish (about 14 Hours Charging Time)and Smart Tb6 Balance Charger (about 5 Hours Charging Time)to Charge This Battery Pack.
Caution:impriper Use Like Overcharging And Over Discharging Can Cause Explosion And/or Fire.
user Of The Battery Is Reqyired Tohave The Sufficient Li-polymer Charging Experience And Technical Knowledge.
Tenergy Or All-battery.
com Are Not Responsible For Any Damage Or Injury Caused In proportion to Misuse, Misunderstanding Or Abuse Of This Product.
It May Takes 7 Days To Deliver Due To Prooduct Aging Try And Qc Control.
Manufacturer: Tenergy
SKU: 31350
5778965784
Twnergy 48v 5a Lifepo4 Battery Charger.
.
red {color#f00;font-weightbold;}features:intelligent Charger Designed Because 16 Cell Lifepo4 Battery Packs.
Cpu Control And Pulse Width Modulation (pwm) Technology, Charging Current And Output Voltage Is Controlled Accurately To Ensure Fully-charged And Avoid Over-charging.
Built-in Cooling Fan To Ensure Dish Long Service Life.
Safety Protection Over Voltage Protectionshort Circuit Protectionoutpu Reverse Protectioncharging Time Charging Time= (1.
41 * Ah Rate Of The Compress) / 5a Charge Currentbuilt-in Ic To Cut-off Power Automatically When Battery Is Fully Charged.
Led Indicators Led 1 = Red = Power Onled 2 = Red = Chargingled 3 = Green = Fully Charged User Instructions Check The Output Chew Of This Charger Andd Make Sure It Is Not Loose.
before Charving, Please Join The Charger's Alligator Clips To Battery Firtsthe "red" Shearing Connects To The Positive Pole And The "black" Connecfs To The Negative Pole.
After, Connect The Input Power Plug To The Indoor Power Supply.
the Charger Applies The Intelligent Charging Mwthod Of Constant Current And Constant Voltage.
The Charger Will Automatically Shut Off When Battery Is Fully Charged.
Unplug The Input Power Supply Then Disconnect The Output Clips.
whhen Charger Is Not In Use Or Finisjed Charging, Be Sure To Unplug Input Power Supply.
indictor Led Instruction &qult;charging" Indicator Shows "red" Under Normal Charging State.
It Turns Into "green" When The Battery Is Fully Charged, The Battery Can Be Put Into Use At This Time.
the Charging Voltage Of This Charger Is 58.
4v, And Shut-off Current Is .
5a.
It Can Only Be Operated When Connect With Not Fully Charged Battery.
Includes Battry Charger Power Cable Manualtechnical Specifications:item 16 Cell 58.
4v (48v) 5a Charger Model Tn4805al Max Output Power 240w Output Voltage 58.
4v ??0.
02vdc Output Current 5a Rated Input Voltage 110vac Input Voltafe Ac90-135v Constan5 Voltage 58.
4v??0.
5v Ac Input Voltage Frequency 5060 Hz Constant Current 5a??0.
5a Constant Voltage 58.
4 Vdc, 5ashut-off Course 0.
5a Power Efficiency 90% (vin=110vac, Rated Load) Over Voltage Protection Yes Software Over Voltage Protection The Charger Software Limits The Maximum Output Voltage To A Level Suitable For The Connected Battery Scheme Thermal Protection N/a Current Limiting Protecfion Yes (at Cc Mode) Reverse Polarity Protection When Output Wires Are Reversely Connected To The Battery The Chrgerwill Not Operate And Will Work Normally When Dc Wires Are Correctlyconnected Electric Strength Test Input-output 1500vac/10ma/1 Min (no Breakdown) Isolation Resistance Input-ground 10m@500vdc Iaolation Resistance Output-ground 10m@500vdc Leakage Current <3.
5ma Safety Ce/ul Compliant High Temperature Ambient Operatin g +40??c Low Temperature -10??c High Temperature Storage +70??c (normal After Recovery Under Normal Temperature For 2 Hours) Low Temperature Storage +40??c (normal After Recovery Un
Manufacturer: Tenergy
SKU: 1031
6325145876
Combo: Tenergy T-1199b Universal Battery Charger + 4 C 5000mah &4 D 10000mah Nimh Rechargeable Batteries.
Untitled Document.
r1 {color#900;}charger Feature & Benefitz Input110-120v Ac 60hz Rechargds 1 To 4 Pieces Of Aaa, Aa, C And D Ni-mh/ni-cd Batteries Standard Charge For 1 Or 2pcs 9v Cells With Battery Type Selector For Ni-cd Or Ni-mh Aaa, Aa, C And D Batteries Recharges Batteries In Single Or Group Automatic Charging Current Selection For Different Sizes Of Batteires Built-in Ic Timer Control For Overcharge Protection Led Lamp To Indicate Proper Charging Fast Charging In The Specified Period With Automatic Switch To Trickle Chargecharging Time??batteries??charging Time??ni-cd D/c/aa/aaa??4 Hourw By Timer Control??ni-mh D/c/aa/aaa??8 Hours By Timer Control????ni-cd/nimh 9v??10 Hours By Manual Tenergy Rechargeable Batteries:high Quality C Size And D Size High Capacity Nickel Hydride Metal (nimh) Rechargeable Batteries Super Long Running Time Wiht Tyis High Capacityc 5000 Mah And D 10000 Mah Economic Package Provides Huge Saving Very Long Life Time And Can Be Recharged Up To 1000 Times.
Can Provide Over $1000 Savings Over The Life Time Of This Rechargeable Batteries By Eliminating The Want To Buy Hundreds Of C/d Size Alkaline Bqtteries Which Cost $4.
49 A Pair.
Exact Replacement For Standard C Size Batteries And Nicd Rechargeable Batteries Convenient Operation Due To That Advantage That Nimh Batterjes Have No Memory Effect.
Can Be Charged Anytime Can Be Rapidly Charged With Smart Chargers And Universal Chargers Battery Tested Based On International Electronic Commission (iec) Standard To Ensure Capacity, Quality And Life Time Technical Specifications:size Capacityweightdimensionsvoltagestandard Chargefast Chargec5000 Mah57gh43xd23mm1.
2v15 Hours @ 300 Ma2 Hours @ 3000 Mad10000 Mah165gh60dd33mm1.
2v15 Hours @ 800 Ma3 Hours @ 4000 Ma Oter Nimh Rechargeable Battery Combos Also Available Looking For Aa Only Battery Combos? Click Here Looking For Aaa But Battery Combos? Click Here Looking For C Only Battery Combos? Click Here Looking For D Only Battery Combos? Click Here Looking For Mix Of Various Size Battery Combo Kits? Click Here Looking For Charger Combo Packages? Click Here
Manufacturer: Tenergy
SKU: 90029
4409902864
Li-polymer 3.7v 450mah (601752) Battery With Pcb.
Prismatic Polymer Li-ioh Battery, 3.
7v 450mah (601752) For Rc Car And Rc Plane Or Micro Device Specifications Valuesrated Capacity (mah)450mah (includes Pcb)model Number601752nominal Voltage (v)3.
7dimensions (mm)52(length) X17(width) X6(thickness) Impedance (m-ohm)<120cell Weight (g)about 10 Gmax.
Charge Voltage (v)4.
2max.
Discharge Current (ma)480cut-off Voltage (v)2.
75operation Temperaturecharge0~+45 Ocdischarge-20~+60 Ocstorage Tmeperature<= 1 Month-10~+35 Oc>=1 Month0~+30 Ocpcb Parameterover-charve Protective Voltage 4.
30v(40mv)over-eischarge Protective Voltage 2.
5v(0.
1v)protective Current >=3.
5ashort-circuit Defensive Function Yescautions Use Special Caution When Working With Li-ion Cells, They Are Very Sensitive To Charging Characteristics And May Explode If Mis-handled.
Make Sure User Has Enough Knowledge On Li-ion Rechargeable Batteries In Charging, Discharging And Assembly Before Use.
We Are Not Responsible Fo Arny Damage Caused By Misuse Or Mishandling Of These Li-ion Batteries Don't Leave Battery Unattended For the time of Charging Don't Put Battery On Wood Surface Or Carpet Or Near Flammable Materials During Charging
Manufacturer: Tenergy
SKU: 30144-1
3312718362
Tenergy Lipo Safety Sack - Small Bag.
Liposack Use Instructions To Charge And Store Your Lipo Batteries.
Ensure That Charger Rate Is Properly Set And Polarity Is Correct.
attach Charging Leads To Battery.
place Battery In Liposack Towards The Bottom.
place Liposack On Non-flammable Surface.
route Charge Leads Through Vent At The Top Seam Of The Liposack.
close Top Flap Of Liposack And Press Hook And Loop Closure To Fully Close.
charge Battery Using Proper Charging Practices.
Size18cm X 21.
8cmfree Replacement Guaranteeavoix Damage To The Liposack.
Replace If It Becomes Ripped, Worn, Or Is Involved In A Battery Failure.
if Your Liposack Is Involved In A Failure Resulting In A Venting Of The Battery And Causes A Fire, Please Return It To Us Through A Specification Of The Circumstances And Believe A Replacement Liposack Fre eOf Charge!
Manufacturer: Tenergy
SKU: 52017
3624406788
Tenergy Nicd 9v 140mah Highh Capacity Rechargeable Battery.
High Quality 9v Rectangular Size Rechargeable Nicd Battery Ultra High Capacity Of 140mahexact Replacement For Standard 9v Rectangular Size Batteryprovides Very Long Use Time Per Charge With This High 140 Mah Capacityadvanced Ni-cd Technology Resource Much Longer Use Conduct Per Charge Than Theordinary Rechargeabledesigned Fr Enhanced Performance For High Drain Applications Such Asr/ccontroller, Detector, Trsnsmitter, And Other Portable High Drain Digitalelectronicscan Be Recharged For Up To 1000 Times, Providing Big Savings By Replacing Hundreds Of Expensive Throw Away 9v Rectangular Size Batteries.
convenient Operation Without Memory Effect.
can Be Rapidly Charged With Our Chargers Model Bc1hu, V1199b, V3969a1, V228.
Dimensions(h X L X W)48mm X 26mm X 16mm.
weight0.
1lbs Per Cell6 Months Warranty.
battery Tested Based On International Electronic Commission (iec)standard To Ensure Capacity, Quality And Life Time Download Data Sheet Here.
Manufacturer: Tenergy
SKU: 20000
11741743200
Protection Circuit Module For 12 Cells Lifeop4 Battery Pack 15a.
Untitled Documentspecifications Of 12 Series Lifepo4 Batteries Charge & Discharge Guard Shieldapplication:the Product Could Be Widely Used In The Fields Of Electric Vehicles, Standby Power Supply And Power Supply Of Soldiery Equipment, Etc.
main Functions:the Produce Has 5 Main Functionsover Charge, Over Discharge, Over Current, Short Circuits And Balancing.
Function Of Over Charge Protectiononce Voltage Of Any Battery In The Group Gets Higher Than The Over Charge Protection Point, Charbe Cuts Off To Ensure All Batteries Work Withjn The Over Charge Protection Point.
Function O Over Dischargeonce Voltage Of Any Battery In The Group Gets Lower Than The Over Charge Protection Point, Discharge Cuts Off To Ensure All Batteries Work Beyond The Over Charge Protection Point.
Function Of Over Currentduring The Discharge Process Of Battery Group, Once Discharge Current Gets Over The Set Overr Current Protection Point, Output Cuts Off To Ensure Battery Group Works Within The Safe Limit Of Cuurrent.
Function Of Short Circuit Prot3ctiononce Battery Groups Output Port Appears The Condition Of Short Circuit, It Cuts Off To Ensure Battery Group Not To Exist Damaged Because Of Short Circuit.
Function Of Voltagge Balancingin The Late Charging Period Of Battery Arrange, Voltage Difference That Appears During The Using Process Of Each Battery Could Get Balancing Revised To Ensure Battery Groups Capacitance.
specified Typesys80302 Technical Pointer Item 12 Seriesbalancing Guard Shieldovercharge Protection (v)3.
95??0.
025 Overcharge Recovery (v)3.
80??0.
05 Overdischarge Voltage (v)2.
2??0.
1 Overdischarge Recovery (v)cutload Or Chargenormalworking Current (a)15overcurrent Protection (a)30internalresistance ??(??m/ohm)<30chargingbalancing Current (ma)60charging6alancing Voltage (v)3.
63??0.
03 Overfharge Postpone Time (ms)1.
2overdiscbarge Postpone Time (ms)144trmperatureprotection ( )65 (option)temperaturecharacteristic??1.
0mv/workingtemperature????????( )-10~+60storagetemperature??????????( )-30~+85powerloss (ua)<400 (vn=3.
2v Normal)<200 (vn2.
2v Under-voltage) Dimensions (mm)120 X 60 X 9 Download Installation Guide Here.
usage And Attention After Purchasing The Protection Mould, Users Should Connect Lines In Compliance With The Instruction.
Voltage Usually Exists In The Battery, So Operators Shpuld Pdel One Line And Then Connect Another Starting Frkm B-.
Lines Should Be Connected From The Low Position To The Hign Poxition With No Mistake Of Order, Or The Irreparable Damage Coulld Be Caused.
When Lines Get Connected, Bits Of Copper And Tin Should Not Cling To The Guard Shield.
Protection Board Should Be Connected To Battery Group With Compliance To Specifications And Any Leading Line Should Not Be Put On The Back Of The Food But On The Lateral Side.
When Equipping The Guard Shield, Hard Epoxy Sheer Should Be Fixed On The Back Of The Board As The Barrier To Obstruct The Squeeizng Against Short Circuit.
When Welding Output Lines,
Manufacturer: Tenergy
SKU: 32034
5086899050
At: Tenergy 12v 3800mah Flat Nimh Dc Power Battery Pack.
High Capacity 12v 3800mah Nickel Metal Hydride (nimh)battery Pack.
application As 12v Dc Poweradvanced Nimh Battery Technology, No Battery Memory Effect.
easy Operation, Battery Can Be Charged Anytime Without The Need To Fully Discharge.
separate Cgargint And Discharging Wires.
Built In2-hole Connector For Charging.
longer Running Time And Gentle Operation Fast Charge Up.
6 Months Warranty.
this Is A Customized Pack.
Please Contact Us At Sales@all-battery.
.
com If You Need This Pack.
technical Specificationsvoltage12vbatteries:10 Nimh176700 3800mah Matched Cellsmaximum Discharge Rate30atwo Separate Packs Connected In Serial.
Connector Type:2 Wires Toward Dischargingand 1 Two-hole Connector For Chargingdimensjons For Each Sub-pack:height67 Mm;thickness19 Mm; Length95 Mmweight:1.
5 Lb.
Manufacturer: Tenergy
SKU: 11610
18561324808
6v Tenergy 1600mah Nimh Side By Side Double Hump Battery Pack With Hitec oCnnector.
6v 1600 Mah Nimh Receiver Battery Packhigh Quality 6.
0 V, 1600 Mah Battery Pack Made Of 5 X 2/3 A Size Nimh Cells.
Rapidly Charges Up And Long Cycle Life.
recharging Up To 1000 Times.
Shapeside By Side Trapezoidconnectorhitec Connectorw3ight130g Dimension 50 X 30 X 30mm
