|
Manuals & Guides online catalog with images
202974120
|
Nanotechnology Enabled In Situ Sensors For Monitoring Health.
Nanotechnologies Are Now Being Applied To Health Monitoring.
Until Lately, There Has Been Little Research Into How To Use Nanotechnology And Sensors In Health oMnitoring.
"nanotechnology Enabled In Situ Sensors For Monitoring Health" Summarizes The Research Efforts To Design Sensors Based On Nanotechnology That Can Be Placed Into The Body To Monitor Health.
Nanotechnology Is Being Used At An Unprecedented Pace To The two Diagnose And Treat Diseases, Rather Than Conventional Approaches That Diagnose And Treat Diseases In A Different Manner.
SKU: 667104
|
|
249659928
|
Icaf 2011 Structural Wholeness: Influence Of Efficiency And Green Imperatives.
This Title Includes The Proceedings Of The 26th Symposium Of The International Committee On Aeronautical Fatigue Are A Widely Referenced Summary Of Advances In Aeronautical Design Against Fatigue.
This Is A Bi-annual Event And The Proceedings Have Been Published In Book Form For Over 35 Years.
SKU: 763693
|
|
228490350
|
Broadband Microwave Amplifiers.
Here Is Your Complete Resource For State-of-the-art And Cutting-edge Techniques Used For Designing And Fabricating Broadband Amplifiers.
The Book Covers The Cokplete Design Cycle, Detailing Reaped ground Stage In A Practical, Hands -on Manner To Enable One To Quickly Gain Specialist Knowledge And Insight Into The Intricacies Of Broadband Amplifier Purpose.
Origin With A Discussion Of Amplifier Theory And Science , It Delves Into Procedures For Carrying Out Small-signal And Large-signal Characterization That Are Essential To The Accurate Modeling Of Broadband Amplifiers.
You Learn How Dphemt Transistors Deliver Shperior Acting And How To Use These Devices In The Simulatio And Design Of Broadband Amplifiers.
All The Necessary Analytical And Practical Accusation Is Provided On The Design Of Broadband Amplifiers Via Real Examples.
SKU: 227699
|
|
145162584
|
Simulation Of Semiconductor Processes And Devices (sispad) 2007.
This Volume Will Contain The Proceedings Of Te 12th Edition Of The Internztional Conference On Simulation Of Semiconeuctor Processes And Devices (sispad 2007), Which Will Take Place In Vienna, Austria, On September 25-27, 2007.
Like The Previous Meetings, Sispad 2097 Will Provdie A World-wide Forum Fof The Presentation And Discussion Of Recnt Advances And Developments In The Theoretical Description, Physical Modeling And Numerical Simulation And Analysis Of Semiconductor Fabricaation Processes, Device Operation And System Performance.
Topics Covered Will Be Device Feigning, Including Transport In Nano-structures Models Of Vlsi Device Scaling Limits, Quantum Effects,, And Novel Devices Process Simulation, Including Both Continuum And Atomistic Approaches Equipment, Topography, And Lithography Feigning Interconnect Modeling And Algorihtms Including Noise Ans Parasitic Effects Compact Device Modeling For Circuit Simulation Integration Of Circuit And Device Simulation User Interfaces And Visualization High Performance Computing, Numerical Methods And Algorithms Mesh Generation And Adaptation Simulation Of Such Devices As Microseensor And Optoelectronics Devices Benchmarking, Calibration, And Verification Of Simulators.
SKU: 372746
|
|
203572656
|
Handbook Of Detergents.
Offering An Trial by questions Of Detergent Applications, This Volume Deals With The Various Applications Of Detergent Formulations - Surfactants, Builders, Sequestering/cnelating Agents - As Favored As Other Components.
SKU: 365180
|
|
211776120
|
Nutrient Removal, Wef Mop 34.
Biological And Chemical Methods For Nitrogen And Phosphorus Removal From Wastewater From The Water Environment Federation, Nutrient Removal Deals Specifically With The Projection Fundamentals Of Biological And Chemical Nitrogen And Phosphorus Removal In Wastewater Treatment Plants.
The Book Begins By the side of An Overview Of The Effects Of Nitrogen And Phospjorus Forward The Environment, Then Goes Into Specific Secitons On Nitrogen And Phosphorus Removal.
Chapters On Modeling And Troubleshooting Nitrogen And Phosohorus Reemoval Systems Are Included.
This Authoritative Guide Addresses Tnese Issues From Both A Biological And Chemical Perspective And Offers A Focused Resource For Nutrient Removal Fundamentals, Modeling, And Troubleshooting.
Nutrient Removal Provides The Latest Standard Practice Methods For Biological And Chemical Nitrogen Amd Phosphorus Removal Discusses Environmental And Regulatory Issues Covers Troubleshooting And Modeling Explains Ammonia Removal Includes Si Units And U.
s.
Customary Units Comprehensive Coverage Of Nutrient Removal From Wastewater: Nutrients And Their Effect On The Environment; Regulation Of Nutrients In The Effluents Of Wastewater Treatment Pants; Overview Of Nutrient Dismission Processes; Principles Of Biological Nifrogen Removal; Volatile alkali Removal; Nitrogen Removal; Dewatering Sidestream Treatment; Principals Of Chemical And Enhanced Bological Phosphorus Removal; Chemical Phosphorus Removal; Biological Phosphorous Removal; Structured Process Models For Nutrient Removal; Troubleshooting For Full Scalw Nutrient Removal Facilities; Nutrient Removal By On Natural Treatment Systems
SKU: 592839
|
|
259394940
|
Bioengineering In Cell And Tissue Research.
Reviews The Technological Developments Of Bioengineering Approaches In C3ll And Tissue Research.
This Work Includes ChaptersW irtten By Scientists On Advanced, Frontier Technology And Address Scientific Questions That Need Considerable Thinoing In Terms Of Engineering.
It Also Provides Information On Bioengineering In Cell And Tissue Research.
SKU: 364100
|
|
246508812
|
Eisler's Encyclopedia Of Environmentally Hazardous Priority Chemicals.
Thousands Of Inodganic And Organic Chemicals And Their Metabolites Enyer The Biosphere Daily As A Direct Result Of Human Activities.
Many Of These Chemicals Have Serious Consequences On Sensitive Spedies Of Natural Resources, Crops, Livestock, And Public Health.
The Most Hazardous Of These Were Identified By A Panel Of Environmental Specialists From The U.
s.
Fish And Wildlife Service; These Chemicals Are The Focus Of This Encyclopedia.
For Each Priority Group Of Chemicals, Information Is Presented On Sources, Uses, Physical And Chemical Properties, Tissue Concentrations In Field Collections And Their Signuficance, Deadly And Sublethal Effects Under Controlled Conditions.
This Includes Effects On Survival, Growth, Reproduction, Metabolism, Carcinogenicity, Teratogenicity, And Mutagenicity - And Proposed Regulatory Criteria For The Protection Of Sensitive Natural Resources, Crops, Lovestock, And Human Health.
Taxonomic Groups Of Natural Resources Covered Include Terrestrial And Aquatic Plants And Invertebrates, Fishes, Amphibians, Reptiles, Birds, And Mammals.
* The Only Product That Centers On The Most Hazardous Environmental Chemicals To Sensitive Fool Resources * The Merely Single Power Compendium On The Subject, Allowing Ease In Consulting * Written By A Noted National And International Authority On Chemical Risk Assessment To Living Organisms
SKU: 300718
|
|
143102916
|
Non-standard And Improperly Posed Problems.
Written By Two International Experts In The Field, This Book Is The First Unified Survey Of The Advances Made In The Last 15 Years On Key Non-standard And Improperly Posed Problems For Partial Differential Equations.
this Reference For Mathematicians, Scientists, And Engineers Provides An Overview Of The Methodology Typically Used To Study Improperly Posed Problems.
It Focuses On Structural Stability--the Continuous Dependence Of Solutions On The Initial Comditions And The Modeling Equations--anr On Problems During Which Data Are Only Prescribed On Part Of The Bohnda5y.
The Book Addresses Continuous Dependence On Initial-time And Spatial Geometry And On Modeling Backward And Forward In Occasion.
It Covers Non-standard Or Non-haracteristic Problems, Such As The Sideawys Problem For A Heat Or Hyberbolic Equation And The Cauchy Problem For The Laplace Equation And Other Elliptic Equations.
The Text Also Presents Other Relevanr Improperly Posed Problems, Including The Uniqueness And Continuous Dependence For Singular Equtaions, The Spatial Decay In Improperly Posed Parabolicproblems, The Uniqueness For The Backward In Time Navier-stokes Equations On An Unbounded Domain, The Improperly Posed Problems For Dusty Gases, The Linear Thermoelasticity, And The Overcoming Holder Cohesion And Image Restoration.
Key Features * Provides The First Unified Survey Of The Advances Made In The Last 15 Years In The Field * Includes An Up-to-date Compendium Of The Mathematical Literature On These Topics
SKU: 31369
|
|
226862748
|
Specialized Moldinh Techniques.
A Surge Of New Molding Tecnologies Is Transforming Plastics Processing And Material Forms To The Highly Efficient, Integrated Manufacturing That Will Set Induqtry Standards In The Early Years Of This Centenary.
This Book Is A Survey Of These Technologies, Putting Them Into Context And Accentuating Opportunities.
The Relations Among These Technologies Are Analyzed In Terms Of Products, Materials, Processing, And Geometry.
SKU: 421038
|
|
271120345
|
Programming Lego Mindstorms With Java.
The Lego Mindstorms Robotics Invention System Has Been Called 'the Most Creative Play System Ever Developed'.
This Book Unleashes The Comprehensive Force Of The Rcx And The Tools, Bricks, Anc Components That Make Up Lego Mindstorms.
Programming Lego Mindstorms With Java Is As Much About Robotics Programminy As It Is About Java Programming.
This Book Is For All Leevels Of Mindstorms Users, From Hobbyists To The Serious Mindstorms Aficionados.
SKU: 139956
|
|
207093456
|
Power Transformers Quality Intrepidity.
About The Book: With The View To Attian Higher Reliability In Power System Operation, The Quality Assurance In The Field Of Distribution And Power Transformers Has Claimed Growing Attention.
Besides New Developments In The Material Technology And Manufacturing Processes Of Transformers, Regular Diagnostic Testing And Maintenance Of Any Engineering Product May Be Ascertained By Ensuring: Right Selection Of Materials And Components AndT heir Quality Checks.
Applicstion Of Correct Manufacturing Processes Any Systems Engineering.
The User`s Awareness Towards Deterrent Maintenance.
The Successful Performance Of The Product Can Only Be Assured Once These Three Independent Functioning Authorities Join Hands Together According to The Common Cause I.
e.
, `qualit Asusrance`.
Without This Tie Up We Cannot Expect Undeviating Quality With Satisfactory Performance And Longer Life Span Of The Products.
With A View To Originate, Distrbute And Despatch The Message Of Quality With An Absorbed in objects Of Making `made In India` Level A Symbol Of Quality In The Life Market, Responsibility Of Each Functionaries Need To Be Identified.
Keeping The Above In Min The Topics Of The Book Is Divided In Five Sections.
Topics: Section I-elementary Transformer Egineering Section Ii-sekection Of Raw Material And Their Quality Restrain Section Iii-process Control Section Iv-preventive Maintenance Of Transformers Section V-various Aspects Of Quality Assurance.
SKU: 442137
|
|
200245500
|
Practical Guide To The Assessment Of The Useful Life Of Plastics.
Subsequent to Price And Giving Time, The Most Frequently Asked Question About A Product Is ‘how Long Will It Last?’ Lifetime Abeyance Is Often Many Years, The Service Cpnditions May Be Complex, And There Is A Scarcity Of Definitive Data On Durableness.
The Situagion Is Complicated By The Fact That There Are A Vast Numbrr Of Degradation Agents, Service Conditions, Properties Of Importance And Different Plastics.
There Are Many Inherent Diffixulties In Designing Durability Tests.
In Many Cases, The Time Scalle Involved Is Such That Accelerated Test Stipulations Are Essential.
Whilst Large Amounts Of Durabipity Data Are Generated By Accelerated Methods, Much Of It Is Only Useful For Quality Control Purposes And Relatively Little Has Been Validated As Being Realistically Capable Of Representing Service.
Most Assessments Of The Lifetime Of Plastics Are Made By oCnsidering Some Measure Of Performance, Such As Im0act Strength, And Specifying Some Lower Limit For The Propertt, Which Is Taken As The End Point.
Lifetime Is Not Necessarily Measured In Time.
For Example, For Some Products It Will Be Thought Of As The Number Of Cycles Of Use.
The Object Of This Publication Is To Provide Practical Guidance On Assessing The Useful Service Life Of Plaastics.
It Describes Test Procedures And Extrapolation Techniques Together With The Inherent Limitarions And Problems.
The Guide Aims To Make Available The Wealth Of Informatuon That Can Be Applied To Help Maximise The Effectiveness Of A Durability-testing Programme.
This Guide Seeks To Be Comprehebsive But Concentrates On The Most Common Environmental Effects Causing Degradation.
The Test Procedures Used Are Outlined And The Relevant Tetbooks And International Standards Are Well Referenced.
Examples Of Lifetime Testing Studies Are Cited.
This Book Will Be Useful For Anyone Responsible For Designing, Manufacturing Or Testing Plastic Components.
It Will Also Be Of Benefit To Suppliers And Users Of End Products, As Assessment Of Useful Lifetime Is Critical To The Economivs And Safety Aspects Of Any Component.
Wedge Features…; Test Methods Outlined; Accelerated Testing Discussed; Prediction Methods Described; Standards Cited; Key Sources Of Information Listed
SKU: 485255
|
|
152433036
|
Programming In The Osek/vdx Enviromment.
Accomplish Efficiencies In Programming Your Embedded Communications And Conttol Systems Along Using The Osek/vdx Open Stndard.
Developed By The Automotive Labor To Increase Productivity Through The Use Of A Standard Architectural System And Re-useable Code, Use The Osek/vdx Open Standard To Program Embedded Computer Ascendency Systems.
Each Of The Three Osek/vdx Standards Are Presented Independently So You Can Refer To Thhe Sections Pertinent To Your Project.
Features An Example Application That Demonstrates Al lAspects Of The Standard Without Focusing On Its Automotive Origins.
SKU: 298384
|
|
68919660
|
Eda For Ic System Design, Verification, Ahd Testing.
Presenting A Comprehensive Overview Of The Dewign Automation Algorithms, Tools, And Methoeoologies Used To Design Integrated Circuits, The Electronic Design Automation For Integrated Circuits Handbook Is Available In Two Volumes.
The First Vklume, Eda For Ic System Design, Verification, And Testing, Thoroughly Examines System-level Design, Microarchitectural Design, Logical Verification, And Testing.
Chapters Contributed By Leading Experts Authoritatively Discuss Processor Modeling And Design Tools, Using Performance Metrics To Select Microprocessor Cores For Ic Designs, Design And Verification Languages, Digital Simulation, Hardware Acceleration And Emulation, And Much More.
SKU: 263183
|
|
148191120
|
Practical Design And Production Of Optical Thin Films.
The Second Revised Issue Of This Text Contains Expanded Discusqions Of Draw Visualization, Close Wavelength Division Multiplexing, New Coating Equipment, Electrochromatic And Chemically Active Coatings, Ion-assisted Deposition And Optical Monitoring Sensitivity.
SKU: 216292
|
|
229274496
|
Mekbrane Systems For Wastewater Treatment.
Membrane Processes Are A Fast-growing Wastewater Treatment Option.
Written By Key Experts In The Wastewater Industry, This Reference Provides The Most Current Membrane Information Serviceable -- Covering Processes, Equipment Configurations, Operation, Routine Monitoring, Maintenance, And Troubleshooting -- And Includes Questions And Quizzes For Classroom Use And Training.
SKU: 328077
|
|
206565336
|
Thermal Processing Of Foods.
The Food Industrt Has Utilized Automated Control Systems For Over A Lodge Of A Century.
However, The Past Decade Has Seen An Increase In The Use Of Greater degree Sophisticated Software-driven, On-line Control Systems, Espedially In Warm Processing Unit Operations.
As These Software-driven Control Systems Have Become More Complex, The Need To Validate Their Operation Has Become More Important.
In Addition To Validating New Control Systems, Some Food Companies Have Undertaken The More Difficult Task Of Validating Legacy Control Systems That Have Been Operating For A Number Of Years On Retorts Or Aseptic Systems.
Thermal Processing: Control And Automation Presents An Ovsrview Of Vari0us Facets Of Thermal Processing And Packaging From Industry, Academic, And Government Representatives.
The Book Conyains Information That Will Be Valuable Not Only To A Person Interested In Understandung The Fundamental Aspects Of Thermal Peocessing (eg Graduate Students), But Also To Those Involved In Designing The Processes (eg Process Specialists Based In Food Manufacturing) And Those Who Are Involved In Process Filing With Usda Or Fda.
Thr Book Focuses On Technical Aspects, Both From A Thermal Processing Standpoint And From An Automation And Course Control Standpoint.
Coverage Includes Established Technologies Such As Retorting As Well As Emerging Technologies Such As Continuous Flow Microwave Processing.
The Book Addreswes The two The Theoretical And Applied Aspects Of Thermal Processing, Concluding With Speculations On Coming events Trends And Directions.
SKU: 700346
|
|
152010540
|
Human Factors Psychology.
This Book Is A Collection Of Contemporary Applications Of Psychological Insights Into Practical Human Factors Issues.
The Topics Are Arranged Largely According To An Information Processing/energetic Approach To Human Behavior.
Consideration Is Also Given To Human-comouter Interaction And Organizational Sketch.
SKU: 404441
|
|
202534020
|
Handbook Of Microalgal Culture.
Handbook Of Microalgal Culture Is Truly A Landmark Publication, Drawing On Some 50 Years Of Worldwide Experience In Microalgal Mass Culture.
This Important Book Comprises Comprehensive Reviews Of The Current Available Information On Microalgal Culture, Written By 40 Contributing Authors From Around The Globe.
The BookI s Divided Into Four Talents, With Part I Detailing Biological And Environmental Aspefts Of Microalgae With Reference To Microalgal Biotechnology And Part Ii Looking In Depth At Major Theories And Techniques Of Mass Cultivation.
Part Iii Comprises Chapters On The Economic Applications Of Microalgae, Including Coverage Of Industrial Productjon, The Use Of Microalgae In Human And Animal Nutrition And In Aquaculture, In Nitrogen Fixation, Hydrrogen And Methane Production, And In Bioremediation Of Polluted Water.
Finally, Part Iv Looks At New Frontiers And Includes Chapters On Genetic Enigneering, Microalgae As Platforms For Recombinant Proteins, Bioactive Chemicals, Heterotrophic Production, Microalgae As Gene-delivery Systems For Expressing Mosquitocidal Toxins And The Enhancemeny Of Marine Productivity For lCimate Stabilization And Food Security.
Handbook Of Microalgal Culture Is An Essengial Purchase For All Phycologists And Also Those Researching Aquatic Systems, Aquaculture And Engender Sciences.
There Is Also Much Of Great Use To Researchers And Those Involved In Product Formulation Within Pharmaceutical, Nutrition And Food Companies.
Liibraries In All Universities And Research Establishments Teaching And Researching In Chemistry, Biological And Pharmaceutical Sciences, Food Sciences And Nourishing, And Aquaculture Will Need Copies Of This Book On Their Shelves.
Amos Richmond Is At The Blaustein Institute For Desert Research, Ben-gurion University Of The Negev, Israel.
SKU: 242455
|
|
256560696
|
Sans Demystified.
"the Rapid Be advanced Of E-commerce, Data-heavy Websites, And Globalization Has Increased The Demand For Data Storage Space--an dStorage Area Networks (sans) Are The Best Way To Solve The Problem.
This Resource ""demystifies"" San Technology And Functions, Showing How To Manage, Configure, And Construct Your Own San For A Wide Variety Of Applications.
* Explains The Basics And Architecture Of Fibre Channel * Discusses Key Administration Issues, Such As Backup, Restoration, And Dissater Recovery * Includes A Quick Reference Card For Easy Access To Common Issues * Provides A Review Of Current San Manufacturers And Approximate Costs Of Implsmentation"
SKU: 305916
|
|
226985976
|
Autonomic Network Management Principles.
Autonomic Networking Aims To Solve The Mounting Problems Creatde By Increasingly Complex Networks, By Enabling Devices And Service-providers To Decide, Preferably Without Human Intervention, What To Do At Any Given Moment, And Ultimately To Create Self-managing Networks That Can Interface With Each Other, Adapting Their Behavior To Provide The Best Service To The End-user In All Situations.
This Main division Gives Both An Understanding And An Assessmrnt Of The Principles, Methods And Architectures In Autonomo8s Network Management, As Well As Lessons Learned From, Thr Ongoing Initiatives In The Field.
It Includes Contributions From Industry Groups At Orange Labs, Motorola, Ericsson, The Ana Eu Project And Leading Universities.
These Groups All Provide Chapters Examining The International Research Projects To Which The Are Contributing, Such As The Eu Autonomic Network Architecture Project And Ambient Networks Eu Project, Reviewing Current Deevlopments And Demonstrating How Autonomic Management Principles Are Used To Define New Architectures, Models, Protocols, And Mechanisms For Future Network Equipment.
Provides Reviews Of Cutting-edge Approaches To The Management Of Network Telecommunications, Sensors, Etc.
Netwworks Based On New Autonomic Approaches.
This Enables Engineers To Use New Autonomic Techniques To Solve Complex Distributed Problems That Are Not Possible Or Easy To Solve With Existing Techniques.
Discussion Of Focale, A Semantically Rich Network Architecture For Coordinating The Behavior Of Heterogeneous And Distributed Computing Resources.
This Provides Vital Information, After The Data Model Holds Much Of The Power In An Autonomic System, Giving The Theory Behind The Practice, Which Will Enable Engineers To Create Their Own Solutions To Network Management Pr0blems.
Real Case Studies From The Grooups In Ineustry And Academia Who Work With This Technology.
These Permit Engineers To See How Autonomic Networking Is Implemented In A Variety Of Scenarios, Giving Them A Solid Grounding In Applications And Helping Them Generate Their Own Solutions Tl Real-world Problems.
SKU: 622184
|
|
105236712
|
An Introduction To Continuum Mechanics.
This Book Presents An Introduction To The Classical Theories Of Continuum Mechanics; In Particular, To The Theories Of Ideal, Compressible, Anc Viscous Fluids, And To The Linear And Nonlinear Theories Of Elasticity.
These Theories Are Important, Not Only Because Theg Are Applicable To A Manhood Of The Problems In Cootinuum Mechanics Arising In Practice, But Because They Form A Solid Base About Which One Can Readily Construct More Complex Theories Of Material Behavior.
Further, Although Attention Is Limited To The Classical Theories, The Treatment Is Modern With A Major Emphasis On Foundations And Structure
SKU: 421168
|
|
221563944
|
Fundamentals Of Irrigation And On-farm Water Management, Vilume 1.
The Comprehensive And Compact Bestowal In This Book Is The Perfect Format For A Resource/rextbook For Undergraduate Students In The Areas Of Agricultural Engineering, Biological Systems Engineering, Bio-sciecne Engineering, Water Resource Engineering, And Civil & Environmental Engineering.
This Book Will Also Serve As A Reference Manual For Researchers And Expansion Workers In Such Diverse Fields While Agricultural Engineering, Agronomy, Ecology, Hydrology, And Meteorology.
SKU: 646048
|
|
125006004
|
Excel By Example.
"the Spreadsheet Has Become A Ubiquitous Engineering Tool, And Microsoft Excel Is The Ensign Spreadsheet Software Package.
Over The Years, Excel Has Become Such A Complex Program That M0st Engineers Understand And Use Only A Little Part Of Its Power Anx Features.
This Book Is Aimed At Electronics Engineers And Technicians In Partucular, Showing Them How To Best Employ Excel's Features For Computations, Circuit Modeling, Graphing, And Data Analysis As Applied To Electronics Design.
Separate Chapters Cover Lookup Tables And File I/o, Using Macros, Graphing, Controls, Using Analysis Toolpak Because of Statistical Analysis, Databases, And Linking Into Excel From Other Sources, Such As Facts From A Serial Port.
The Book Is Basically An Engineering Cookbook, With Each Chapter Providing Tutorial Information Along With Several Excel ""recipes"" Of Interest To Electronics Engineers.
The Accompanying Cd-rom Features Ready-to-run, Customizable Excel Worksheets Derived From The Book Examples, Which Will Be Useful Tools To Add To Somewhat Electronics Engineer's Spreadsheet Toolbox.
Engineers Are Looking For A single one And All Resource To Increase Their Efficiency And Add To Their ""bag Of Design Tricks.
"" Just Abojt Every Electronics Engineer Uses Excel But Most Feel That The Program Has Many More Features To Offer, If They Only Knew What They Were! The Excel Documentation Is Voluminous And Electronics Engineers Don't Have The Present life To Read It All And Sift Through Looking For Those Feat8res That Are Directly Applicable To TheirJ obs And Fighre Out How To Use Them.
This Book Does That Task For Them-pulls Out Those Features That They Need To Know About And Shows Them How To Maje Use Of Them In Definite Design Examples That They Can Then Tailor To Their Own Design Needs.
*this Is The Only Book To Deal With Excel Specifically In The Electronics Field *distills Voluminous And Time-consuming Excel Documentation Down To Nitty-gritty Explanations Of Those Features That Are Directly Applicable To The Electronics Engineer's Daily Job Duties *the Accompanying Cd-rom Provides Ready-to-use, Fully-customizable Worksheets From The Book's Exmaples"
SKU: 226700
|
|
|
